it achieves all the requirements, work fine on c200v2, and is much simpler
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26933 a1c6a512-1295-4272-9138-f99709370657
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
detect wraps so we don't miss the value we were waiting for
fix audio stuttering on fuzev2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25740 a1c6a512-1295-4272-9138-f99709370657
Use it in fuzev2 to improve some big delays (correct the biggest one to actually wait for the fifo to empty), and use it in the sd drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25734 a1c6a512-1295-4272-9138-f99709370657
- cache IRAM and DRAM
- map IRAM just next to DRAM to remove the need for -mlong-calls and reduce binsize
- tweak delays in Fuze button code
- tweak delays in Clip button code (down button sometimes doesn't respond anyway : an alternate driver is being worked on)
Before reporting any problem, please check your filesystem or format your player from the OF
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21228 a1c6a512-1295-4272-9138-f99709370657
Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657
Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657
Use a 24MHz peripheral clock instead of 64MHz for battery life
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19234 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 16:46:12 +00:00
Renamed from firmware/target/arm/as3525/sansa-clip/system-target.h (Browse further)
