Since the libs are now build as universal libs there is no need anymore to
create separate binaries for both architectures and run lipo on them, just
build in a single run now. Fixes building universal binaries and dmg for all
tools using libtools.make.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31590 a1c6a512-1295-4272-9138-f99709370657
It failed to restore macsr to the expected default (FRAC/SAT) which caused DSP
functions like tone control filter calculation to fail (resulting in noise).
The FFT plugin was also affected.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31589 a1c6a512-1295-4272-9138-f99709370657
- As done with libucl and librbspeex, create universal libraries using ar
instead of building twice and using lipo. This notably simplifies things.
- Allow overwriting the compiler via command line. This is required for
building on OS X.
- Update Rockbox Utility to the changed library rules. Fixes building which was
broken by the previous Makefile changes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31588 a1c6a512-1295-4272-9138-f99709370657
- As done with the libucl Makefile replace the universal library handling and
use ar to create a library from fat objects instead.
- Replace OUT with BUILD_DIR to be in line with the other Makefiles. As a
result librbspeex will now be build in a subfolder better named than "build"
when building with Rockbox Utility.
- Make the Makefile depend on the depencency file. This should fix problems
with a broken dependency file not being regenerated properly, causing the
build to fail.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31587 a1c6a512-1295-4272-9138-f99709370657
mkamsboot requires libucl to be linked. Since the introduction of libtools.make
the OS X specific universal library isn't triggered anymore so the libucl built
uses the wrong architecture. Rockbox Utility builds libucl by itself and still
triggers the universal library rule.
Since ar can create fat archives but not operate on them adjust the ar call to
not try to update the archive -- the archive is created anyway, so asking for
an update is not really necessary. Remove any old archive first to make sure
we're not trying to update one, since that would now fail. As a result the OS X
specific hackery to build both ppc and i386 in a single call isn't necessary
anymore.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31585 a1c6a512-1295-4272-9138-f99709370657
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
Reworked version of FS#12402 by Jean-Louis Biasini.
Since the mkimxboot process takes quite a while which blocks the UI it has been
adjusted to perform the actual firmware patching in a separate process. Various
other small changes have been made to make it fit better into Rockbox Utility's
dialogs / messages and update the code to latest changes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31580 a1c6a512-1295-4272-9138-f99709370657
Since flashing the firmware is a rather critical process extend the post
installation hint to advise the user of charging the player first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31579 a1c6a512-1295-4272-9138-f99709370657
use c99 for()
cosmetics
remove the_menu_item struct -> merge with only use
merge variables declaration/assignement
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31575 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Update the target values in the main window immediately on startup. Downloading
the target information might not complete successfully, and in that case a
previously selected target will not be shown. If the target information
download finishes the displayed values are updated again (to show target status
information).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31546 a1c6a512-1295-4272-9138-f99709370657
As a result, the java parts can now be build using ant (in the android dir).
Just issue "ant debug" after "make libs". Building the java parts from eclipse
also still works.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31543 a1c6a512-1295-4272-9138-f99709370657
