- PCM playback DMA doesn't need the discard. Only recording DMA would
need it.
- When creating threads for another core, the core creating the thread only
needs to commit. The discard on the other core is handled elsewhere.
Change-Id: I864a0777e22f221a66218efd2c02ff3ad3889736
The headphone volume register value reads differently in Line1 and DAC mode.
Since the volume is not set again when switching between playback and radio,
we need to remember the hp volume and reapply setting when changing the mode.
Change-Id: I8fbd344f78653c19d81a39dd3f680ec6885cb1ec
We neet to setup the XPD to work as GPIO
storage unaffected
Tested on working-already Clipv2 and on a 'brickable' clipv2
Change-Id: Idcbdfb6bd50d51b7f6f7e00b21df24fac9b3a6d8
Now lcd_framebuffer is the only framebuffer in the system. We still use a ARM-buffered buffer
which serve as an intermediate buffer for copying, to accomodate the requirement of the controller.
We implement lcd_update_rect() properly using this new scheme (this requires two little quirks),
this allows to implement lcd_blit_yuv with the right semantic (bypasses the framebuffer). YUV to RGB
conversion is still done in software but the DCP CSC should be able to do that but the hardware rotation
scheme is not the same as our software so it will require some tricks.
Change-Id: I0752e9c2f1a705d2e6a6010084e1f150965d8370
This dir is suitable for stuff that doesn't fit the target tree, e.g. because
it also builds on hosted or otherwise. It also has a generic subfolder for
fallback C implementations so that not all archs need to provide asm files.
SOURCES should only contain "foo.c" where foo.c includes the specific
<arch>/foo.c files from the subdirs using the preprocessor. This way automatic
selection of asm versions or generic C verion is possible.
For the start, the thread support files are moved, since ASM threads can
be used on hosted platforms as well. Since core_sleep() remains platform
specific it's moved to the corresponding system.h headers.
Change-Id: Iebff272f3407a6eaafeb7656ceb0ae9eca3f7cb9
Core, codecs and plugins link it separately so this gets rid of SOURCES trickery.
Don't build it for hosted targets.
Change-Id: If15ef90e93cd218a4352ae8e89eea95d3122452f
Mostly for the sake of reducing latency for audio servicing where other service
routines can take a long time to complete, leading to occasional drops of a
few samples, especially in recording, where they are fairly frequent.
One mystery that remains is GPIOA IRQ being interrupted causes strange
undefined instruction exceptions, most easily produced on my Fuze V2 with a
scrollwheel. Making GPIOA the top ISR for now, thus not interruptible, cures it.
SVC mode is used during the actual calls. Hopefully the SVC stack size is
sufficient. Prologue and epilogue code only uses the IRQ stack and is large
enough.
Any routine code that should not be interrupted should disable IRQ itself from
here on in.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31642 a1c6a512-1295-4272-9138-f99709370657
move prototypes to ascodec.h
move code to ascodec*.c
YPR0: use adc-as3514.c instead of duplicating it
TODO: merge as3514.h and ascodec.h ?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31626 a1c6a512-1295-4272-9138-f99709370657
move adc_close() prototype to adc.h
don't duplicate prototypes of adc.h
remove license header and guards for a single include of another file or for empty content
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31623 a1c6a512-1295-4272-9138-f99709370657
implement button_init_device for ondio
include button.h to get prototypes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31621 a1c6a512-1295-4272-9138-f99709370657
Only target-specific (list of SPI targets) go in spi-target.h
API go into spi.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31615 a1c6a512-1295-4272-9138-f99709370657
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Enabled a PMIC event where it should be disabled. Used constant from wrong enum
to get sense bits (??) which messed up main charger detection.
Also remove an obsolete struct declaration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31536 a1c6a512-1295-4272-9138-f99709370657
Dispense with "pmic" thread and process PMIC events directly within ISR. Add
sense bit reading as part of the handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31528 a1c6a512-1295-4272-9138-f99709370657
In lcd_power_on(), R_DRV_OUTPUT_CONTROL and R_GATE_SCAN_START_POS are now
initialized like in lcd_set_flip(), so the display wakes up properly when it
is supposed to be upside down.
Thanks to Neil Sharrow for reporting the problem and testing the patch.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31514 a1c6a512-1295-4272-9138-f99709370657
Synchronous cable read is still required because the timing of the receipt of
the cable event cannot be known for sure-- basically it introduced a thread
race between main and pmic. If a keypress is desired instead to enter BL USB
mode a la AS3525, then it's possible to remove that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31510 a1c6a512-1295-4272-9138-f99709370657
as3525v2 specific part is 400 LoC, ipod specific less than 300
(comments and whitespace included)
TODO: merge properly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31509 a1c6a512-1295-4272-9138-f99709370657
