PMU interrupts are used to detect USB Vbus, wall adaptor, accessories
and holdswitch. A thread is needed to poll the PMU throught I2C, ATM
it does nothing but showing the state of the inputs on the HW debug
menu, funcionallity for each individual input will be added in next
patches.
Change-Id: If93bf2044d1052729237a7fd1431c8493e09f1c7
This should allow FireWire charging to work on these devices.
It also adds charging state detection on the iPod Classic.
(cherry picked from commit fa86fec4fb)
On Classic (and probably Nano 2G), it seems that the 100/500mA limit
applies only to USB chargers, when FW is connected it supplies all the
power (even if USB is also connected) and USB current limit does not
affect to FW charging, therefore the limit is only set when USB is
connected.
Change-Id: I7c6bab1b6a0f295367999c45faeda6085c3fb091
Signed-off-by: Cástor Muñoz <cmvidal@gmail.com>
Reverts commit ead38dbc9d
It was introduced as a temporal workaround to avoid the endless restart
loop when battery is low, but really it is useless. The bootloader should
ensure that there is enough power to launch Rockbox even in the worst
scenario.
Change-Id: Iabebed40c9241af915c16c3c6c4d3c6deef7680e
This patch limits the drawn USB current to 100/500mA, instead of
the actual 200/1000mA settings. It also initializes other USB power
related GPIOs.
Solves some USB disconnect issues: FS#12990, FS#12956. I am using a
powered USB HUB with no problems (Vusb=5.05V unloaded), but there
are lots of USB disconnects when using the motherboard USB ports
(Vusb=4.91V), this patch solves all my issues.
Actually, it seems that the USB current drain is limited to 1000mA,
when a load peak occurs most USB2 ports deliver more than 500mA, as
current consumption increases the USB voltage decreases, an excesive
voltage drop produces USB disconnections. Limiting USB current drain
to 500mA also limits the voltage drop, preventing subsequent USB
failures.
Anyway, to minimize voltage drop, it is recommended to use quality
cables and preferably connect to USB ports with higher Vusb.
Change-Id: I1b931aa18ec93bfd1214e475a72e42893eff52f6
Actually Rockbox does not use this mode, it is supported by
other iPods, so implemented on Classic as well.
Change-Id: Ia6578506df27a95a7f7522b3034b764631a8bb3a
This patch implements HAVE_ADJUSTABLE_CPU_FREQ, it modifies the
following parameters when CPU is unboosted:
- s5l8702 voltage is decreased: 1.200V -> 1.050V
- CPU frequency is divided by 4: 216MHz -> 54MHz
- AHB frequency is divided by 2: 108MHz -> 54MHz
Change-Id: I2285b83efb7e1567864ac288f2d4ba55f058f7c5
Major known issues:
- No bootloader yet
- No support for the first-generation 160GB CE-ATA hard disk drive yet
- Audio playback is slow, only FLAC seems to reach realtime
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28953 a1c6a512-1295-4272-9138-f99709370657
