The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
Fixes deficiencies with the button system on the X3
The x3 has an interesting button layout.
Multiple key presses are NOT supported unless
[BUTTON_POWER] is one of the combined keys
As you can imagine this causes problems as the power button takes
precedence in the button system and initiates a shutdown if the
key is held too long
instead of BUTTON_POWER use BUTTON_PWRALT in combination with other keys
IF using as a prerequsite button then BUTTON_POWER should be used
Multiple buttons are emulated by button_read_device but there are a few
caveats to be aware of:
Button Order Matters!
different keys have different priorities, higher priority keys 'overide'
the lower priority keys
VOLUP[7] VOLDN[6] PREV[5] NEXT[4] PLAY[3] OPTION[2] HOME[1]
There will be no true release or repeat events, the user can let off the
button pressed initially and it will still continue to appear to be
pressed as long as the second key is held
Tree scrolling is PLAY+NEXT or PLAY+PREV
Change-Id: I88dfee1c70a6a99659e8227f5becacc50cc43910
(A lot of work was done on this thing, for a target that hasn't been compileable
at least since we moved to git..)
Change-Id: Ibface9392f3251b5be4bf1e0c4d12639c4f1662d
Provided by Roman Stolyarov
Integration, Refactoring, and Upstreaming by Solomon Peachy
X3II confirmed working by forum tester, X20 is nearly identical.
This includes bootloader, main firmware, and the flash image patcher.
Eventual Todo:
* Further refactor AGPTek Rocker & xduoo hiby bootloaders
* Further refactor AGPTek Rocker & xduoo hosted platform code
Change-Id: I34a674051d368efcc75d1d18c725971fe46c3eee
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Simply extends the current isqrt() to be able to do fractional bits
and improves the initial estimate using clz(). iqrt() itself is
no more and is equivalent to fp_sqrt(x, 0). The original also had
a small bug where the guess comparision should have been >=, not >.
Uses no large integer math or division and is very accurate
(simply returns a truncated fraction).
Change-Id: I2ae26e6505df1770dc01e56220f7385369f90ae9
seems more logical to me, and is more consistent, since
"SAMSUNG_YH92X_PAD" is already used in the tex files.
Change-Id: Ie9a9d850ea86155a7dcf86c88a22a420a10a3837
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.
It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.
lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.
All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).
Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
Although both players basically have the same keys, the
differences in the layout is rather big, so I think both
deserve their own keymaps.
(On the yh820 the FFWD/PLAY/REW buttons are located above the
direction keys, on the yh920 at the side of the player.
Furthermore the yh920/925 has a REC switch, whereas
yh820 has a push button.)
Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15
Reviewed-on: http://gerrit.rockbox.org/814
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
This patch completes the plugin keymaps for the Zen X-Fi3 and enables those plugins for compilation.
One key was changed in "button-target.h" for compatibility with Rockboy.
This also caused the changes to "keymap-zenxfi3.c", to keep the stock functionality (no further changes in here).
Change-Id: Ic222faf89e9a9a2332a49d6e532cedb6eb16d3d7
Reviewed-on: http://gerrit.rockbox.org/762
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The "plot" variable was left NULL when FFT_FREQ_SCALE key wasn't defined.
Please add FFT_FREQ_SCALE keys to targets missing them! I added the key
for Clip Zip and reminders for others.
Change-Id: I49c0dc2ea2e5bc494db793da7a2f3059b4fb20df
Helps appearance especially with the spectrogram view since it no longer
must be scrolled out of the way to avoid artifacts.
Additionally, allow settings to be saved and clean up some misellaneous
stuff to help graphics performance.
Still other "pointless" work to do on it... :-)
Change-Id: Iff2f725b0237ffb430e85f591675c2062b159abc
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
Included are drivers for buttons, backlight, lcd, audio and storage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
* Add backlight_force_on() which forces to turn on backlight even when the setting is set to Off. use this in lamp.
No functional change except lamp.
See aslo FS#9883.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29128 a1c6a512-1295-4272-9138-f99709370657
Also fix some errors in pluginlib_actions.c which
were causing the SA9200 build to crap out when
building plugins, and also disable plugins for the
SA9200 in the configure script (no idea why they
were enabled in the first place!)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28316 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also make exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex() introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases rb->default_event_handler_ex() was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27873 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also it makes exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases it was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27862 a1c6a512-1295-4272-9138-f99709370657
