- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.
It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.
lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.
All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).
Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
This patch adds a configurable line separator between list items, very
similar to lists in Android. Additionally, below the list item there is a
thicker line. It can be disabled in the settings. Its color can
be configured as well.
Remote and monochrome displays are explicitly unsupported. If there is desire
this can be changed but it doesn't seem useful to me.
Change-Id: I005313b0d8f5ecd15864bf20e66ea4e3390d8b7d
The setting strings are now of the form setting[.resolution[&feature]]
(resolution can be a regex, .+ to match all resultions). wpsbuild.pl will
check against features.txt to see if the target meets it.
This can be used, for example, to add/override default settings for
touchscreen devices.
Change-Id: I2eafa02f10b362a8e7de8e1f3a53115e70d28084
an incorrect value caused the shuffle icon to not display the correct status while true by way of pushing the image to be displayed far from the bounds of its viewport.
Change-Id: I2bd5db05b053952306d62f9cbd0d13d720141e58
Reviewed-on: http://gerrit.rockbox.org/517
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Add a number of missing collaborators to the /rockbox/wps/AUTHORS file and create
a new header to share between the .fms, .sbs, and .wps files in the /rockbox/wps/
directory. No functional changes made, purely cosmetic.
Change-Id: Id4b22d438e340da4dfc18ec8bf0e40088bdc606e
Reviewed-on: http://gerrit.rockbox.org/368
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
adds 'show icons: on' to cabbiev2.cfg file.
when you switch theme away from cabbiev2 to a theme
with 'show icons: off' then switch back to cabbiev2
the icons are still off which doesnt mimic the default
settings presented by rockbox.
Change-Id: Iee051c687a9a6843fece96a2a16280916b1d2599
Reviewed-on: http://gerrit.rockbox.org/325
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
skin bars now automatically create the touch region the same size
as the bar on touchscreen targets. This means touches will
magically "just work" for reveresed bars (rtl or otherwise).
~5% padding is added on all 4 sides of the region rectangle but
this may need to be tweaked.
Please consider the 'progressbar' and 'volume' touchregion actions
to be deprecated.
Kudos to my new wife for figuring out the bleedingly obvious way to
do this!
Change-Id: I997a7bcaa70fce9885808aae27953c7676e9c2ff
This patch brings back iAudio M3 cabbiev2 (128x96x2) support again.
Change-Id: Ibb9ccc6f0d0acde5b99e2c41e08da3999129f817
Reviewed-on: http://gerrit.rockbox.org/274
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
wpsbuild.pl is enhanced to produce fallback themes that were previously
hardcoded in buildzip.pl. It also recognizes resolution strings as
regular expressions now so you can specify resolution dependant settings
as <setting>.<regex>: <value> (needed to support single themes on multiple
resolutions). The WPSBUILD syntax completely changed as
well and it includes the fallback themes as well. Ultimately wpsbuild is
also able to install .fms files.
Change-Id: Idf5994f17b9750983d7bc3ef583540a8cdae1dde
Change-Id: I49ce0bfdc228bed55d47b5e743a7fa87ccd4da8a
Reviewed-on: http://gerrit.rockbox.org/197
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Internally remove some hacks around how %x() is handled.
%x() inside the default viewport will no longer work if
other viewports are used, so if you are using viewports and
%x() make sure it is in a viewport!
Change-Id: I8ecab805d55fc0f8476ff0516cba38e23400aa20
The new iconset features transparency which can be more easier generated
from svgs and looks better. For for bigger displays there are new sizes.
The bmps are the generated from the SVGs added to the tree and
create-icons-from-tango.pl is updated to enable easy generation.
rockbox-clef.svg is changed to have a bit more border.
NOTE: Icons for greyscale are unchanged. Someone needs to update them, I don't know how to do it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31059 a1c6a512-1295-4272-9138-f99709370657
It's as big as the usual popup and makes it easier to control the volume. Also makes our fine-grained volume changes more visible.
popup.xcf is updated to contain the volume layers.
Idea and some skin code taken from FS#12254.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31056 a1c6a512-1295-4272-9138-f99709370657
check the manual...
%Tl(..., &action) -> %Tl(..., action, repeat_press)
%Tl(..., *action) -> %Tl(..., action, long_press)
%Tl(..., !action) -> %Tl(..., action, reverse_bar)
and a new allow_while_lock to make the region fire when softlocked
these options must all be after the action name, but otherwise the order doesnt matter. And for the setting_inc/dec/set action the setting name must follow the action name, *then* the options
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30219 a1c6a512-1295-4272-9138-f99709370657
