* HOME_DIR is now either "/" or special "<HOME>"
* target-specific "home dir path" is defined solely by PIVOT_ROOT
* PIVOT_ROOT path is now defined in toplevel config files
* Make Samsung YP-R0/R1 and SONY_NWZ use PIVOT_ROOT too
* Do not prepend PIVOT_ROOT path if the path already has it!
* Do not play these games for __PCTOOL__ builds
Change-Id: I3d51ad902a5f9cafe45ba15ba654f30f1ec6113a
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
Provided by Roman Stolyarov
Integration, Refactoring, and Upstreaming by Solomon Peachy
X3II confirmed working by forum tester, X20 is nearly identical.
This includes bootloader, main firmware, and the flash image patcher.
Eventual Todo:
* Further refactor AGPTek Rocker & xduoo hiby bootloaders
* Further refactor AGPTek Rocker & xduoo hosted platform code
Change-Id: I34a674051d368efcc75d1d18c725971fe46c3eee
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
seems more logical to me, and is more consistent, since
"SAMSUNG_YH92X_PAD" is already used in the tex files.
Change-Id: Ie9a9d850ea86155a7dcf86c88a22a420a10a3837
Reorganization
- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
hosted targets. Most device specific code is in the
firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.
Code cleanup
- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
(see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.
Misc
- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.
Includes
- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/
Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.
Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/
The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.
Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.
Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
Either by mistake or because its meaning changed, usb_powered() doesn't mean
what the name suggest, so clarify its meaning by renaming it to usb_powered_only.
So use of usb_powered() are replaced by usb_inserted() when it makes more sense.
Change-Id: I112887e2d8560e84587bee5f55c826dde8c806d8
Reviewed-on: http://gerrit.rockbox.org/1097
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Although both players basically have the same keys, the
differences in the layout is rather big, so I think both
deserve their own keymaps.
(On the yh820 the FFWD/PLAY/REW buttons are located above the
direction keys, on the yh920 at the side of the player.
Furthermore the yh920/925 has a REC switch, whereas
yh820 has a push button.)
Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15
Reviewed-on: http://gerrit.rockbox.org/814
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
add_event_ex is added that takes an extra user_data pointer. This pointer is
passed to the callback (add_event and add_event_ex have slightly different
callbacks types). All callbacks also get the event id passed. Events added
with add_event_ex must be removed with remove_event_ex because the user_data
pointer must match in addition to the callback pointer.
On the other add_event is simplified to omit the oneshort parameter which
was almost always false (still there with add_event_ex).
As a side effect the ata_idle_notify callbacks are changed as well, they
do not take a data parameter anymore which was always NULL anyway.
This commit also adds some documentation to events.h
Change-Id: I13e29a0f88ef908f175b376d83550f9e0231f772
HOME_DIR is intended for not-so-advanced files which shall be user
visible, and thus not in /.rockbox. Therefore HOME_DIR is translated
to $HOME on RaaA, /sdcard on android, the internal memory on ypr0
and "/" on native targets.
ROCKBOX_DIR ("/.rockbox") already existed as special and is translated
to whatever the real rockbox dir is on the target (e.g. /sdcard/rockbox
on android), but it's not suitable for some files we generate
(e.g. battery-bench.txt).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31430 a1c6a512-1295-4272-9138-f99709370657
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
Included are drivers for buttons, backlight, lcd, audio and storage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
Not all keymaps are completed, but I want to get some initial work I did
under version control.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28442 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also make exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex() introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases rb->default_event_handler_ex() was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27873 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also it makes exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases it was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27862 a1c6a512-1295-4272-9138-f99709370657
Print current rockbox uptime when the plugin was started
Make some lines start with '#' so they are not plotted by gnuplot
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27339 a1c6a512-1295-4272-9138-f99709370657
gnuplot will ignore lines which begin with '#'
Split a line so the output will fit in 80 columns
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26430 a1c6a512-1295-4272-9138-f99709370657
It's now easier to force rebuild of files depending on the svn revision
version.c/version.h are generated once with new tools/genversion.sh
Changes in the VCS are still not auto detected, so you'll have to remove
builddir/version.* if you want to change the string in your binaries
APPSVERSION is now called RBVERSION and is defined in the generated
header instead of being defined by the Makefiles
appsversion is now called rbversion (the plugin api number didn't change
since old modules are still binary compatible)
Change some bootloaders to use knwon-at-buildtime RBVERSION instead of
"%s" + rbversion
You'll need to run make clean to regenerate dependencies after the
removal of apps/version.h
To build binaries with a different version string, hand-edit
tools/version.sh or tools/genversion.sh (which calls the former)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26320 a1c6a512-1295-4272-9138-f99709370657
