Commit graph

101 commits

Author SHA1 Message Date
Michael Sevakis
41b235dacf Fix red. No bother with lcd power management calls in bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17508 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 20:26:20 +00:00
Michael Sevakis
af395f4db6 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 01:50:41 +00:00
Jens Arnold
68a21689ae Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16775 a1c6a512-1295-4272-9138-f99709370657
2008-03-24 00:35:53 +00:00
Jens Arnold
ed3ff1b0b5 Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
2008-03-17 23:47:38 +00:00
Jens Arnold
f4c5c6aa62 Fix bootloaders, and the backlight-modded Ondio build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15600 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 19:19:38 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 18:49:53 +00:00
Barry Wardell
0d8111cb39 Split radio i2c drivers into target tree where they belong. No changes to binaries produced.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
Jens Arnold
99f9550881 H300, X5: Optimised lcd_yuv_blit(), using line-pair zig-zag writing to the LCD controller. ~7% speedup on H300, ~5% speedup on X5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15111 a1c6a512-1295-4272-9138-f99709370657
2007-10-14 23:05:56 +00:00
Jens Arnold
8a177345ce Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
Nils Wallménius
f28da1a35a Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
2007-08-12 19:49:03 +00:00
Michael Sevakis
60b01fa0f7 Straignten out some issues with HAVE_LCD_ENABLE. 1g/2g/3g had it defined but it shouldn't have been. lcd_enabled() was only available as a real function on gigabeat but others can use that too. Markup lcd.h a bit because I got a bit lost in it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14100 a1c6a512-1295-4272-9138-f99709370657
2007-07-31 12:43:06 +00:00
Michael Sevakis
7d759f6b9c Do some planned radio interface cleanup since adding in the LV24020LP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
Michael Sevakis
2d48d0ffa6 Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13599 a1c6a512-1295-4272-9138-f99709370657
2007-06-08 23:42:04 +00:00
Jens Arnold
47bf6c5a5a Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13136 a1c6a512-1295-4272-9138-f99709370657
2007-04-12 22:12:13 +00:00
Michael Sevakis
3354531614 More logf fixes. speex.c wants to format 64bit args so I didn't change that one nor add any formatting for that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12858 a1c6a512-1295-4272-9138-f99709370657
2007-03-20 13:53:23 +00:00
Michael Sevakis
e21d217205 Squeeze the serial number code down a few more bytes and call it a day. Will try to reduce by a significant amount later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12726 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 16:01:01 +00:00
Michael Sevakis
94c4724420 Fix a late error that only let it read at default CPU frequency. Disable interrupts during ds2411 read since it's timing sensitive.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12724 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 14:33:16 +00:00
Michael Sevakis
89a38d4273 iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 13:59:31 +00:00
Michael Sevakis
633f388002 Coldfire targets: Shuffle IRQ levels around to have all interaction between low level audio function calls and DMA be atomic. Make recording and playback independently startable and stoppable so one can be running and not interfere with the other. All tests I can do at the moment check out ok (play, record, play+record, FM radio on iRivers, S/PDIF on H120 (w/running optical on/off), and on-the-fly samplerate changes). Recording tested for well over an hour run and no problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12658 a1c6a512-1295-4272-9138-f99709370657
2007-03-07 06:23:02 +00:00
Jens Arnold
611737bde8 Add extra filtering to the X5 and M5 button drivers to prevent erratic button events (ported from H300).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12627 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 20:14:41 +00:00
Michael Sevakis
8867d00141 More catching up on old work. Refine audio interface setup on Coldfire. Stop the funky glitching on the iAudio stuff when starting recording esp. at 88.2kHz. (probably due to the bidi interface). iRivers don't seem to care what you do. TLV320 still seems to have a little trouble selecting it's filters correctly for 88.2kHz or it could be some odd phasing effect. Get rid of the horrible reset parameter in pcm_apply_settings as it can decide for itself.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12618 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 08:14:27 +00:00
Jens Arnold
1d232401fd Forget to commit this one deleted file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12611 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:13:46 +00:00
Jens Arnold
8876018d25 Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
Jens Arnold
7d718a8064 X5: Move the remote tick to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12486 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:36:04 +00:00
Jens Arnold
51223e5395 Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12419 a1c6a512-1295-4272-9138-f99709370657
2007-02-20 19:31:34 +00:00
Miika Pekkarinen
73cd9f3b63 Turn backlight ON at boot unless bootloader has already done that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11992 a1c6a512-1295-4272-9138-f99709370657
2007-01-12 20:26:23 +00:00
Linus Nielsen Feltzing
e2022a26d0 Removed executable flag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
2007-01-09 23:29:07 +00:00
Michael Sevakis
36c940555c SWCODEC recording: More cleanup of stuff after queue additions and audio driver unification.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11783 a1c6a512-1295-4272-9138-f99709370657
2006-12-17 11:03:19 +00:00
Marcoen Hirschberg
77d039bab8 first step in audio driver unification: renaming the functions to audio_*
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11670 a1c6a512-1295-4272-9138-f99709370657
2006-12-06 10:24:59 +00:00
Jens Arnold
6adbbc0f2f X5: Slightly lower threshold value to reliably disable constant adc reading when no button is pressed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11604 a1c6a512-1295-4272-9138-f99709370657
2006-11-26 18:24:23 +00:00
Michael Sevakis
f27c266097 Just correct a comment and see if the build goes differently.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11578 a1c6a512-1295-4272-9138-f99709370657
2006-11-23 19:46:24 +00:00
Michael Sevakis
ab1861a3c2 iRiver/iAudio: Added audio_set_recording gain and sound_default to plugin API. Simplified plugin recording by target/-ing some audio functions. UDA1380 records with WSPLL as a result.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11577 a1c6a512-1295-4272-9138-f99709370657
2006-11-23 19:21:15 +00:00
Michael Sevakis
58825f6e73 Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11502 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 18:47:41 +00:00
Michael Sevakis
cf59a4fc1d H300/X5: Moved backlight brightness code to target tree. Created __backlight_set_brightness in backlight-(target).c. backlight_set_brightness range clamps and calls the backlight driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11488 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 01:25:52 +00:00
Michael Sevakis
0f5cb94aa4 Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 18:07:30 +00:00
Jens Arnold
f8b1da2f7b H300, X5: Faster lcd_yuv_blit() using EMAC. Speedup of the function itself at 124MHz: 10.5% on X5, 16.5% on H300. mpegplayer speedup 3..4%
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11429 a1c6a512-1295-4272-9138-f99709370657
2006-11-04 00:42:18 +00:00
Jens Arnold
84074cd292 Removed remnants of deprecated lcd_roll().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11409 a1c6a512-1295-4272-9138-f99709370657
2006-10-31 19:49:35 +00:00
Michael Sevakis
9e8fe0e4c6 General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11396 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 11:33:38 +00:00
Marcoen Hirschberg
ede3d646b9 move coldfire ata defines to a shared ata-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11395 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 09:38:34 +00:00
Michael Sevakis
c4a0d45d36 Cleanup of new button reading code. Moved functions for enabling of scanning and the decision to scan or not to button_read_device.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11377 a1c6a512-1295-4272-9138-f99709370657
2006-10-28 23:10:45 +00:00
Michael Sevakis
2ede2a79e6 Put a couple x5-specific function declarations in adc-target.h where they should be.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11358 a1c6a512-1295-4272-9138-f99709370657
2006-10-27 08:12:18 +00:00
Michael Sevakis
1d4a9c6366 Stop reading buttons if one is not down. Don't read remote keys if not plugged. Good for another few points of boost and 4fps full-screen unboosted. The button scan enabling seems stable and I've been using it without any difficulties but if the interrupts hiccup it could leave them unresponsive. Clearing the GPI0 interrupts before enabling them seems to prevent any difficulties. If there's problems there I'll just leave the remote reading bypass only and 50% of the benefits will still be realized.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11357 a1c6a512-1295-4272-9138-f99709370657
2006-10-27 05:31:28 +00:00
Michael Sevakis
784dd78745 Moved pcf50606 stuff to target directory.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11348 a1c6a512-1295-4272-9138-f99709370657
2006-10-25 23:24:07 +00:00
Michael Sevakis
34751f096c Fixed implicit declaration warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11332 a1c6a512-1295-4272-9138-f99709370657
2006-10-25 06:27:40 +00:00
Michael Sevakis
b26e396436 Pinched pcf50606 i2c code used in iRiver players and adapted to x5. Boost ratios down as much as 100 percent for mp3 and 50 percent for vorbis. mp3 hardly ever boosts even with eq. Scrolling much sharper. Like a whole new player. The code can be used for both iRiver and x5 by just defining macros with the appropriate ports and bit numbers for each player. Probably will have a pcf50606-coldfire.c soon.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11330 a1c6a512-1295-4272-9138-f99709370657
2006-10-25 06:10:22 +00:00
Michael Sevakis
10363b3a81 Get rid of some OR-ing and conditional expressions in lcd driver when register values can just be saved in shorts. Touch-up to comment in asm part.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11281 a1c6a512-1295-4272-9138-f99709370657
2006-10-20 23:57:48 +00:00
Linus Nielsen Feltzing
d543bd486b iAudio X5: USB mode working again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11261 a1c6a512-1295-4272-9138-f99709370657
2006-10-18 20:56:29 +00:00
Michael Sevakis
1102afb0b0 Disables hard dither mode on the x5 for routine drawing. Display driver automatically enables it when needed. Full screen frame rate up to 48 at normal CPU frequency from about 45 putting it about where it was when everything including the framebuffer was in IRAM due to the shorter and simpler lcd_write_data. Please advise if this works differently on any x5 as this might be considered a hack since nothing in the datasheet specifies using the chip this way. It is perfectly functional on mine.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11233 a1c6a512-1295-4272-9138-f99709370657
2006-10-16 02:24:06 +00:00
Michael Sevakis
f80de70df3 x5: Needed a couple tweaks to the contrast fix.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11077 a1c6a512-1295-4272-9138-f99709370657
2006-09-27 01:13:41 +00:00
Michael Sevakis
b8043fcbf9 Remote play button was still being read out with remote hold key on.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11076 a1c6a512-1295-4272-9138-f99709370657
2006-09-26 23:35:44 +00:00