Exclude compilation of firmware/debug.c for hosted platforms.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28125 a1c6a512-1295-4272-9138-f99709370657
This is related to gdb, and gdb can only work on SH and ifp
This was mistakenly kept when app.lds was forked for each SoC
Side-effect: fix DEBUG builds when the rockbox binary is expected to
be loaded at the start of DRAM and there is no runtime relocation
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28124 a1c6a512-1295-4272-9138-f99709370657
For this it needs to look at the plugin header. Since lc_open() doesn't know
it's a plugin, the header needs to be changed slightly to include the new lc_header (which needs to be the first element in plugin_header so it can be casted savely).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28054 a1c6a512-1295-4272-9138-f99709370657
The old cache coherency function names where wrong and misleading.
The new names are (purposely different from vendor manuals)
* commit_* (write-back only)
* discard_* (removing lines from cache only)
* commit_discard_* (write-back and removing lines from cache)
It's suspected the old names have led to wrong uses. The old names still exist
(as aliases) so every call via the old names need to be double checked and changed
to the new name.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28045 a1c6a512-1295-4272-9138-f99709370657
IN & OUT interrupts have not much in common so move each to its own
function
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28043 a1c6a512-1295-4272-9138-f99709370657
- reorder members (largest members first)
- int status -> int8_t status (we only use 0 or -1)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28042 a1c6a512-1295-4272-9138-f99709370657
- use a single table to store endpoints numbers (1 table by direction)
- drop __ prefix since the table isn't meant to be hidden (it is used in
reset_endpoints()
- the tables won't change at runtime: mark const
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28038 a1c6a512-1295-4272-9138-f99709370657
set status to failure before signaling usb_drv_send_nonblocking() in
reset_endpoints()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28037 a1c6a512-1295-4272-9138-f99709370657
Use ep0_setup_pkt as a pointer
Fix comment for CGU_USB clk source
Remove comment about physical address, the macro handles that for us
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28035 a1c6a512-1295-4272-9138-f99709370657
Since we'll receive data from DMA in this buffer we don't need to write-back
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28032 a1c6a512-1295-4272-9138-f99709370657
- don't use *_dcache_range() on uncached memory
- remove unused struct endpoint->buffer
- use correct *_dcache_range() in usb_drv_transfer() for each direction
- halve FIFO size
sometimes mounts / sometimes fails
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28031 a1c6a512-1295-4272-9138-f99709370657
- implement request_endpoint
- setup nextep chain for in endpoints
- remove useless dcache operation on IN transfer completion
- fix transfers to use correct max packet size
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28028 a1c6a512-1295-4272-9138-f99709370657
- use uncached address to access setup packet
- implement driver exit
- stop forcing full speed
- change fifo sizes on init
- don't call invalid_dache() on setup packet because it makes everything fail
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28027 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Seperate make rules in a almost empty android.make.
Also add forgotten powermgmt-android.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27977 a1c6a512-1295-4272-9138-f99709370657
Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
