Retrieve the processes running at startup and compare with a list of
potentially problematic ones. Right now this is Itunes which is known to be
able to cause problems when trying to install the bootloader on an Ipod. No
user notification yet.
This adds the implementation for Windows.
Change-Id: I5ce8a85da52e0ed8f523b5ae6fb5d8f14f6a14c9
Several devices require the original firmware to be able installing the
bootloader. Most vendors distribute the firmware file in zip format. Extend
reading the original firmware file to support reading the file from the zip
directly instead of requiring the user to separately extract it.
Change-Id: Ic4e89053456d8f7d6adc294f6657aceddbc354ba
Instead of checking the settings on startup set only the device display.
Otherwise the settings are checked directly on startup and after finishing the
build information download, which leads to the configuration dialog getting
opened twice.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31593 a1c6a512-1295-4272-9138-f99709370657
Update the target values in the main window immediately on startup. Downloading
the target information might not complete successfully, and in that case a
previously selected target will not be shown. If the target information
download finishes the displayed values are updated again (to show target status
information).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31546 a1c6a512-1295-4272-9138-f99709370657
Targets with special case URL for the manual (i.e. targets that share the
manual with another target, f.e. h100 series) have been forgotten during the
target renaming. Update those names and convert the manual URL handling to
be template based.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30848 a1c6a512-1295-4272-9138-f99709370657
The Speex codec has a special license requiring it to be reproduced with any
distribution. Add the license as a separate tab in the About dialog to satisfy
this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30816 a1c6a512-1295-4272-9138-f99709370657
When changing the language don't require a restart anymore. Instead listen to
the appropriate changeEvent and retranslate the UI. Designer generated UI files
already provide such a function.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30633 a1c6a512-1295-4272-9138-f99709370657
On Windows extend the QIcon used as window icon with the bigger Rockbox icon as
well. W7 wants a larger one for the taskbar if large icons are enabled, and for
the task switcher. Scaling the small one up looks ugly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30630 a1c6a512-1295-4272-9138-f99709370657
On OS X Configure and Quit menu entries are not placed in the File menu. Qt
handles that for us if they are not translated, and translations are then
handled automatically (as well as setting the OS X specific accelerator keys).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30147 a1c6a512-1295-4272-9138-f99709370657
When its possible to retrieve the label of the selected mountpoint display it
in the main window too. Right now this only affects Windows.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30143 a1c6a512-1295-4272-9138-f99709370657
The proxy settings are stored as string representation in the configuration
file. If username / password contains characters used as separators parsing the
string again will cause wrong results. Percent-encode them before storing, and
parse it as percent-encoded string when reading it back.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30071 a1c6a512-1295-4272-9138-f99709370657
The "file" bootloader installation method usually can uninstall the bootloader.
Some upgrade methods (like the Iaudio players) remove the bootloader file
placed on the player after upgrading so those can't uninstall the bootloader.
Instead of rejecting uninstallation for all players using this method check the
current bootloader and only display an error if no suitable bootloader is
found (which would happen in the Iaudio case).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30070 a1c6a512-1295-4272-9138-f99709370657
The regexp used when displaying the names didn't take into account that names
could start with non-ASCII letters. Use a different approach when filtering the
header to make them not disappear.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29803 a1c6a512-1295-4272-9138-f99709370657
This change fixes problems with zip files created with newer zip utilities (a
known issue is the iLike theme). QuaZip also allows better feedback during
operations without changing the imported code. Additionally Rockbox Utility and
the Theme Editor are now both using QuaZip; currently Rockbox Utility uses a
copy of the sources, merging them later is planned.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29645 a1c6a512-1295-4272-9138-f99709370657
Remove the "64bit" part of the filename before comparing. We're checking for
that in the filename explicitly but the version number doesn't contain it, so
the comparison will otherwise misinterpret it as additional version
information.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29617 a1c6a512-1295-4272-9138-f99709370657
The version check failed on subrelease versions (as the 1.2.5-1 rebuild done
for Mac) and detected an updated version that is in fact an outdated one.
Rework the comparison completely, move it to the Utils class and display some
more information in the status bar upon update check. Especially keep a notice
in the status bar if an updated version was found.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26788 a1c6a512-1295-4272-9138-f99709370657
As with the voice file installation changed in r26637 the same issue exists for
fonts. While the fonts package rarely changes and therefore this shouldn't
have had a negative impact in the past use the correct font package anyway.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26667 a1c6a512-1295-4272-9138-f99709370657
Check the installed Rockbox and install release voice file if a release is
found. Fixes wrong voice file getting installed for releases, which especially
showed up with the recent lang file cleanup. This is likely to be the cause for
FS#11362.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26637 a1c6a512-1295-4272-9138-f99709370657
Downloading the build information was done before setting the global proxy
values, so this broke in environments that completely block non-proxy
connections. Explicitly set the proxy on startup before downloading other
things. Remove some duplicated code. Fixes FS#11163.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26504 a1c6a512-1295-4272-9138-f99709370657
Make the Windoes binary try to detect if it's running under Wine. Display a
warning if so, as Rockbox Utility is likely to fail in all kind of strange ways
when running on Wine. We do provide Linux binaries, so it's not even a good
idea to try running under Wine at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25471 a1c6a512-1295-4272-9138-f99709370657
Move class-less functions in utils.cpp into a new Utils class and make the old
functions static. This prevents clashes with system C functions. Rename some
functions to avoid macro problems (check() is a macro on OS X). Split out the
RockboxInfo class into a separate file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25441 a1c6a512-1295-4272-9138-f99709370657
Don't listen to requestFinished() signals for background downloads. The
only information needed is the done() signal. Fixes multiple error
messages popping up on unreachable network.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25430 a1c6a512-1295-4272-9138-f99709370657
Create a svg version of the clef icon for Rockbox Utility and set it as window
icon on Linux; icon created from the svg logo in the manual. Addresses
FS#11094.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25385 a1c6a512-1295-4272-9138-f99709370657
The System Trace isn't preserved when quitting Rockbox Utility. Change this so
the last trace is saved in the cache folder, and add a button to the trace
window to allow easy saving it. Should help in cases where users have problems
but restart Rockbox Utility before saving the trace.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25313 a1c6a512-1295-4272-9138-f99709370657
Use the buildserver modelname for downloading files. The Platform setting is
the internal Rockbox Utility value, which might contain an additional
identifier needed internally only. Broken download links reported as part of
FS#11109.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25206 a1c6a512-1295-4272-9138-f99709370657
This will also cause the archives created by deploy-release.py to use the new
binary name, so also update the update checking code to accept any base
filename when retrieving version numbers from the download server.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24980 a1c6a512-1295-4272-9138-f99709370657
This makes it possible for native dialogs to get used on Windows and OS X. The
mountpoint selection dialog needs special handling and still uses the
BrowseDirtree class for now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24703 a1c6a512-1295-4272-9138-f99709370657
Similar to removing the separate CREDITS file for the manual remove the
rbutil one as discussed on IRC.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24329 a1c6a512-1295-4272-9138-f99709370657
