It is read separately, and so backlight/buttonlight can be disabled
while hold switch is on
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19302 a1c6a512-1295-4272-9138-f99709370657
We set directly the needed bits to write into DBOP_DOUT (15:13 and 3:0)
Since we can't set the mask 0xf00f with one mov instruction, revert the
logic and use orrne instead of biceq (in the whole function for consistency)
Fix suggested by Jens Arnold
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19279 a1c6a512-1295-4272-9138-f99709370657
Use a 24MHz peripheral clock instead of 64MHz for battery life
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19234 a1c6a512-1295-4272-9138-f99709370657
We don't need to mess with CCU_IO register (it's only needed for targets
with a SD slot) so don't keep its value when changing buttonlight
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19139 a1c6a512-1295-4272-9138-f99709370657
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
Revive lcd_enable() as well, and use it in _backlight_on/off()
Don't update the lcd framebuffer if the display is off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18952 a1c6a512-1295-4272-9138-f99709370657
