The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This reverts commit 462adf2a0f.
Leaving the card in TRAN results in a huge power consumption because some cards
and internal bridges do not automatically enter power saving mode in TRAN state.
Change-Id: If79efe8cf99b24174889b3a5ebbcb51b07085f58
The ZEN/ZEN-XFi seem to be very picky about the lcd. And they do not like
standby mode so I'm going to drop it, the OF doesn't use it anyway. I still
don't know what this "power" pin is about, obviously it's not real power but
the OF toggle it. Let's hope the lcd will finally become more stable with
fix: the driver now does full power on/off on enable/disable.
Change-Id: I1c465ee4f2462bc3d9507e5f575f0a181af60214
Choices are limited for those: i2c is either generic software or imx233
hardware and power is either none or with a gpio. So factor ever possible
combination in a single common file and use fmradio-target.h to supply the
required parameters. This will remove a bunch of duplicate code.
Change-Id: If12faeb2e371631cd39cc18a4c1d859812007934
The old code allowed each target to specify its adc targets but this proved
useless since the target rely directly on imx233/lradc for input method and
generic adc is mostly used for battery and debug. Remove all target specific
files and provide a generic implemenation. The targets can still specify a
battery temperature channel in powermgmt-target.h
Change-Id: I68cf2e3e46379d174ac6d774ffb237bb15a19ae3
Although there is no difference in the cost of a full or partial update,
it is preferable that the semantic of lcd_update_rect() be correct.
Change-Id: I8a168388b98e0dbd7237729b7fd8a62fa1885be1
The previous code disabled the irq when there were fired. This seems
unreliable for some mysterious reason. Instead simply disable them
before enabling the irq.
Change-Id: I7ee1aa25dbc41c7dd53aa7c7744aa5e4d70ff2d8
Reviewed-on: http://gerrit.rockbox.org/640
Reviewed-by: benjamin brown <foolshperson@gmail.com>
Tested-by: benjamin brown <foolshperson@gmail.com>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code was broken in two ways:
- it called storage_read_sectors with a wrong drive number
- calling storage_read_sectors too early at boot time will fail because
we are in the init function, so the drive is not yet registered.
To fix this, use a user provided read callback instead of storage read
functions.
Change-Id: I5ab79d48391fae619d5f8ae09c3d499fc43854c8
The setting is currently unused but it provides some documentation and basic
support for a more comprehensive implementation of read-only support.
Change-Id: I353c33ef765ef6e6c09d59e943da6654a311ad84
The exact combination on which recording is needed is too complicated, so
just always cancel the unused warning, the compiler will optimise it away.
Change-Id: I0946586e4b01769c98babc4616f893c38f44c05f
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
When bootloader is too intelligent, like on Creative devices, it might leave
some unexpected IRQs sources on, this is problematic when those sources share
the same IRQ line.
Change-Id: Ie9333918eb1048b1f2de4ea738cddf556aa75ee2
The STMP3700 has unreliable vbusvalid irq so we need to use
vdd5gtvddio. Therefore, using the vbusvalid bit produces
inconsistent results between events and detect. Fix that
by making power handle all the usb detect stuff.
Change-Id: Ic521b2f6677602e184fe46352c5359f4b4ba8d56
These functions are mostly used by the radio drivers and any blocking
call could potentially block the entire UI, which is pretty bad.
Since any request is expected to finish within a few us, having a 10ms
timeout doesn't seem unreasonable.
Change-Id: I03b19729511547e5bbdeb3476d020e5d87d0d7e1
On targets like stmp3700, resetting the dma channel on "soft" timeout
drives the whole block crazy unless it goes through complete reset.
Change-Id: I830b252279989bf9f9cd9c138240a6ea9b003527
