Use %x9(id) to draw an image in the whole current viewport using the
9 segment drawer (which draws the corners as normal and *tiles*
the middle segments to the needed width/height).
Future work is to make it scale instead of tile
Change-Id: Ic3ed1cad93f96091694801eb442e0da5a2401203
Our current PS and RT parser is very strict: it requires
all segments to be received in order. This is too strong
of an assumption even when the reception in good, particularly
for long RT messages. This parser handles segments in any order
and completes a message only when all segments are present. To
avoid keeping obsolete segments, each segment has an associated
timeout and is trashed if not updated for a certain period.
Change-Id: I79841bb5ab1f838c7702d8281044e226f6510199
Reviewed-on: http://gerrit.rockbox.org/237
Tested-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!
Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
This change is motivated by the ATA specs, section 9.2 Software reset protocol
(quote):
A host should issue an IDENTIFY DEVICE and/or IDENTIFY PACKET DEVICE
command after the software reset protocol has completed to determine the
current status of features implemented by the device(s).
This indeed fixes a local issue with an SSD in an iriver h320. No other tests
were carried out.
Change-Id: I191444aec3e55f6890020f601c715d0022d09fb6
Reviewed-on: http://gerrit.rockbox.org/218
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Linus Nielsen Feltzing <linus@haxx.se>
Reviewed-by: Peter D'Hoye <peter.dhoye@gmail.com>
Tested-by: Peter D'Hoye <peter.dhoye@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
As far as I can say only one file is affected. The loops needs to
go one more time since the end pointer is on the last pixel, not
beyond it.
Change-Id: Ie629138f8399b927bef7bad3847ef42db37e2fed
It was only needed by the old arm toolchain that we no longer use or support.
Change-Id: Id0e6c67477f8834a637079b03cde5fbf9da68b1c
Reviewed-on: http://gerrit.rockbox.org/233
Reviewed-by: Nils Wallménius <nils@rockbox.org>
We use unsigned long/long in number of places in fat.c. When this
is used to cast 32bit fat field it fails on 64bit systems.
This patch introduces explicit types (uint16_t, uint32_t) only
in places which influence how fat structures are interpreted.
Change-Id: I0be44d0b355f9de20b4deb221698d095f55d4bde
Reviewed-on: http://gerrit.rockbox.org/232
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Reviewed-by: Torne Wuff <torne@wolfpuppy.org.uk>
%dr(x, y, width, height, [colour1[, colour2]]):
x,y - viewport relative pixel coordinates to start the rectangle.
width, height - obvious. can be '-' to fill the viewport
if both colours are left out the viewports foreground colour will be used
if one colour is specified it will fill the rectangle that colour.
if both colours are specified it will gradient fill the rectangle.
Change-Id: Iad451e99ded663bc7c5d182443659db7d909b388
lcd_gradient_rect() was only usable to draw list lines, so split
it up and make a generic gradient draw function available to apps/
Change-Id: I665911a90fef239b5e06592ea2763cbeeb74c83f
The framebuffer the lcd driver uses can now be changed on the fly
which means that regular lcd_* drawing functions can draw onto the
"backdrop" buffer. The skin engine can use this to create layered
effects.
Add the tag %VB to a viewport to draw that viewport onto the
backdrop layer. If you want to draw an image onto the backdrop
framebuffer use %x(backdrop filename) instead of %X() inside
a viewport with %VB.
Change-Id: I741498e2af6d4f2d78932cabe8942317893e7cfc
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
Remove direct calls to tuner_power(...) in apps/ and let
the driver manage tuner power with the RADIO_SLEEP setting.
Change-Id: I37cd0472e60db5d666dae1b9fe4755dd65c03edd
Reviewed-on: http://gerrit.rockbox.org/84
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The headphone volume register value reads differently in Line1 and DAC mode.
Since the volume is not set again when switching between playback and radio,
we need to remember the hp volume and reapply setting when changing the mode.
Change-Id: I8fbd344f78653c19d81a39dd3f680ec6885cb1ec
Use two stage amplification (PGA gain and digital stage gain)
combined to extend recgain range to -17.25 +60.0dB.
Change-Id: I4df8af801730b7efb2d35096de077ba31d331222
move prototypes to ascodec.h
move code to ascodec*.c
YPR0: use adc-as3514.c instead of duplicating it
TODO: merge as3514.h and ascodec.h ?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31626 a1c6a512-1295-4272-9138-f99709370657
It failed to restore macsr to the expected default (FRAC/SAT) which caused DSP
functions like tone control filter calculation to fail (resulting in noise).
The FFT plugin was also affected.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31589 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
