Commit graph

449 commits

Author SHA1 Message Date
Michael Sevakis
480c663e5b i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29122 a1c6a512-1295-4272-9138-f99709370657
2011-01-23 20:21:35 +00:00
Michael Sevakis
863c03f2ae Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29099 a1c6a512-1295-4272-9138-f99709370657
2011-01-21 07:05:51 +00:00
Michael Sevakis
453550a687 Try to get some control over #ifdef hell in usb.c by refactoring and inline function use. SYS_USB_DISCONNECTED_ACK hasn't been doing anything useful for the USB thread; remove it. USB thread simply ignores that value. Observe only valid usb_state transitions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29084 a1c6a512-1295-4272-9138-f99709370657
2011-01-18 14:10:06 +00:00
Michael Sevakis
5bf25bbd4f Fix typo on macro made during previous PPBL commits.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29061 a1c6a512-1295-4272-9138-f99709370657
2011-01-16 00:35:22 +00:00
Michael Sevakis
d0178ba01c Display messages only when entering USB mode in Portal Player bootloader to keep timed-out charger-only connects going into verbose mode.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29060 a1c6a512-1295-4272-9138-f99709370657
2011-01-16 00:21:54 +00:00
Michael Sevakis
7b7cfc31c5 Fix r29054 red...yeah?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29055 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 09:01:55 +00:00
Michael Sevakis
71651cacb6 Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29054 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 08:52:59 +00:00
Michael Sevakis
3a1127785b Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29053 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 08:19:30 +00:00
Michael Sevakis
0afad89f53 SA9200 boot: Add OF.ebn to the list of OF filenames to check.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29014 a1c6a512-1295-4272-9138-f99709370657
2011-01-09 19:31:41 +00:00
Michael Sevakis
89a7a8138e Gigabeat S: Make it a removable mass-storage device. Windows will assign a drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28972 a1c6a512-1295-4272-9138-f99709370657
2011-01-05 19:35:51 +00:00
Marcin Bukat
67feb81084 MPIO bootloader - turn off backlight when hold is on. Usefull feature when charging during night.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28958 a1c6a512-1295-4272-9138-f99709370657
2011-01-03 13:11:48 +00:00
Marcin Bukat
0358e7b864 MPIO HD200, HD300: Make USB bridge handling more correct (this doesn't solve problems with USB inside rockbox on HD300 unfortunately).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28780 a1c6a512-1295-4272-9138-f99709370657
2010-12-09 11:31:08 +00:00
Marcin Bukat
a73102f2c2 HD300: Fix bootloader hang when RTC alarm fires. Make entering bootmenu more reliable. Add some comments.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28739 a1c6a512-1295-4272-9138-f99709370657
2010-12-06 10:24:29 +00:00
Marcin Bukat
15a0a3c263 Rename bootloader file for MPIO players as it supports both HD200 and HD300.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28700 a1c6a512-1295-4272-9138-f99709370657
2010-11-28 23:10:09 +00:00
Marcin Bukat
9a24892e2e MPIO HD300 - initial commit
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28680 a1c6a512-1295-4272-9138-f99709370657
2010-11-26 23:28:08 +00:00
Marcin Bukat
650a2941fd MPIO HD200: fix red (I missed bootloader and simulator when renaming buttons)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28444 a1c6a512-1295-4272-9138-f99709370657
2010-11-02 10:51:04 +00:00
Marcin Bukat
082c7d3c6b Set svn properties
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28326 a1c6a512-1295-4272-9138-f99709370657
2010-10-22 12:28:43 +00:00
Marcin Bukat
38edf679f2 MPIO HD200 - squash long standing bug in bootloader which prevented booting OF if doing coldstart on battery only.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28324 a1c6a512-1295-4272-9138-f99709370657
2010-10-22 12:11:58 +00:00
Michael Sparmann
c599da333e Commit FS#11663 by me - Patch: iPod Nano 2G Bootloader: Boot OF if MENU button is held
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28237 a1c6a512-1295-4272-9138-f99709370657
2010-10-10 20:52:46 +00:00
Thomas Martitz
0e2286f226 Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27788 a1c6a512-1295-4272-9138-f99709370657
2010-08-12 13:38:25 +00:00
Thomas Martitz
240923a801 Rockbox as an application: Commit current Android port progress.
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
 - Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
 - no cabbiev2 (only some preliminary files for it), no other default theme.
 - screen flickers sometimes if the updates are too frequent
 - no multi screen apk/package
 - strange behavior when a phone call comes in

The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
2010-08-02 20:34:47 +00:00
Marcin Bukat
a6478fda4f fix yellow
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27356 a1c6a512-1295-4272-9138-f99709370657
2010-07-09 09:18:40 +00:00
Marcin Bukat
78d54fae75 HD200 - Add delay when leaving bootloader USB mode. Add more comments in bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27355 a1c6a512-1295-4272-9138-f99709370657
2010-07-09 09:12:51 +00:00
Marcin Bukat
57484bdf04 HD200 - add support for remote in bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27316 a1c6a512-1295-4272-9138-f99709370657
2010-07-06 17:30:10 +00:00
Frank Gevaerts
b8286d45be Move -Wl,-z,defs to GLOBAL_LDOPTS (instead of GCCOPTS), to avoid noise in older gcc output when not linking
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27260 a1c6a512-1295-4272-9138-f99709370657
2010-07-03 20:58:22 +00:00
Rafaël Carré
64d3a22ec0 sansa AMS bootloader: build if USE_ROCKBOX_USB isn't defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27076 a1c6a512-1295-4272-9138-f99709370657
2010-06-23 05:16:24 +00:00
Rafaël Carré
1ec821244a Sansa AMS bootloader: enter USB mode only when needed
- If an error happens when reading partitions / rockbox.sansa
- If the select button was pressed

add an argument to error() to not power off, when we're going to enter
USB mode to try to fix the problem, but display the error message anyway
for debugging purpose

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27075 a1c6a512-1295-4272-9138-f99709370657
2010-06-23 05:08:36 +00:00
Rafaël Carré
fd715fa95c as3525*: enable MMU in bootloader
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 17:33:51 +00:00
Rafaël Carré
f9b0f81d63 Sansa AMS: fix bootloader USB mode
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26914 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 13:30:25 +00:00
Rafaël Carré
b812465bff as3525: bootloader USB mode
not working yet : an empty drive is detected
won't link on fuzev1: drivers allocated in usb_storage.c are too large

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26905 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 01:47:39 +00:00
Marcin Bukat
cd87971bad HD200 - use ide_power_enable() in bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26844 a1c6a512-1295-4272-9138-f99709370657
2010-06-14 10:42:45 +00:00
Bertrik Sikken
a5248a2995 Update Samsung YP-S3 bootloader demo
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26417 a1c6a512-1295-4272-9138-f99709370657
2010-05-30 21:43:14 +00:00
Rafaël Carré
5d236b2bfd Generate C file / header for svn version string
It's now easier to force rebuild of files depending on the svn revision

version.c/version.h are generated once with new tools/genversion.sh
Changes in the VCS are still not auto detected, so you'll have to remove
builddir/version.* if you want to change the string in your binaries

APPSVERSION is now called RBVERSION and is defined in the generated
header instead of being defined by the Makefiles
appsversion is now called rbversion (the plugin api number didn't change
since old modules are still binary compatible)

Change some bootloaders to use knwon-at-buildtime RBVERSION instead of
"%s" + rbversion

You'll need to run make clean to regenerate dependencies after the
removal of apps/version.h

To build binaries with a different version string, hand-edit
tools/version.sh or tools/genversion.sh (which calls the former)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26320 a1c6a512-1295-4272-9138-f99709370657
2010-05-27 09:41:46 +00:00
Frank Gevaerts
ab4a162763 Fix gigabeat S includes so it builds again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25855 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 22:13:54 +00:00
Thomas Martitz
77dfff5a55 Fix some more snprintf related warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25853 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 21:37:03 +00:00
Thomas Martitz
0a1d7c28b7 Make open() posix compliant api-wise. A few calls (those with O_CREAT) need the additional optional mode parameter so add it. Impact for the core is almost zero, as open() is a wrapper macro for the real open function which doesn't take the variable parameter.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25844 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 17:35:13 +00:00
Thomas Martitz
c61e89c0ed Make creat() posix compliant API-wise. Shouldn't affect the core as it's wrapped via a static inline.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25843 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 17:35:04 +00:00
Michael Sevakis
0defb8483c Gigabeat S bootloader: Fix archaic call placement in dptc_stop which hangs the bootloader before jumping to FW. Let the backlight LED ramp up after unplugging USB which just looks better.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25840 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 04:45:05 +00:00
Marcin Bukat
69fa42d905 HD200 - rework bootloader logic
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25806 a1c6a512-1295-4272-9138-f99709370657
2010-05-04 11:16:17 +00:00
Marcin Bukat
28d54c6016 Add MPIO HD200 port - new files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25725 a1c6a512-1295-4272-9138-f99709370657
2010-04-26 21:40:16 +00:00
Marcin Bukat
b09d3aec39 Add MPIO HD200 port - changed files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25724 a1c6a512-1295-4272-9138-f99709370657
2010-04-26 21:40:00 +00:00
Torne Wuff
0d24df8b95 FS#11199: ipod bootloader: reboot to disk mode on cable insert, following a fatal error
If the ipod bootloader dies with a fatal error it prompts you to press buttons to reset and enter disk mode. With this change it now also polls for USB/firewire insertion and if the cable is detected, it reboots to disk mode directly for you, avoiding user problems with rebooting correctly by hand.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25643 a1c6a512-1295-4272-9138-f99709370657
2010-04-13 22:17:42 +00:00
Michael Sevakis
011b0fa66a Gigabeat S: Fix bootloader red from r25547 commit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25548 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 01:28:19 +00:00
Frank Gevaerts
2dbafc1086 Fix some forgotten storage_(read|write)_sectors() calls
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25461 a1c6a512-1295-4272-9138-f99709370657
2010-04-03 22:18:16 +00:00
Rafaël Carré
dee432fd95 as3525v2: silence bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25369 a1c6a512-1295-4272-9138-f99709370657
2010-03-28 04:10:40 +00:00
Szymon Dziok
492fafe879 Packard Bell Vibe 500: remove the old bootloader code (actually a lack of code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25311 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 21:28:25 +00:00
Rafaël Carré
97c1497b8d Clip+ : make the bootloader not verbose by default
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25201 a1c6a512-1295-4272-9138-f99709370657
2010-03-15 11:47:50 +00:00
Michael Sparmann
e5c815272d Add more information to the battery debug screen for Nano2G
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24723 a1c6a512-1295-4272-9138-f99709370657
2010-02-17 15:57:53 +00:00
Andree Buschmann
dfe46436b1 Remove tabs
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24547 a1c6a512-1295-4272-9138-f99709370657
2010-02-07 17:50:24 +00:00
Rafaël Carré
12af2926e5 Make Clip+ bootloader build
Now making the Fuzev2 bootloader build should be pretty easy

TODO:
    - write button driver (FlynDice found all buttons already)
    - find button light
    - decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
    - check if backlight code works (I copied Clipv2 code)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
2010-02-05 12:40:25 +00:00