Scrollstrip works as quadrature encoder. We set pin change
interrupt for both edges of signal both lines and sample the state
in ISR. From time to time the sequence is out-of-sync which was
properly detected but erroneously handled leaving scrollstip
interrupts disabled.
Change-Id: I08e4f99c6c27df0f8180aa16e6e1d9e4203bafa7
Reviewed-on: http://gerrit.rockbox.org/782
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Tested: Marcin Bukat <marcin.bukat@gmail.com>
This patch completes the plugin keymaps for the Zen X-Fi3 and enables those plugins for compilation.
One key was changed in "button-target.h" for compatibility with Rockboy.
This also caused the changes to "keymap-zenxfi3.c", to keep the stock functionality (no further changes in here).
Change-Id: Ic222faf89e9a9a2332a49d6e532cedb6eb16d3d7
Reviewed-on: http://gerrit.rockbox.org/762
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Apart from the fact that the original settings were much
to sensitive for my taste, they are now easier configurable.
Change-Id: If1772367fc1f34fa1255f57b1831d1f33dc34558
Reviewed-on: http://gerrit.rockbox.org/772
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Before, the Cypress chip power is always turn on either from internal battery
or from usb host. In this regard, the internal battery energy was spend on the
inactive chip. Now power of the Cypress chip is enabled only on the external usb host.
Change-Id: Iae7cddd1237ea9ed93fee5404575cc01543cb00c
Reviewed-on: http://gerrit.rockbox.org/433
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Defining HAVE_BUTTON_DATA without simultaneously defining HAVE_TOUCHSCREEN
caused compile errors. (I need them separated for a scrollstrip driver.)
Change-Id: I945d3437d840035ccc0c147f8155029b403c6ec2
Reviewed-on: http://gerrit.rockbox.org/771
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The build system needed fixes because the tools paths changed and one tool that
we used (apkbuilder) was removed entirely. Recent NDKs don't ship gcc 4.4.3
anymore, therefore switch to 4.6. The code itself needed a fix for a jni
reference bug that was uncovered by KitKat.
The port now builds with latest sdk (r22) and ndk (r9d).
Change-Id: Id74fa54ba93bbb0ee30373fbe79e92c5ff03201d
For some reason the power subsystem needs to know the relationship between
the VDD{D,A,IO} and uses a weird register to do so.
Change-Id: I7fcc75f6cc0460b4997914986deda7ca544a4940
Contrary to the imx233, the stmp37xx lcdif doesn't know how to properly
recover from underflow and things are worse because of the errata which
makes the lcdif not clear the fifo. Workaround this by detecting underflow
and taking action: stop dotclk mode (will clear fifo) and schedule next frame.
The dma transfers now write the ctrl register as part of the PIO writes,
making the code simpler.
Change-Id: I15abc24567f322cd03bf2ef7903094f7f0178427
Implement scanning as binary tree in array.
Make the ADC calls fewer without compromising read quality.
Declare the thread function as 'noreturn' to save some stack. Reduce
stack size (regardless, % use is now a bit lower).
Change-Id: I239792fd2a0a2c019d1ec4af1d6d4b466cdf0ef5
I must have been blind and copied some intermediate file
instead of final version. No functional change, only fixes.
Change-Id: Icaa868225517662c88f8492b1f04808407853361
No code changed, just shuffling stuff around. This should make it easier to
build only select parts kernel and use different implementations.
Change-Id: Ie1f00f93008833ce38419d760afd70062c5e22b5
1) Avoid load/store delay slot by reorganizing instructions
in copy loops
2) Fix off-by-one error in cache initialization code.
This was harmless as it simply set line0 twice, now it sets
every cacheline only once.
3) Fix off-by-word error in .bss clearing loop.
The addiu in branch delay slot even if calculated is not seen
by the branch instruction itself, so the code did one word
too much in clearing.
4) Fix off-by-word error in deadbeefing stack.
See above.
Change-Id: Iabb09a55979de7aa2e2b9234273683fc7e9762c5
A thread polls the appropriate GPIO pin for sd card presence and mounts
using the mount system call.
Change-Id: I31ab41c4120f4af64eb6998b7e7b6f9051585efb
Part of this change is to align sdlapp builds to other application targets
in that the sim_* wrappers are not used anymore (except for sim_read/write).
Path mangling is now done in rbpaths.c as well.
Change-Id: I9726da73b50a83d9e1a1840288de16ec01ea029d
The virtual external storage can be inserted/extracted with the e key. This
has little effect because there is no way to access the storage (yet, a later
commit will change this). Except on ondio where the mmc needs to be
extracted before entering USB (like on real target).
Change-Id: I523402832f3b4ae71e0603b281aba4fb8592a897
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).
SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).
Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
This driver will subsume the old button-lradc driver and support far more
options. It can sense LRADC channels, PSWITCH, GPIOs and it handles special
"buttons" like headphone insertion and hold detection. It also provides a
more natural description of the buttons using a target-defined table with some
macros to make it easy to read and write. It uniformely handles debouncing on
LRADC channels and PSWITCH.
Change-Id: Ie61d1f593fdcf3bd456ba1d53a1fd784286834ce
On some OSes like Windows or if running in a virtual machine, the one second
timeout might be too short.
Change-Id: I717f7a2aaed1cb3d40e8fbe6f9b1081b43ceea95
Original fix by Marcin: it had a problem because crt0 on imx233 is more
complicated than many targets: since we use virtual memory, we first disable
the MMU, then move the entire image (including init and itext stuff), then
setup a temporary stack to setup the MMU. Only when the MMU is enabled, can
we move the init and itext stuff to its right location and finally boot.
This requires some trickery because:
- the initial move copies everything, including init and itext
- the stack overlaps with init and itext to reclaim space
- the temporary stack cannot be the same as the main stack to avoid trashing
the init and itext code, also it needs to be a physical address
Change-Id: Ibaf331c7d90b61f99225d93c9e621eb0f3f8f2dc
