The GPIO APIs for ypr0 and ypr1 targets was messy, requiring a
direct communication via several ioctls calls.
Since it is planned to add support to other devices, more GPIO are
going to be used. For that reason the functions shall be clear and
easy to use.
Change-Id: Ia2304335e1fed1305cc2c4320bd4c097e13079be
Some people reported strange charging times and
strange battery life.
Charging by OF: 25 hours; RB: 18 hours
It has been found that there are at least two issues here:
1) the way of getting battery charging status wasn't
really accurate. This attempts to fix that issue.
This patch also simplifies some code (opening a
device is no more needed, for example).
To technically explain, battery charging implies first a constant
current mode (where the voltage increases) and then a constant
voltage mode (where, obviously, the voltage reads more or less
the same). The old way the End Of Charge was detected was based solely
on the voltage, while now it is based on chip's EOC interrupt,
which should be more accurate.
2) OF explicitly sets a constant current 350 mA, while we usually had
55 mA (by as3543 default).
This wasn't discovered before since there is a caching problem
("an accurate guess") in the Samsung power mgmt Linux module,
thus its debugging dumper wasn't really working, reporting a 55 mA current.
Strangely this option should have been set by the bootloader
but apparently it does not.
Some testing is still needed, but I confirm that with this patch
I could run a benchmark for 25 hours (vs. 18 hours), by charging
within Rockbox of course.
Change-Id: I3bd921e86b9018d1cc3c720d15cc46896e8490b3
A thread polls the appropriate GPIO pin for sd card presence and mounts
using the mount system call.
Change-Id: I31ab41c4120f4af64eb6998b7e7b6f9051585efb
Part of this change is to align sdlapp builds to other application targets
in that the sim_* wrappers are not used anymore (except for sim_read/write).
Path mangling is now done in rbpaths.c as well.
Change-Id: I9726da73b50a83d9e1a1840288de16ec01ea029d
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).
SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).
Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
This patch includes some refactoring:
- renaming according to Rockbox guidelines
- GPIO code merging, still with target defines
- some simplification in firmware/SOURCES
Change-Id: I7fd95aece53f40efdf8caac22348376615795431
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The GPIO device file wasn't closed due to this. This wasn't a big deal
because the device powers off shorty afterwards anyway.
Change-Id: I9a6b4d57d32627157323b4883e47b8812f5dcb4d
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
