Compiling the plugins takes quite a long time and is unnecessary
if you're only working on the core code. Having an option is nicer
than having to edit the configure script by hand.
Change-Id: I401867355d897ce3fd899d9daf25ea9afcc380f0
It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.
Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747
It needs screenshots and slightly better installation instructions
Includes bits shared with other HibyOS platforms
Change-Id: I1c1974143b5badf1aca5c3281556ce553ab1b8a5
The nightly manual builds previously only included targets that were
marked as "stable" -- The M3K and Q1 are not because they lack rbutil
integration, but we would like to provide the manual builds regardless.
Change-Id: I113e0576753ba6bb1518da2169c1b0b84aebd2f4
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
LO volume will only be put to user-defined max volume
if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot
What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
(sometimes it's completely silent, sometimes there's
a click)
- Audio uses 16-bit volume scaling, so clicking/popping
is pretty bad at lower volumes - need 32 bit volume
scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support
Unknowns:
- Stereo Switch pins: Direction select, AC_DC
(probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?
"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth
Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
Import non-free firmware image from linux-firmware package.
Firmware loading works but is disabled at compile time because just
loading firmware without configuring device results in higher power
consumption without any benefit to end user.
Change-Id: I8fd252c49385ede1ea4e0f9b1e29adeb331ab8ae
But for stage1 (and non-hosted targets) we can stick with -std=gnu++03.
This keeps everyone happy with no apparent regerssions on older
host compilers.
Change-Id: I1300574557bc8d4d13e5cf07d4ae85645998f071
Add --with-sysroot= to the configure args of glib and dbus because
otherwise they get confused and try to use host system dependencies.
Also fix the broken restart logic so you can actually restart a build.
Change-Id: Ib456c04845d80cc923dcc6b83e57f67a0868104b
Basically it defaults to using C++17, which breaks the GCC compilation.
Instead, explicitly specify -std=c++03, which should work everywhere.
Change-Id: I821591dbbac4fab4b1d930702ed66c7c767b5c92
SPL and UCL-compressed bootloader are now packed into one output,
bootloader.m3k, eliminating the separate SPL build phase.
The Rockbox bootloader now has a recovery menu, accessible by
holding VOL+ when booting, that lets you back up, restore, and
update the bootloader from the device.
Change-Id: I642c6e5fb83587a013ab2fbfd1adab439561ced2
It never worked, and hasn't compiled in something like a decade, Given
the HW capabilities (limited onboard flash, no expandability) there's
really no point in trying to fix/complete it.
Change-Id: I7d175089840396f8891645bd10010d730dd5bfdc
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
Convert both instances of the apple stop sign constant
to char array instances. This ensures sizeof will work
as expected when applied to the constant.
Change-Id: I8599f7b0a00031e944e654b12a0bc59309926807
I added this because it is present on the FiiO M3K's SPL, but nothing
in Ingenic docs suggest this means anything.
Just get rid of it; the M3K boots fine without it.
Change-Id: I2e480b8c0ada386b0e772db49c0a7ebd32ffc7ea
Instead of 'ifdef ENABLEPLUGINS' (which always gets set) use
'ifeq(yes,$(ENABLEPLUGINS))' which means any value other than 'yes' is
treated as a negative.
Change-Id: I6c92eef5565328f1bb9f64a4d379dec697354224
Note: It's marked as 'unusable' right now, so it won't show up
on build.rockbox.org, nor will daily & voice files be
created.
Change-Id: I5ea133477a6b4c0296c46757d0375994ad812cc5
It seems that 'toolset=' in tools/configure was set but not used, with
the build system only generating a hardcoded set of tools. This change
fixes the issue by exporting the required tools in the TOOLSET variable,
and having root.make append those to the TOOLS list.
Change-Id: I07024bdf1dd2260c32cfeecaba0d3bb5bf00346d
Freetype-config has been deprecated and is no longer included in libfreetype-dev. Pkg-config serves as its replacement.
Convttf isn't built as part of Rockbox by default, but manually doing so will currently fail even when libfreetype-dev is installed.
Change-Id: Iafc31df3b40c11d7c790189eb9d3788ba97d3e54
I wanted to build into a 'toolchain' directory like this:
$ tools/rockboxdev.sh --dlwhere=toolchain --builddir=toolchain/build --prefix=toolchain/bin
This failed twice:
a) the extraction stage could not uncompress because of the relative
paths, so convert them to absolute paths in the script to fix the issue.
b) patches could not be applied because 'rockboxdevdir' was assigned a
string with the directory twice and '\n' in the middle. Using readlink,
this now works.
Change-Id: I9c7c30812e1fb4b58db7e6561d73678f34714c91
I hit this error and its message confused me because I interpreted it as
"bzip2 executable could not be found". The message was also outdated
because xz is supported meanwhile. Update the message to something
hopefully more helpful.
Change-Id: Ide2f8809dc0f8159d7d04fa22c29607dd6b35792
