Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Instead of checking ticks, set a sticky dirty flag that indicates
that the RTC needs to be read. This gives a timely update and more
accurate readout without actually reading the RTC until it changes.
The implementation should atomically read the flag and clear it.
Setting the flag would typically happen in an RTC tick ISR.
Change-Id: I6fd325f22845029a485c502c884812d3676026ea
Some drivers set tm_wday just fine and do not need it coerced to
be correct. Others set tm_yday, so don't overwrite what the driver
sets; just zero it inside if it can't fill the field. Move calls
to set_day_of_week() to the sorts of drivers that presumably
required the hammer (FS#11814) in get_time() where the weekday
isn't locked to the date.
Change-Id: Idd0ded6bfc9d9f48fcc1a6074068164c42fcf24a
NOTE: this commit does not introduce any change, ideally even the binary should
be almost the same. I checked the disassembly by hand and there are only a few
differences here and there, mostly the compiler decides to compile very close
expressions slightly differently. I tried to run the new code on several targets
to make sure and saw no difference.
The major syntax changes of the new headers are as follows:
- BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once:
BF_WR(reg, field1(value1), field2(value2), ...)
- BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW
- there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply
BF_WR with field_V(name)
- the old BF_SETV macro has no trivial equivalent and is replaced with its
its equivalent for BF_WR(reg_SET, ...)
I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the
redundant "regs".
Final note: the registers were generated using the following command:
./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml
Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
It will be out of scope once the function is left.
cppcheck reported:
[firmware/drivers/rtc/rtc_zenvisionm.c:31]: (error) Pointer to local array variable returned.
[firmware/drivers/rtc/rtc_zenvisionm.c:38]: (error) Pointer to local array variable returned.
Change-Id: Ibf28ba9b3d20cadcaff22398e143488c86746660
This adds the application part of alarm wake up. On some targets
like the Fuze+, it will also require a bootloader change to make
sure that the device doesn't power down on alarm wake up (for
example on the Fuze+ the bootloader requires the power button to
be hold sufficiently long, thus preventing alarm wake up to work)
Change-Id: I5d01957852355fddbd48110d3d75a5533f07879e
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
The wakeup alarm will be disabled when powering off anyway
OF database refresh of µSD now only happens if the wakeup was
explicitely enabled
There still seems to be a freeze problem when powering off (sometimes)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26875 a1c6a512-1295-4272-9138-f99709370657
If we disable the hearbeat source after enabling the watchdog there's no
more lock-up when powering off the dap
Comment out alarm enabling on startup since rockbox disables the alarm anyway
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26247 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
Change the RTC drivers so that the rtc_(read|write)_datetime functions now deal directly with the tm struct instead of passing a string of bcd digits to/from (set|get)_time .
This simplifies drivers for rtc's that do not use a bcd representation internally and cleans up some target specific code and #ifdefs in generic code. Implement simple stubs for the sim to avoid #ifdefing for that too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22839 a1c6a512-1295-4272-9138-f99709370657