This test software setups timer T0 periodic interrupt.
In ISR it changes backlight level. The interrupt handler
does not support nesting and the whole ISR is run in interrupt
context. Exceptions are not handled yet.
Change-Id: Idc5d622991c7257b4577448d8be08ddd1c24c745
Windows will try to retrieve such a descriptor on first connect.
If the device returns STALL or a regular string descriptor (i.e.
not one that follows the Microsoft OS Descriptor spec), things
will continue normally.
Unfortunately some of our low-level USB drivers have issues with
STALL so any other valid descriptor is the next best solution.
Change-Id: I59eb09eea157e4e14bec0197a898be378a5559f2
Reviewed-on: http://gerrit.rockbox.org/680
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Tested: Frank Gevaerts <frank@gevaerts.be>
This patch includes some refactoring:
- renaming according to Rockbox guidelines
- GPIO code merging, still with target defines
- some simplification in firmware/SOURCES
Change-Id: I7fd95aece53f40efdf8caac22348376615795431
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
The getty service mointors /dev/ttyGS0 (also created by the patched firmware).
When the g_serial.ko module is loaded this automatically enables shell access
via usb. It exposes a cdc-acm device to the host which is compatible to linux
(usb_serial.ko) and windows.
The g_serial.ko is not included module can be build from the YP-R0 open source
package provided by samsung. It can be loaded via rc.user on the internal memory.
Change-Id: I4903a635fd2e2f0ce6f5e91589a31d72bba2776b
Even though the DMA buffer itself does not move the ISR copies from a movable
buffer into the static commit buffer. To ensure this copying yields consistent
data it must not be interrupted by this ISR..
Also bump the commit buffer size to 2k, this should reduce the overhead
considerably because many clips are smaller than that (especially on
swcodec/speex).
Change-Id: I4e1ab83074f31fc91b51a58baa1df55ce659ac73
The voice engine can now request more voice data during decoding, it does
not require the entire clip to be available before start of decoding anymore.
Therefore the commit buffer does not need to hold an entire voice clip anymore,
and can be made greatly smaller.
Change-Id: I3eca9026448e725b9b8d0dae1efca0ad185371da
This unifies the talk.c for all possible voice payload. .talk clips are placed
onto the same unified clip cache, along with normal clips. This allows for more
effecient memory usage.
The cache handling makes a slight difference between normal clips and .talk
ones: .talk clips can be cached multiple and are always freed first.The extra
logic to avoid loading multiple copies of .talks is not necessary because the
will be freed first anyway.
Change-Id: I88d056a0a613b129f5875f50fdb757b58bac0a42
This unifies the talk.c for all targets. The only separation is left is
TALK_PROGRESSIVE_LOAD: When this is defined the talk buffer will not be
initially prefilled. This is useful for super slow storage or when the buffer
is not large enough to prefill it with useful clips (the prefill code could
be made smarter too).
The buffer size can be adjusted. By default lowmem uses 100k while
other targets load the entire file. The bigger the more clips can be cached
but with diminishing returns.
Change-Id: Ife38fb101c53093117e6638c40c65f7d177a31d4
Previously the clip cache of TALK_PARTIAL_LOAD reserved space N clips, each slot
was as big as the maximum sized clip which was necessary to replace clips
in-memory in MRU-style.
The cache management now uses buflib to allocate and free each clip, using the
clip's real size. This allows the clip cache to be much more compact, because
no space is wasted for the max. sized clip. This makes use of buflib's ability
to easily manage differently-sized memory chunks by moving them to make free
space.
As an example: for english.voice TALK_PARTIAL_LOAD allocated 288k in advance.
for just 64 clips. With this patch ~70 clips can be stored in a 100k buffer.
This, the memory usage is cut by 2/3 and almost optimal (there's still the
buflib per-alloc cookie overhead).
As a result the TALK_PARTIAL_LOAD buffer is restricted to 100k which still
allows for more clips than previously, on average.
Change-Id: I257654071e9a95770cd6db2c2765f020befce412
This is necessary because when voice is active audio is disabled. But only
audio was able to shrink it's buffer to let other memory allocs succeed.
talk needs to be able to do this too when it owns the audio buffer exclusively.
Change-Id: Idea8ab90da7169f977c0c766cccb42c4fe6d6e81
talk_init() is called by settings_apply() already which is called on boot.
Doing it again means loading the voicefile a second time which isn't necessary.
Change-Id: I4decd16401e63bf87338d3163c99d06d69fe3a3c
This allows buflib clients to more accurately estimate the total memory usage.
It's still not 100% accurate because the handle table grows in blocks, thus
buflib might use more memory that caused by allocations directly.
Change-Id: I68338bb94f510ad188fcb588aebf895b5f9197c5
These 256K are intended to account for the binary size which reduces the total
available RAM on native targets. 256K is really outdated though, 768K should be
more accurate (for the majority of targets).
Change-Id: Iab3ee51d42ae15b1b7efb8588881579cf1948ae7
63cfbe0 fixed the number of codepages for bitmap targets. The same issue is
present on charcell, so update the number for that as well, fixing UTF-8
missing in the list.
Change-Id: Ib5d3494ed3d80e839ae3f59ec0a4277e5aa9d6fd
When the policy is not set, it'll by default not give the clip buffer away.
Callers of core_alloc_maximum() suffer from this. However, the thumbnail
buffer can be easily freed when needed because nothing needs to be
reloaded from disk when it is reallocated (thumbnail clips are loaded on
demand, when in the file browser). Do this to give core_alloc_maximum() callers
a better chance to succeed with the default talk buffer policy.
Change-Id: I8c0da29c520612ca903f6c930bd7c74ae97eca3b
In most of the translations strings with SYSFONT in title is
translated. This leads to displaying problem in (at least) graphical
equalizer due to the lack of non-latin character support in the
built-in font.
Change-Id: I0d27a5358e4eb539d4247c84975d8501d7668836
Reviewed-on: http://gerrit.rockbox.org/727
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
I've found this algorithm produces clearer results when rendering
some fonts at small point sizes.
Change-Id: If87d82731ad324405195b25baad78fe54e92c142
Reviewed-on: http://gerrit.rockbox.org/412
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The builtin sysfont does not have an associated buflib_alloc_data
(because it's builtin right?). font_get_{width,bits} accessed a field of
it for all fonts which crashed on some systems but not on mine.
Solution: Move this field to struct font directly.
The cache size calculated was also busted.
Fixes FS#12944 and most likely FS#12938.
Change-Id: I32303c4335a12a6c421fdca34f7ece851aac12ca
The "Save Current Playlist" isnt part of the playlist viewer settings. While
at this section also add a reference to the extra playlist chapter.
Change-Id: I68e494430dc00c6172859b0b8d9edbe5b0116741
When skins use the default backdrop (via %X(-) or no %X at all) and the setting
changes it needs to be reloaded, otherwise when changing themes the new theme
could show the backdrop from the previous theme. The same needs to be
done when re-selecting the same theme after USB because the backdrop file was
potentially overwritten.
Fixes FS#12892 and FS#12942.
Change-Id: Ic2d20740cc385fa99667ce8a71507dbda2efceaf
Several devices, including the Fuze+ have great trouble recovering from
very low battery states, even in the presence of USB power. This is partly
due to buggy Sigmatel boot stubs and Rockbox bootloader doing unsafe power
operations on boot (should be fixed soon). In such a state, it is impossible
to boot either the OF and Rockbox, so only the recovery mode is available.
With this commit, mkimxboot can now create a very small stub which only
does one thing but does it well: setup charging to recover from any situation.
It does not provide a fancy charging screen or whatever, screen will just
stay black and the device will slowly charge at ~100mA. When the battery is
back to a normal level, just unplug and boot normally.
Change-Id: Ib50880af85ed1f4f64a7eed0f2221e73c889c351
