Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
Either by mistake or because its meaning changed, usb_powered() doesn't mean
what the name suggest, so clarify its meaning by renaming it to usb_powered_only.
So use of usb_powered() are replaced by usb_inserted() when it makes more sense.
Change-Id: I112887e2d8560e84587bee5f55c826dde8c806d8
Reviewed-on: http://gerrit.rockbox.org/1097
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Some USB controllers like the one of the Rockchip 27xx handle some
requests in pure hardware. This is especially a problem for two
of them:
- SET ADDR which is used by our core to track the DEFAULT/ADDRESS
state and is required for the drivers to work properly
- SET CONFIG which is used by our core to initialise the drivers
by calling init_connection()
In these cases we need a way to notify the core that such requests
happened.
We do this by exporting two functions which directly notify the
core about these requests and perform the necessary init steps
required without doing the actual USB transfers. Special care is
needed because these functions could be called from an interrupt
handler. For this reason we still use the usb_queue and introduce
new IDs so that they are processed in order and safely.
No functional change is intended, both in the usbstack and on
targets without such quirks.
Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
This option allows accessing the card slot from "dumb" USB hosts like some car
audio systems that do not handle multi-LUN devices.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30489 a1c6a512-1295-4272-9138-f99709370657
Enable support for the "force" mode of USB charging. This should work on Gigabeat S and Nano2g (and any other future target which has a RB usb stack and supports charging) - if a host connection is not detected within 10 seconds of USB insertion, assume that the connected device is an AC charger and charge anyway, if the user has specified "force" as the mode.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26594 a1c6a512-1295-4272-9138-f99709370657
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657
This needs support for usb interrupt transfers, so there are some changes in various USB drivers as well (only usb-drv-arc supports it at this point, others won't have working HID yet).
HID is disabled for now, as the apps/ part is not included yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20962 a1c6a512-1295-4272-9138-f99709370657
This only works for devices that expose a removable device, so for now the gigabeat S is out of luck.
(slightly modified from FS#9993)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20244 a1c6a512-1295-4272-9138-f99709370657
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
