headphone ADC thread stack was slightly too small. Bump it up a bit.
(it was _perfectly_ sized for the prior older toolchain+optimization flags...)
Change-Id: I2ca67c2b85c54f879892a31e281d7696f893389c
Instead of 'ifdef ENABLEPLUGINS' (which always gets set) use
'ifeq(yes,$(ENABLEPLUGINS))' which means any value other than 'yes' is
treated as a negative.
Change-Id: I6c92eef5565328f1bb9f64a4d379dec697354224
Use of IF_COP_CORE was mistakenly introduced as part of 89acde6af2,
effectively short-circuiting multiple tests resulting in the code
paths always being executed, on both cores.
Use the correct macro, so per-CPU paths are handled properly.
Change-Id: Id346cf759fc1b06b7d56694d7af1f469caf785a4
This appears to finally fix the issue
turns out the status register we were writing was only for the CPU
COP cache flush wiped out the CPU cache
--
Added some defines to cut down on the magic numbers
Added some comments explaining such
Set the address to full 20 bit address
0x1FFFFF which is then left shifted 11 internally -- somewhere around 4GB?
Link explains the cache status bits
https://daniel.haxx.se/sansa/memory_controller.txt
Change-Id: I57b7187c2f71a5b54ce145bf3a21ed492a8993cb
Note: It's marked as 'unusable' right now, so it won't show up
on build.rockbox.org, nor will daily & voice files be
created.
Change-Id: I5ea133477a6b4c0296c46757d0375994ad812cc5
Enable its use in the jz47xx MIPS targets.
(accidently committed g#3249 before making these changes)
Change-Id: I1791946f632901f0c7a94b04b009671aa0d71717
This is just a minor cleanup of Solomon Peachy's code, and using
per-filesystem buffers instead of a single static buffer.
Tested and working on the FiiO M3K.
Change-Id: I3c19e8cc24e2f8aa07668c9d1c6d63364815050a
Text entry keymap was almost completely backwards, and it was
impossible to submit without adding one last character.
Change-Id: I40a224fe20e228c5e4670dd6583318918c59c827
This uses the new unicode string literal feature that is available
now to greatly simplify the initialization of these special string
types. This makes them much more readable at a quick glance.
Change-Id: Iad8b49aa763486608e3bb7e83fb8abfb48ce0a7b
-- apparenty 0x4 aligned doesn't work properly
requires 0x8 alignment at least for the h10 20gb
but enabled for all processors that define MEM_ALIGN_ATTR
Change-Id: I11edaab183b91a6d158f1f439f173b9b699dc914
-- apparenty 0x4 aligned doesn't work properly
requires 0x8 alignment at least for the h10 20gb
but enabled for all arm processors
assign the default framebuffer to the default_vp as well
Change-Id: I0b76c30f2ddb5d6d2f7c6a132e4081aee58da17b
The function to check whether a playlist has been modified
will now only try to resume a playlist, if the global resume index
is not -1.
This also means that replacing a finished (modified) playlist will not
produce a warning anymore if Rockbox has been restarted in
between. In that respect, the behavior is identical to
what it was *before* 46085c8978.
Change-Id: Ib95f89043274f1c72c75023d1506fc093aaf4cf9
In the old position of the call, the first battery reading would
be made before initializing the target's power management code.
If the target needs to initialize before giving a battery reading,
then the first reading would be wrong and the power thread might
inappropriately shut down based on a false zero reading.
The new position avoids forcing special-case logic onto the target
power management code.
Change-Id: I483cfabe30c6881d80a1094fd526fa0065523d19
Tested on erosq
Added ability to disable all softlock notifications. Setting is
"Disable All Lock Notifications" under Advanced Key Lock
Settings.
Tested to make sure it doesn't interfere with backlight
exemptions, keylock exemptions, or first press enables backlight
only. When enabled, this overrules the existing Disable Notify
setting, which only disables the reminders when a button is
pressed while the device is already locked.
Also changed phrases in the Advanced Key Lock settings menu
to make it more obvious what the options do. Changed
LANG_ACTION_PLAY, LANG_ACTION_SEEK, and LANG_ACTION_SKIP from
"[button]" to "Exempt [button]". These language changes will
also affect the Backlight Exemptions list, but the wording
should be appropriate there as well.
Added LANG_SOFTLOCK_DISABLE_ALL_NOTIFY and LANG_ACTION_VOLUME,
changed LANG_VOLUME to LANG_ACTION_VOLUME in display_menu.c
for consistency.
Change-Id: I914fe154ba5d508a842165aea7c7755e4e6b9c57
According to the ATA specification this bit is used to indicate
either an ATA device or a CF compatible card. We use it currently
to indicate CF compatible status. So let's change the wording
accordingly.
Change-Id: Iee87197dee80e6225e4c62c40bceedfbc4e659c2
This allows the user to make use of the DAC's power-saving abilities.
The two modes are "high performance" and "battery saver". This feature
is supported by the AK4376 DAC in the upcoming FiiO M3K port.
The setting is only a manual toggle right now, but in the future it
could be hooked up to the battery level (via another setting) so it
can be toggled automatically when the battery gets too low.
Change-Id: I482af6e2f969fcbdeb3411bd3ff91f866b12d027
This reports the ATA device type bits in a human readable format
so that users can easily identify what their ATA device is claiming
to be. This is mainly useful for troubleshooting a possible source
of compatibility issues with their DAP. As such this is mainly an aid
to CF modders.
Change-Id: I40f581fc0805a2753789452373cc6e179d8f3074
As per multiple user requests:
https://forums.rockbox.org/index.php/topic,53319.msg
The acceptable size for id3v2 fields currently maxes out at
240 bytes on targets with more than 2MB of memory.
The comments field, especially for Podcasts, can sometimes
contain significantly more characters than Rockbox allows.
The limit for devices with more than 8MB of memory
is increased to 500 bytes for individual fields, and
to 1800 bytes for the buffer containing all fields.
Change-Id: I4593372229158756f102f67bcc4a43e64f632d58
tested on erosq
On devices with both a backlight and a softlock button, currently
pressing the softlock button while the screen is off and the keypad is
unlocked will wake the screen and also lock the keypad. Presumably, the
user's intention is to use the device when they hit the softlock button
in this state, so wake the screen without locking the keypad.
Change-Id: Ib00e1c37142e5d3d9317775de5cf0dd67f3f2569
wiped out the lang id check which causes shortcuts menu to
pop error message when browsing to folders
shortcut menu uses the return to check for validity
Change-Id: I30061f034f99ea66844e45ea842e52843ea6062b
if you ran a plugin from shortcut menu that originated from the WPS
next time you pressed select in the wps it would attempt to run the
wps context plugin
Change-Id: Id72eb6a20522586efeb479aea0b1c50b53942346
leave plugin entries in ram and try not to save them unless necessary
doesn't use more space just a bit of careful ordering with the buffer
Change-Id: I1973e9ad4655c2544f596b37cee35601a0cffa94
The ACTION_TREE_WPS (held back button) was a part of the mainmenu context, moved to list context so it would work in Files and Database as well for consistency.
Change-Id: I3749d7b4fd041db80e81c1a79d30c2c7bdd64829
- note that availability of options depends on player state
- present options that only insert tracks separately from those that also remove tracks
- add short intro for the latter.
Change-Id: Ie99ef7dff77da0cb136c761da1c11f83936f86f5
Music currently doesn't begin playing after the user has selected a new song from a playlist or using the database/file browser, unless another item was already playing or the previous player state was "stopped" but not "paused". This results in an inconsistent user experience. The user's likely intention is to immediately listen to a song they select regardless of the previous player state.
Change-Id: I574c3fe5c12fee544da0569182fc9573d307ac2f
(as per multiple user requests)
When playback is stopped, Rockbox will display an option to
clear the current playlist and add selected tracks in random order, if
Shuffled Adding options are enabled in Settings.
Insert options will not be displayed anymore when playback is stopped to
lessen confusion.
Change-Id: I5e5819149027e63e5c6f30213e838c0d7e7de8d5
Rockbox would previously not present a warning when you were about
to replace a modified playlist after restarting the player,
unless you first resumed playback.
Change-Id: I9752228f84b105747e41ce6e1c8f95f0f9f14c10