Commit graph

9 commits

Author SHA1 Message Date
Michael Sevakis
4d04132c76 PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25970 a1c6a512-1295-4272-9138-f99709370657
2010-05-12 14:05:36 +00:00
Michael Sevakis
931e06de64 i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25800 a1c6a512-1295-4272-9138-f99709370657
2010-05-04 10:07:53 +00:00
Michael Sevakis
11cca264ff i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25699 a1c6a512-1295-4272-9138-f99709370657
2010-04-23 15:32:50 +00:00
Torne Wuff
d48d3d467d Enable SW tone control on gigabeat S, since HW tone controls for its DAC are not implemented yet
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25641 a1c6a512-1295-4272-9138-f99709370657
2010-04-13 21:47:09 +00:00
Torne Wuff
bad4142ce2 Add LBA48 support to all targets with ATA, except archoses whose USB bridge chip can't handle it.
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 12:10:17 +00:00
Michael Sevakis
86545174b9 Gigabeat S: A little more housekeeping. Move source clock frequencies to config. header and name them per ref. manual designations.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25549 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 03:24:17 +00:00
Jeffrey Goode
ce6ec7fef8 Switch on hotkey on several targets. Stole the WPS Show Track Info key for most of them. Made up a free key for the rest.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25433 a1c6a512-1295-4272-9138-f99709370657
2010-04-02 01:24:24 +00:00
Jeffrey Goode
d5e6bc7a8c FS#11081 - Hotkey patch. Many targets supported, but some keymaps need work before they can be switched on
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25414 a1c6a512-1295-4272-9138-f99709370657
2010-04-01 03:14:44 +00:00
Björn Stenberg
c0740440ac Rename targets to be consistent in all places. (FS #10819). Take 2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657
2009-12-07 12:19:08 +00:00
Renamed from firmware/export/config-gigabeat-s.h (Browse further)