Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
36739 commits 17 branches 142 tags 291 MiB
Commit graph

88 commits

Author SHA1 Message Date
Aidan MacDonald
acc7d16e3b Fix some hardcoded assumptions in recording.c 
There were some hardcoded branches handling left/right gain for line-in
or FM radio inputs. If the target only has a microphone, these bits are
useless and cause compile errors due to missing audiohw settings, etc.
This patch #ifdef's them out.

Change-Id: If6a6918b2fabb256261c84651803bbf44deacb1a
 2022-01-17 00:37:12 +00:00
Ulrich Hecht
c302c157d5 peakmeter: re-enable on hosted platforms 
Has been disabled since HW codec support was dropped, but works fine. Tested
on Surfans F20.

Change-Id: I97f06a009048e8135ca21118467c491e7077fa4f
 2021-08-19 18:09:48 +00:00
Solomon Peachy
804a49886a statusbar: Make statusbar height equal SYSFONT_HEIGHT 
And size elements horizaontally based on SYSFONT_WIDTH

Unfortunately we need 16px icons to make 16px statusbar look right
but at least it _works_ properly now.

Also: all targets currently use 8-px SYSFONT, except some hosted bootloaders

Change-Id: I0cdf97e6ef47ec49693ef79667b200595b4fe075
 2020-10-26 19:52:40 +00:00
Solomon Peachy
2127906384 peakmeter: Fix warning on some hosted targets 
Change-Id: Ieae0b08a2f747955ad3e392fbff90884dc4265ef
 2020-07-24 18:29:04 -04:00
Solomon Peachy
5dbb757670 peakmeter: Fix simulator build breakage introduced in 8cb55546 
Change-Id: I86c327cf7053e71df7550b6d0673262035f95978
 2020-07-24 17:50:31 -04:00
Solomon Peachy
8cb555460f [3/4] Completely remove HWCODEC support 
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.

Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
 2020-07-24 21:20:13 +00:00
William Wilgus
a06d9c85f7 Auto-Ranging Time Formatting For Menus (hh:mm:ss:mss) 
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'

Time is auto-ranged dependent on value

Adds talk_time_intervals to allow time values to be spoken similar to
display format:  x Hours, x Minutes, x Seconds, x Milliseconds

Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile

RTL Languages ARE supported

Negative values ARE supported

Backlight on/off are now Always and Never to share formatter with LCD
Timeout

Added flag to allow ranged units to be locked to a minimum index

Added flag to allow leading zero to be supressed from the largest unit

merged talk_time_unit() and talk_time_intervals()

optimized time_split()

optimized format_time_auto()

Backlight time-out list same as original

Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
 2018-12-22 12:27:21 -06:00
Michael Sevakis
e189b33ff4 Clean up peak calculating code. 
Mixer needn't keep peak data around that will never be used. Just
pass pcm_peaks structure to it instead of allocating for every
channel. Plugin API becomes incompatible.

vu_meter digital mode was still using global peak calculation;
switch it to playback channel like the rest.

Remove some accumulated soil peaks inside pcm.c and make it more
generic.

Change-Id: Ib4d268d80b6a9d09915eea1c91eab483c1a2c009
 2012-05-02 20:53:07 -04:00
Björn Stenberg
0942e2a0f7 Changed the FOR_NB_SCREENS macro to always be a for loop that declares its own loop variable. This removes the need to declare this variable in the outer scope. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30756 a1c6a512-1295-4272-9138-f99709370657
 2011-10-15 19:35:02 +00:00
Bertrik Sikken
2e58d5935d Make function calc_db in peakmeter.c static 
Remove some unneeded #include "peakmeter.h"

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30713 a1c6a512-1295-4272-9138-f99709370657
 2011-10-04 21:25:26 +00:00
Michael Sevakis
22b6def065 Use playback channel directly for peakmeters and plugins using peak calculation. Also, for now, don't allow mixer playback to overlap recording, even if full duplex works. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30119 a1c6a512-1295-4272-9138-f99709370657
 2011-07-02 11:55:38 +00:00
Peter D'Hoye
82f4c60db4 Make the histogram code usable for playback as well. Move the recording histogram code to peakmeter, rename it to remove the recording reference, and rename anything referring to it as well. Change the drawing code so there are more options to position them. This may change your histogram settings, so check after upgrading. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29969 a1c6a512-1295-4272-9138-f99709370657
 2011-06-05 12:36:27 +00:00
Jonathan Gordon
261c56ba59 FS#11867 - Add 2 new tags to allow skins to display themed peakmeters 
%pL for the left channel, %pR for the right channel... usable as a value, conditional or bar (exactly the same as %pv/%bl/etc)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29043 a1c6a512-1295-4272-9138-f99709370657
 2011-01-13 06:48:39 +00:00
Marcin Bukat
56c4e9fa60 Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28425 a1c6a512-1295-4272-9138-f99709370657
 2010-10-31 21:09:34 +00:00
Thomas Martitz
4e26db3f35 I shouldn't have touched backlight.c at all :\ Also fix the yellow in peakmeter.c 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27022 a1c6a512-1295-4272-9138-f99709370657
 2010-06-21 17:26:50 +00:00
Thomas Martitz
35e8b1429a Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.

Should be no functional change to targets or the simulator.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
 2010-06-21 16:53:00 +00:00
Jonathan Gordon
38ef849d06 slightly rework peakmeter handling to make it cleaner and be able to be used in conditionals 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25913 a1c6a512-1295-4272-9138-f99709370657
 2010-05-09 13:01:59 +00:00
Thomas Martitz
50a6ca39ad Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes). 
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
 2010-05-06 21:04:40 +00:00
Peter D'Hoye
be90f74e89 Histogram display on recording screen. Based on the work of Jvo Studer in FS #5021 but reduced and reworked since the recording screen code changed quite a bit since his patch. For now enabled on iriver h1x0 and h3x0 only. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25007 a1c6a512-1295-4272-9138-f99709370657
 2010-03-03 22:16:08 +00:00
Bertrik Sikken
8d5dbf4c14 Clean up some unused #includes 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20975 a1c6a512-1295-4272-9138-f99709370657
 2009-05-17 11:56:06 +00:00
Jonathan Gordon
701a593c5d continuation of last nights statusbar cleanup. 
accept FS#9858 and FS#9859
make the rec and fm screens force the statusbar the correct way now which doesnt need extra status variables


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19904 a1c6a512-1295-4272-9138-f99709370657
 2009-02-02 03:14:51 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*. 
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
 2008-11-01 16:14:28 +00:00
Peter D'Hoye
496e1f7e85 First step of the recording screen redesign. The screen is split into a fixed top part containing essential data and the peakmeters/triggerbar, and a bottom part that is in fact a list. The list contains the items that can be changed, and also some stuff that isn't important enough to be on the top part, like the filename. That filename is now shown completely. If the font is too big to have 6 lines on the display, sysfont is used. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18202 a1c6a512-1295-4272-9138-f99709370657
 2008-08-06 20:12:44 +00:00
Bertrik Sikken
f4d4a6ab60 Implement FS#8947 - Add a stub in the simulator for ata_disk_is_active. This make it possible to clean up some #ifdef SIMULATOR macros. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17927 a1c6a512-1295-4272-9138-f99709370657
 2008-07-03 13:37:57 +00:00
Peter D'Hoye
05cb42164b Fix FS #9128: invalidate the peakmeter scales when switching between playback and recording. This causes them to be recalculated so they show up correctly when playback and recording use different viewport sizes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17869 a1c6a512-1295-4272-9138-f99709370657
 2008-06-29 08:05:00 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Peter D'Hoye
90b616913b Peakmeters: use screens[].getwidth() and not screens[].width as the latter one returns the LCD width (which really shouldn't be there) - the former returns the width of the viewport. Do some code police as well. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17841 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 16:59:56 +00:00
Peter D'Hoye
db00c568c9 Fix broken peakmeters: peakmeter was using viewport drawing code but absolute screen coordinates for display updating. To Do: peakmeter must completely use viewport info for its updates. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17838 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 16:31:06 +00:00
Jonathan Gordon
ff469ab573 Updated recording trigger screen (seems to be a feature almost noone uses?) 
problems/complaints in http://forums.rockbox.org/index.php?topic=16837.0
there is a known issue that on this screen the stop icon wont update, I dont know why and noone else wants to look at it, so hopefully this will force another set of eyes on it.. this is only a graphical issue... recordings still work fine


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17643 a1c6a512-1295-4272-9138-f99709370657
 2008-05-28 10:55:39 +00:00
Bertrik Sikken
db2d61f4ea Killed unnecessary global variables by making them static. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17184 a1c6a512-1295-4272-9138-f99709370657
 2008-04-20 10:24:15 +00:00
Dave Chapman
d02c79c03f Commit viewports-in-WPS patch (FS#8385). This adds the %V tag - see the CustomWPS page for details (shortly...). There is still some work to do - decide how to handle font references, decide how to handle conditionals. Plus checkwps is broken - I'll fix that in a separate commit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16733 a1c6a512-1295-4272-9138-f99709370657
 2008-03-21 19:38:00 +00:00
Peter D'Hoye
9c3f6c4079 Simplify that clip indicator reset code a bit 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16559 a1c6a512-1295-4272-9138-f99709370657
 2008-03-08 20:32:37 +00:00
Peter D'Hoye
0ecdb37e99 Fix FS #8514 (remote peakmeter issue) by separating the peak release times for the screens. Thanks to amiconn for pointing in the right direction. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16234 a1c6a512-1295-4272-9138-f99709370657
 2008-02-06 21:53:07 +00:00
Jens Arnold
8b44601a7c Disable highperf mode in the peakmeter for swcodec targets, as it makes no sense. Improves responsiveness a lot with a peakmeter-enabled wps on targets with slow lcd updates (e.g. G5). Added a comment why highperf mode is needed for MAS targets. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15140 a1c6a512-1295-4272-9138-f99709370657
 2007-10-16 08:34:51 +00:00
Michael Sevakis
6077e5b7c8 Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15006 a1c6a512-1295-4272-9138-f99709370657
 2007-10-06 22:27:27 +00:00
Nils Wallménius
c70d9462be Make a few private functins static and use fewer bytes for constants 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14783 a1c6a512-1295-4272-9138-f99709370657
 2007-09-20 16:44:28 +00:00
Jens Arnold
945462edef Make peakmeters work for real in swcodec simulators instead of just showing random movement. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14650 a1c6a512-1295-4272-9138-f99709370657
 2007-09-09 09:07:22 +00:00
Peter D'Hoye
6109d39469 only build the clipcounter for targets with recording 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14467 a1c6a512-1295-4272-9138-f99709370657
 2007-08-26 21:34:36 +00:00
Peter D'Hoye
583f186ce4 Implement FS #2976: Clip Counter for recording screen. If enabled in peak meter settings, it shows the number of times clipping occurred (clip indicator going on). Count is reset on recording start and only counts during actual recording. Stays on screen when stopping or pauzing. Also fix a drawing bug when peakmeters start at a non-zero x offset. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14455 a1c6a512-1295-4272-9138-f99709370657
 2007-08-25 15:53:54 +00:00
Jens Arnold
99ff02d2cb Make peak release work per tick as intended. But that's too fast, so it's not the final solution. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14397 a1c6a512-1295-4272-9138-f99709370657
 2007-08-20 06:36:24 +00:00
Peter D'Hoye
ebcf06d237 Make peakmeter release setting work in units per tick (was units per read), add the unit and make it voiced. Make old leftover in lang file deprecated 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14390 a1c6a512-1295-4272-9138-f99709370657
 2007-08-18 23:03:03 +00:00
Jens Arnold
47bf6c5a5a Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13136 a1c6a512-1295-4272-9138-f99709370657
 2007-04-12 22:12:13 +00:00
Nils Wallménius
b41e93ae63 Draw peakmeter scale marks in foreground color instead of inversed background color, fixes FS #6855 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12840 a1c6a512-1295-4272-9138-f99709370657
 2007-03-19 16:49:55 +00:00
Jens Arnold
3a37f46fc9 Fix CONFIG_BACKLIGHT warnings. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12393 a1c6a512-1295-4272-9138-f99709370657
 2007-02-18 10:07:27 +00:00
Jens Arnold
2597a13497 Next round of static'ing and related fixes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11836 a1c6a512-1295-4272-9138-f99709370657
 2006-12-25 14:01:47 +00:00
Martin Scarratt
d8103f3ba6 Recording trigger for software codec targets 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11479 a1c6a512-1295-4272-9138-f99709370657
 2006-11-09 12:27:56 +00:00
Michael Sevakis
0f5cb94aa4 Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
 2006-11-06 18:07:30 +00:00
Martin Scarratt
c8bd9129bf Button action code for recording screen. Shouldnt make any noticable difference in recording screen button operation except for H300 I-River remote, which should now work as expected, -10 button = LCD off 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10666 a1c6a512-1295-4272-9138-f99709370657
 2006-08-20 21:33:40 +00:00
Magnus Holmgren
0b35bcfc71 Guard against division by zero in the peak meter (the settings menu allows the user the set range min and max to the same value; maybe that should be changed too). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10631 a1c6a512-1295-4272-9138-f99709370657
 2006-08-17 09:35:27 +00:00
Peter D'Hoye
5fc66e58dd Automatic Gain Control during recording. At this point only compiled for iriver h1x0 and h3x0. Patch FS#4748 by Jvo Studer, Martin Scarratt and myself. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10625 a1c6a512-1295-4272-9138-f99709370657
 2006-08-16 23:26:55 +00:00