Jens Arnold
|
8a417edb26
|
Another small optimisation for greyscale blitting on SH1 (making better use of page mode by reordering accesses).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16053 a1c6a512-1295-4272-9138-f99709370657
|
2008-01-11 01:32:19 +00:00 |
|
Jens Arnold
|
6a56c14e17
|
Greyscale library: Changed the internal data format once more (separated pixel values and phases), allowing for further optimisation of drawing, scrolling etc. * Optimised grey phase blitting in the core reduces CPU load on all architectures, most significantly on coldfire. Previous version was too slow to keep up at 45MHz, leading to unwanted graininess (update frequency was halved). Also fixed screendump on 2bpp targets with vertical pixel packing.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16043 a1c6a512-1295-4272-9138-f99709370657
|
2008-01-09 23:48:26 +00:00 |
|
Jens Arnold
|
08e6c6bc2a
|
Greyscale library: Very slight speedup on archos.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16021 a1c6a512-1295-4272-9138-f99709370657
|
2008-01-08 01:09:31 +00:00 |
|
Jens Arnold
|
feb5b15e9b
|
All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15998 a1c6a512-1295-4272-9138-f99709370657
|
2008-01-04 23:42:38 +00:00 |
|
Jens Arnold
|
f4c5c6aa62
|
Fix bootloaders, and the backlight-modded Ondio build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15600 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 19:19:38 +00:00 |
|
Jens Arnold
|
ef12b3b5c6
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 18:49:53 +00:00 |
|
Barry Wardell
|
0d8111cb39
|
Split radio i2c drivers into target tree where they belong. No changes to binaries produced.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-10 19:14:01 +00:00 |
|
Jens Arnold
|
19d141a3eb
|
Fix USB detection on the Player.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14615 a1c6a512-1295-4272-9138-f99709370657
|
2007-09-05 00:24:28 +00:00 |
|
Dave Chapman
|
1672350378
|
FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
|
2007-09-04 08:03:07 +00:00 |
|
Jens Arnold
|
0fac492c3d
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-17 06:45:18 +00:00 |
|
Jens Arnold
|
8a177345ce
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-14 22:06:23 +00:00 |
|
Jens Arnold
|
46b634fd57
|
Fix typo.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13486 a1c6a512-1295-4272-9138-f99709370657
|
2007-05-23 21:40:54 +00:00 |
|
Jens Arnold
|
7a5d4011f5
|
Moved SH1 ADC to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-15 23:35:56 +00:00 |
|
Jens Arnold
|
36ba4b02bd
|
A bit of clarification of code origin. No code change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13173 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-15 22:52:42 +00:00 |
|
Jens Arnold
|
47bf6c5a5a
|
Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13136 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-12 22:12:13 +00:00 |
|
Jens Arnold
|
4c151dcb21
|
Oops, forgot to commit 2 new files...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13115 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-11 23:54:34 +00:00 |
|
Jens Arnold
|
8636e6949e
|
Moved SH1 system code to target tree. * First shot at hwcompat cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13114 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-11 23:51:00 +00:00 |
|
Jens Arnold
|
d6e822cab9
|
Get rid of some old archos debug cruft (USB polarity, PR polarity and ATA address are all derived from the hw mask, and master/slave isn't displayed on other targets either). * Get rid of all the USB*STYLE macros (except USB_IPODSTYLE).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13112 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-11 21:26:58 +00:00 |
|
Jens Arnold
|
fad79dc636
|
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-11 20:44:32 +00:00 |
|
Jens Arnold
|
61350bf91c
|
Remove old reference code, better match Old-LCD init with datasheet, and a bit of optimisation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13013 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-03 21:22:48 +00:00 |
|
Jens Arnold
|
8f872e8ac5
|
Set svn:keywords properly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13009 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-03 19:06:14 +00:00 |
|
Jens Arnold
|
04306321c3
|
Added command macros for old LCD. Renamed some macros to better match the datasheets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13008 a1c6a512-1295-4272-9138-f99709370657
|
2007-04-03 19:04:33 +00:00 |
|
Jens Arnold
|
54ea2e435e
|
Charcell lcd driver: Preparations for switching to non-immediate LCD updates, using lcd_update() like on bitmap targets. * Added proper clipping. * Simplified simulator code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12979 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-31 09:58:49 +00:00 |
|
Jens Arnold
|
ad4e3d6657
|
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12916 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-26 07:52:13 +00:00 |
|
Jens Arnold
|
cb1c9e447e
|
Archos player: Introduce lcd_write_command_e (only one data byte) in the lcd driver, for cleaner C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12835 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-18 17:58:49 +00:00 |
|
Jens Arnold
|
51223e5395
|
Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12419 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-20 19:31:34 +00:00 |
|
Linus Nielsen Feltzing
|
e2022a26d0
|
Removed executable flag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
|
2007-01-09 23:29:07 +00:00 |
|
Jens Arnold
|
5833f05acb
|
Forgot to remove the ata_address_detect() declaration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11813 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-19 09:30:14 +00:00 |
|
Jens Arnold
|
28fd4b7228
|
Archos: Moved the ata_address_detect() code into ata_device_init(), removing the associated #ifdef and some public #defines. Saves a tiny bit of code as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11812 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-19 09:27:41 +00:00 |
|
Jens Arnold
|
31ffd7b154
|
Completed target tree move of the ata driver code. Some code cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-03 22:13:44 +00:00 |
|
Jens Arnold
|
0e6dd7efcd
|
Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-27 02:16:32 +00:00 |
|
Jens Arnold
|
6bdf3ee6f2
|
Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-12 13:22:59 +00:00 |
|
Jens Arnold
|
ad70a9b2e6
|
Moved archos LCD aseembler code to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-09 07:31:31 +00:00 |
|
Daniel Ankers
|
41997d3d89
|
Clean up crt0.S and move it to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10830 a1c6a512-1295-4272-9138-f99709370657
|
2006-08-31 19:45:05 +00:00 |
|
Linus Nielsen Feltzing
|
5a0cb68e43
|
Moved some assembly optimizations to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10318 a1c6a512-1295-4272-9138-f99709370657
|
2006-07-25 11:16:03 +00:00 |
|