talk_value is just talk_value_decimal with 0 decimals
lets add the extended function instead
static inline int talk_val(long n, int unit, bool enqueue)
{
#define NODECIMALS 0
return rb->talk_value_decimal(n, unit, NODECIMALS, enqueue);
}
Change-Id: Iaba3d2f95785f2e1855e294ccf099a977bb6cb20
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
Depending on the length of the values to display having both entry title and
value in the same line can be hard to read if the display isn't wide enough.
Similar to the metadata view use two lines for each entry.
Change-Id: I9a2dfe78e02b0460add1681115b0c4781d74af17
Use unsigned type for file sizes (some directory/file structures should be changed too)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31449 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
Our printf format doesn't support "ll", restore the cast to long
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27931 a1c6a512-1295-4272-9138-f99709370657
use lcd_putsf()
remove filesize2string, instead get the "logarithm" (rounded towards
zero) and use the this value to compute the size displayed and the
unit prefix (nothing/k/m/g)
also use struct initializer in dir_properties()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27923 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also make exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex() introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases rb->default_event_handler_ex() was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27873 a1c6a512-1295-4272-9138-f99709370657
It handles exit() properly, calling the handler also when the plugin returns
normally (also it makes exit() more standard compliant while at it).
It also holds PLUGIN_HEADER, so that it doesn't need to be in each plugin anymore.
To work better together with callbacks passed to rb->default_event_handler_ex introduce exit_on_usb() which will call the exit handler before showing the usb screen and exit() after it.
In most cases it was passed a callback which was manually called at all other return points. This can now be done via atexit().
In future plugin_crt0.c could also handle clearing bss, initializing iram and more.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27862 a1c6a512-1295-4272-9138-f99709370657
* Move strncpy() from core to the pluginlib
* Introduce strlcpy() and use that instead in most places (use memcpy in a few) in core and some plugins
* Drop strncpy() from the codec api as no codec used it
* Bump codec and plugin api versions
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21863 a1c6a512-1295-4272-9138-f99709370657
struct plugin_api *rb is declared in PLUGIN_HEADER, and pointed to by
__header.api
the loader uses this pointer to initialize rb before calling entry_point
entry_point is no longer passed a pointer to the plugin API
all plugins, and pluginlib functions, are modified to refer to the
global rb
pluginlib functions which only served to copy the API pointer are
removed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19776 a1c6a512-1295-4272-9138-f99709370657
* Remove gui_splash()
* Rename gui_syncsplash() to splashf() and remove its voice
capabilities.
* Rename the internal splash() to splash_internal() and introduce an
externally visible splash() that handles simple splashing without
printf functionality e.g. splash(HZ, ID2P(LANG_FOO)); or splash(HZ,
"foo"); if a LANG_* id is passed it will be voiced.
* Adjust all places that called gui_syncsplash() to use the correct
variant from above.
* Export both new functions to plugins and adjust places calling
rb->splash() to use the correct variant so that we now have naming
consistency between the core and plugins.
* Fix one latent bug that would cause my sim to crash with the above
changes and correct P2STR and P2ID macros, thanks to pondlife.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18282 a1c6a512-1295-4272-9138-f99709370657
Now returns true if the action was handled in that function instead of returning the handled action.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14733 a1c6a512-1295-4272-9138-f99709370657
When displaying the properties of a file, attempt to get metadata from it and
on success, display the artist, title and album strings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14328 a1c6a512-1295-4272-9138-f99709370657
Fixes problems with targets where the ACTION_STD_CANCEL event is a combo
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13956 a1c6a512-1295-4272-9138-f99709370657
