The hardware watchdog automatically shutdown the device after 10s of
inactivity, being defined as 10s without the tick IRQ fired (aka braindead
device).
The software IRQ mechanism is more interesting: it uses a very high priority
timer setup as one-shot to trigger after 5s of inactivity (but IRQ still
enabled). When detected, it patches the running code to insert a SWI
instruction so that on interrupt return it will trigger a SWI and produce
a meaningfull backtrace to debug the deadlock. This should allow to debug
freezes in IRQ context.
Change-Id: Ic55dad01201676bfb6dd79e78e535c6707cb88e6
Rewrite IRQ handling to allow nested IRQs: on each IRQ entry, we save the
parameters on the (IRQ) stack and then switch to SVC mode (with its own
stack) and renable interrupts. Make sure interrupt is properly acknowledged
by using the read side-effect (RSE) mode and handle priority levels as well.
Change-Id: I3fd68289b430c56bdd256868939238ff268e42b4
This patch includes some refactoring:
- renaming according to Rockbox guidelines
- GPIO code merging, still with target defines
- some simplification in firmware/SOURCES
Change-Id: I7fd95aece53f40efdf8caac22348376615795431
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
In b31c856 startup code section was renamed but boot.lds
linker scripts were not updated accordingly.
Change-Id: I9c9893ec2e199ac2555007a1d23e109ca0daea28
This reclaims ~6kB of ram.
Change-Id: Iafdc661b1cf4445669c08c79205043792b8d14c3
Reviewed-on: http://gerrit.rockbox.org/718
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This should catch the case of buffer misuse which results
in corrupted cookie of next allocation. The check is performed
on move_block() so it may be a bit late.
There is buflib_check_valid() provided which checks the
integrity of all cookies for given context.
On DEBUG build with --sdl-thread this check is carried out
for core_ctx on every context switch to catch problems earlier.
Change-Id: I999d4576084592394e3dbd3bdf0f32935ff5f601
Reviewed-on: http://gerrit.rockbox.org/711
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The only true difference in this platform is the amount of iram
between MCF5249 and MCF5250. Instead of duplicating the file
simply use one with proper ifdefs.
Change-Id: Ifd56ebd2666813633502e3b5d83669424659c039
Reviewed-on: http://gerrit.rockbox.org/713
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This reverts commit 462adf2a0f.
Leaving the card in TRAN results in a huge power consumption because some cards
and internal bridges do not automatically enter power saving mode in TRAN state.
Change-Id: If79efe8cf99b24174889b3a5ebbcb51b07085f58
The ZEN/ZEN-XFi seem to be very picky about the lcd. And they do not like
standby mode so I'm going to drop it, the OF doesn't use it anyway. I still
don't know what this "power" pin is about, obviously it's not real power but
the OF toggle it. Let's hope the lcd will finally become more stable with
fix: the driver now does full power on/off on enable/disable.
Change-Id: I1c465ee4f2462bc3d9507e5f575f0a181af60214
Tested on iPod Mini 1G.
Change-Id: I67ac9b7ed84c34533107136d0aa72e5ce3bcc5bc
Reviewed-on: http://gerrit.rockbox.org/668
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
