This reverts commit 462adf2a0f.
Leaving the card in TRAN results in a huge power consumption because some cards
and internal bridges do not automatically enter power saving mode in TRAN state.
Change-Id: If79efe8cf99b24174889b3a5ebbcb51b07085f58
The code was broken in two ways:
- it called storage_read_sectors with a wrong drive number
- calling storage_read_sectors too early at boot time will fail because
we are in the init function, so the drive is not yet registered.
To fix this, use a user provided read callback instead of storage read
functions.
Change-Id: I5ab79d48391fae619d5f8ae09c3d499fc43854c8
The setting is currently unused but it provides some documentation and basic
support for a more comprehensive implementation of read-only support.
Change-Id: I353c33ef765ef6e6c09d59e943da6654a311ad84
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
This one is a bit strange: our codebase just don't use it if there is both
SD and MMC, so this missing function got unnoticed so far.
Change-Id: Ifea4bb5140477b7637d033737594259cc44fb10e
Now that the drive strength problem has been fixed, we can safely
drive sd cards at 48MHz in HS mode to get the best possible
transfer speed at 3.3V.
Change-Id: I0291589c399fb4880deba97895ff578451a32f99
Instead of going back and forth between TRAN and STBY modes,
stay in TRAN mode all the time, this avoid two commands on each
read/write and a potential delay to wait for the card.
Change-Id: Iafd456ab9a581d870331b622eeb48dcc254eda7f
This allows tells the card the number of blocks that will be
transfered. This is usually faster than continuous read/write.
It is mandatory for MMC and on SD cards, support is probed.
Change-Id: Ide3f97c26c2b714390884c69e05b00c2caa552f8
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
Implement the switch function as specified by the specification,
that is wait for the response AND transfer 64 bytes of data. This
fixes some issue when the SD card take a long time to switch. In
particular waiting 100ms (max per spec) will not work if no data
is transfered in some cases.
Change-Id: Ia22350468018b842e57ce6f6c1a8d676eba97fb8
A number of pins on the imx233 are standard and manually calling
functions to acquire, set function/drive/output is painful. This
will become unmanageable when we will add support for the other
stmp chips.
Introduce the concept of virtual pin which is a way to completely
describe a virtual pin (virtual because pins are muxed).
Change-Id: I01b6e040945648e58e1d1abab06529c9571c5f10
The current pinctrl functions were a mess. Normalise the functions
names to make them shorter and clearer.
Change-Id: Iac6ff84625ef2b7610268e3a5802dc0088de3167
The SD SWITCH command has a result and can take a long time to
finish. Ignoring the answer and waiting an arbitrary time is
unreliable at best.
Change-Id: I1bfbb193952b96598f8bb056bac88220d4edf1fc
The SD driver doesn't initialised drives at the beginning but
upon request to handle removable drives. Since means that the
init should call init_drive() and not init_sd_card() otherwise
the check for WINDOW flag is bypasses. This breaks the zenxfi3
bootloader and has been overlooked for some time.
Change-Id: I7325f7164d16d7e7e54eeb4645e98517a08e0836
Implement cache aligned transfer of more than one sectors. The
current code now transfers almost all data at once by moving
it within the buffer to make it cache aligned. This greatly
improves the performance of the transfers, especially in mass
storage mode.
Change-Id: Ic6e78773302f368426209f6fd6099089ea34cb16
Further merge drivers by using the same command and data functions.
No use one mutex per drive instead of a global sd lock. Fix the
RCA handling which was different between SD and MMC (shifted 16)
and thus confusing. Add MMC commands definition to the mmc.h
header similarly to the SD one. Change MMC handling a bit by
selecting/deselecting on each transfer like SD, which allows
for several MMC devices in theory and is more uniform.
Change-Id: I7024cb19c079553806138ead75b00640f1d2d95c
Merge sd and mmc drivers into a single sdmmc driver. This allows
some factoring of the code and simplify bug fixing. Also fix the
dma/cache related issue by doing all transfers via a correctly
aligned buffer. The current code is not smart enough to take
advantage of large user buffers currently but at least it is safe!
Change-Id: Ib0fd16dc7d52ef7bfe99fd586e03ecf08691edcd
