avoids complicated index calculations in the loops.
saves 0.3MHz decoding a 64kbps test file on h300 (cf) and
0.2MHz on c200 (pp)
Change-Id: I1918912d9a4502f89980c6bb270ec2ef10a07010
Signed-off-by: Nils Wallménius <nils@rockbox.org>
on a target with a disk.
Change-Id: I37c875c9cd014eb61fe5232dab0f4b8f15f057dd
Reviewed-on: http://gerrit.rockbox.org/319
Tested-by: Thiago Okada <thiago.mast3r@gmail.com>
Reviewed-by: Frederik Vestre <freqmod@gmail.com>
Tested-by: Frederik Vestre <freqmod@gmail.com>
speeds up decoding of a 64kbps test_file by 1.5MHz on c200 (pp)
and 1.9MHz on fuzev1 (amsv1)
Change-Id: I1db460b634eba608c3e00541d96fc93d5a05710b
Signed-off-by: Nils Wallménius <nils@rockbox.org>
speeds up decoding of a 64kbps test file by 0.5Hz on h300 (cf)
0.9MHz on c200 (pp) and 0.2MHz on fuzev1 (amsv1)
Change-Id: Ib537c2393fa6dca0b61e4e9f80eef5e688c2c2bd
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Unroll overlap add loop by four and use memcpy for copying
instead of loops.
Change-Id: I17114626a395d5972130251d892f851bc86e3a6a
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Replace complicated macro doing three 16*16 muls and add an inline
asm implementation for arm, speeds up decoding a 64kbps test file
by 0.5MHz on c200 (pp) and gives slightly better precision.
Change-Id: I6fc5b83c210f01bffdc38aec54cc5a8b646d8169
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Hoist load of coefficients out of the loop.
Speeds up decoding of a 64kbps test file by 0.6MHz on h300 (cf)
0.2MHz on c200 (pp) and 0.1MHz on fuzev1 (amsv1)
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Change-Id: I4be0059fc2a77748575f5fc9378f7f348d64f1c4
Skip expensive multiply-accumulate loop when gains are 0 and
just copy using memcpy if soure and destination are not the same
Speeds up decoding of a 64kbps test file by 6MHz on h300 (cf)
7MHz on c200 (pp) and 6MHz on fuzev1 (amsv1)
Change-Id: Ibbc9ddfd45a9ac661467b1327b8c67761924fb8b
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Reorder operands to take advantage of the early termination of
multiplications. Saves 2.5MHz decoding a 64kbps opus test file
on c200 (pp).
Change-Id: I470266dc870ab183ece3b23426d41e2a64342a71
Speeds up decoding of 64kbps test file by 6.3MHz on h300 (cf)
and 1.2MHz on c200 (pp).
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Change-Id: I08c2c332153abcbef9447c81986777fd2fcc73fe
speeds up decoding of 64kbps test file by 19MHz on h300 (cf)
and 2.5MHz on c200 (pp)
Change-Id: Idacd2f8962c20c518055d586daeec6b932b7ded2
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Although the mimetype for jpeg is clearly image/jpeg, many tagging
applications seem to use image/jpg, so we'll support that too.
Change-Id: Icb9063fd5a9d8aea169eaa7f74ac52b72603d148
Reviewed-on: http://gerrit.rockbox.org/318
Reviewed-by: Michael Giacomelli <mgiacomelli@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Speeds up decoding of a 64kbps test file 26MHz on H300 (cf) and
2MHz on c200 (pp)
Change-Id: I2fb4fe6c0a29321087e02fbd17fd1b1eb84e7b57
Signed-off-by: Nils Wallménius <nils@rockbox.org>
Remove downsampling code from deemphasis loop as we don't use
it and remove multiplications that are not relevant when
not using custom modes. Saves 1.4MHz on h300 (cf), 4.3MHz on
c200 (pp) and 4.6 on fuzev1 (amsv1).
Change-Id: Iab3f1d737a656a563aaa351d50db987a9cff2287
Saves about 30MHz on h300 (cf) and 1.5MHz on c200 (pp) decoding a
64kbps test file. Stack usage is still below 70%.
Change-Id: Ib13df9011adb4eef4bb91a52e5a32741c8bf8988
Speeds up decoding of a 64kbps opus test file by 34MHz on h300 (cf),
24MHz on c200 (pp) and 13MHz on fuzev1 (amsv1)
Change-Id: I0dce6b3bfe6c81d0a722dfebb13891b9a428c6ba
Synchronised with opus repo on github (https://github.com/freqmod/rockbox-opus)
Status:
* Seeking ported from speex, but fails on some cases (e.g. seek to granule 0)
* ReplayGain parsing needs to be reworked, we do vorbis-style replaygain now.
http://wiki.xiph.org/OggOpus#Comment_Header explicitly forbids these in
favour of R128_TRACK_GAIN tag.
* No optimisation yet, source files still nearly identical to opus upstream
* Multi-stream opus files may not be parsed correctly
Change-Id: Ia66f1027dc1d288083e3c57b2816700078376f9a
Reviewed-on: http://gerrit.rockbox.org/300
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Bertrik Sikken <bertrik@sikken.nl>
%V(0,50%,75%,50%,-) - make a viewport at x=0, y=half the lcd height,
75% lcd width and the remaining height (the other half) of the lcd.
Change-Id: If26ccb65e8dc52c9225f3fd6d7b222d770add0f0
Reviewed-on: http://gerrit.rockbox.org/184
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Tag params where a [] group is followed (but not immediatly) by
a * will not parse correctly. e.g [si]iii|s* will attempt to find
an 'i' after the second s instead of looping s's
Change-Id: I3982f726b6539818f8332334b263b673259f98ef
Since gcc 4.4 the MIPS port no longer recognizes the "h" asm constraint.
It was necessary to remove this constraint in order to avoid generating
unpredictable code sequences. We can achieve the same effect using
128-bit types.
See also:GCC 4.4 release notes at http://gcc.gnu.org/gcc-4.4/
Change-Id: I713cdf57cde1a989ad960aa441ab1ccf51f1cdc6
Emulates the basic "Meier" crossfeed (2 capacitors, 3 resistors)
as discussed in
http://www.meier-audio.homepage.t-online.de/passivefilter.htm
This crossfeed blends a bit of low-pass filtered L signal into
the R signal (and vice versa) while adding about 300 us delay
to the crossfed-signal. A difference with the crossfeed already
present in rockbox, is that this algorithm keeps the total
spectrum flat (the one currently in rockbox accentuates
low-frequency signals, making it sound a bit muffled).
This implementation is quite lightweight, just 3 multiplies per
left-right pair of samples. Has a default C implementation and
optimized assembly versions for ARM and Coldfire.
The crossfeed effect is quite subtle and is noticeable mostly
one albums that have very strong left-right separation (e.g.
one instrument only on the left, another only on the right).
In the user interface, the new crossfeed option appears as
"Meier" and is not configureable. The existing crossfeed is
renamed to "Custom" as it allows itself to be customised.
There is no entry for the user manual yet.
Change-Id: Iaa100616fe0fcd7e16f08cdb9a7f41501973eee1
When it was inactive but enabled, the format change hook was dropping
through to code that it shouldn't execute without it also being active
in processing samples.
Change-Id: Ie7899df0395d3f0d10f2bf2b55ea549dd06749a7
Several of the problem samples on the tracker use values outside this
range. Trying the larger table doesn't quite seem to fix things, but
its only a small amount of additional memory and looking at ffmpeg,
I think the larger table is correct.
Change-Id: Id046e62b68550701aa1f80c9abd0a1dcd711bd0d
No known samples are fixed by this problem, but I haven't tested many.
Backport of ffmpeg revision 26388.
Change-Id: Ife9654b7477a432834e3cab2cb43d16da071445a
This is needed on app targets as e.g. ".section .icode" leads to the
code getting linked to incorrect locations (0x0 in this case).
Change-Id: Ic28c5ae6d4f8001d211d685b5ca92d5ffff0c7b2
Use memmove instead of memcpy for overlapping copy, fixes
crackling in sims and warble on my system. Native targets
seem to have been unaffected.
Change-Id: I265d4ce373e224581bd2f5ba15c75b473ec231f2
If the settings, like samplerate, were to go out of range where
timestretch drops out of processing and then go back to the same as
when they were valid, it would fail to switch back on by itelf.
Change-Id: Ic5bcb268540b0db8e0483117b8a5a0ce5c5a9db0
Makes quite a huge difference to get rid of 64-bit math in a hot
area. Cuts about 12 MHz. Generic routine generates good code on
ARM and asm cuts no instructions there.
Change-Id: I4ac647406006c42004f9f5ab396cbf4e85688854
Wrap up the the stereo case into loops and remove unused calculations
hanging out in tdspeed_update().
A wee little bit of code style and column policing.
Change-Id: I8dd3ab4b3e7e56b55dc00c00f3e32996228cc457
