The viewport used for the scrollbar is allocated on the stack, and falls
out of scope before the next call to set_viewport(), which sets a flag
in the now-out-of-scope "last" viewport.
Change-Id: I2c8bfcff500d189fa3857411aadc2e16aa545d2c
- Proper error codes are now returned from all functions. These codes will
be used by a host-side flash tool for error reporting.
- nand_erase_block() was replaced by nand_erase_bytes(). The caller can't
know how big an eraseblock is with the current API, so next best thing
is to verify the correct alignment inside the call and reject the erase
if it isn't properly aligned.
- Fixed typo in nandcmd_block_erase() which would cause an SFC error to be
interpreted as success. Yikes.
Change-Id: Id4ac9b44fa7fc2fcb81ff19ba730df78457c0383
Tested on ErosQ
Added a setting in the Advanced Softlock menu to always
have autolock on, rather than having to "arm" it with the
softlock button. Lock/Unlock still works the same with
this on, but when the screen turns off, the device always
ends up in the locked state. Requires Autolock On to be
set as well, and the normal Autolock functionality is
unchanged with this off.
Caveat: the power/softlock button must be pressed
at least once after powering on the device or enabling the
feature. After that, it should consistently always "arm"
the autolock.
Added feature to manual in
manual/configure_rockbox/system_options.tex. Also updated
some labels I had changed in the Advanced Key Lock menu
and added information for Disable All Lock Notifications
in a previous commit. Shared items also updated in
manual/configure_rockbox/display_options.tex for selective
backlight.
Change-Id: I09dc6814bee803e40c7088157e1fe9d01d5f3474
Ensure the default setting reflects what the service manual says the
official battery capacity is. Change the ranges to reflect what
replacement batteries are actually available.
This range is actually much shorter in reality due to these units
requiring the rarer 3 pin battery type that uses a thermistor. As such
there's only one real replacement battery for each.
So the HDD1630 caps out around 700 mah while the HDD6330 caps out around
680 mah.
Change-Id: I2dbbba83ad2cd6e1d84e3481c4af84a06c45e16b
Will allow the QuickScreen to be accessed in the playlist catalogue
and when editing a playlist using the playlist viewer.
Change-Id: I4b7108db6384eb2077ffdccb2992f2e51a39f42f
headphone ADC thread stack was slightly too small. Bump it up a bit.
(it was _perfectly_ sized for the prior older toolchain+optimization flags...)
Change-Id: I2ca67c2b85c54f879892a31e281d7696f893389c
Instead of 'ifdef ENABLEPLUGINS' (which always gets set) use
'ifeq(yes,$(ENABLEPLUGINS))' which means any value other than 'yes' is
treated as a negative.
Change-Id: I6c92eef5565328f1bb9f64a4d379dec697354224
Use of IF_COP_CORE was mistakenly introduced as part of 89acde6af2,
effectively short-circuiting multiple tests resulting in the code
paths always being executed, on both cores.
Use the correct macro, so per-CPU paths are handled properly.
Change-Id: Id346cf759fc1b06b7d56694d7af1f469caf785a4
This appears to finally fix the issue
turns out the status register we were writing was only for the CPU
COP cache flush wiped out the CPU cache
--
Added some defines to cut down on the magic numbers
Added some comments explaining such
Set the address to full 20 bit address
0x1FFFFF which is then left shifted 11 internally -- somewhere around 4GB?
Link explains the cache status bits
https://daniel.haxx.se/sansa/memory_controller.txt
Change-Id: I57b7187c2f71a5b54ce145bf3a21ed492a8993cb
Note: It's marked as 'unusable' right now, so it won't show up
on build.rockbox.org, nor will daily & voice files be
created.
Change-Id: I5ea133477a6b4c0296c46757d0375994ad812cc5
Enable its use in the jz47xx MIPS targets.
(accidently committed g#3249 before making these changes)
Change-Id: I1791946f632901f0c7a94b04b009671aa0d71717
This is just a minor cleanup of Solomon Peachy's code, and using
per-filesystem buffers instead of a single static buffer.
Tested and working on the FiiO M3K.
Change-Id: I3c19e8cc24e2f8aa07668c9d1c6d63364815050a
Text entry keymap was almost completely backwards, and it was
impossible to submit without adding one last character.
Change-Id: I40a224fe20e228c5e4670dd6583318918c59c827
This uses the new unicode string literal feature that is available
now to greatly simplify the initialization of these special string
types. This makes them much more readable at a quick glance.
Change-Id: Iad8b49aa763486608e3bb7e83fb8abfb48ce0a7b
-- apparenty 0x4 aligned doesn't work properly
requires 0x8 alignment at least for the h10 20gb
but enabled for all processors that define MEM_ALIGN_ATTR
Change-Id: I11edaab183b91a6d158f1f439f173b9b699dc914
-- apparenty 0x4 aligned doesn't work properly
requires 0x8 alignment at least for the h10 20gb
but enabled for all arm processors
assign the default framebuffer to the default_vp as well
Change-Id: I0b76c30f2ddb5d6d2f7c6a132e4081aee58da17b
The function to check whether a playlist has been modified
will now only try to resume a playlist, if the global resume index
is not -1.
This also means that replacing a finished (modified) playlist will not
produce a warning anymore if Rockbox has been restarted in
between. In that respect, the behavior is identical to
what it was *before* 46085c8978.
Change-Id: Ib95f89043274f1c72c75023d1506fc093aaf4cf9
In the old position of the call, the first battery reading would
be made before initializing the target's power management code.
If the target needs to initialize before giving a battery reading,
then the first reading would be wrong and the power thread might
inappropriately shut down based on a false zero reading.
The new position avoids forcing special-case logic onto the target
power management code.
Change-Id: I483cfabe30c6881d80a1094fd526fa0065523d19
Tested on erosq
Added ability to disable all softlock notifications. Setting is
"Disable All Lock Notifications" under Advanced Key Lock
Settings.
Tested to make sure it doesn't interfere with backlight
exemptions, keylock exemptions, or first press enables backlight
only. When enabled, this overrules the existing Disable Notify
setting, which only disables the reminders when a button is
pressed while the device is already locked.
Also changed phrases in the Advanced Key Lock settings menu
to make it more obvious what the options do. Changed
LANG_ACTION_PLAY, LANG_ACTION_SEEK, and LANG_ACTION_SKIP from
"[button]" to "Exempt [button]". These language changes will
also affect the Backlight Exemptions list, but the wording
should be appropriate there as well.
Added LANG_SOFTLOCK_DISABLE_ALL_NOTIFY and LANG_ACTION_VOLUME,
changed LANG_VOLUME to LANG_ACTION_VOLUME in display_menu.c
for consistency.
Change-Id: I914fe154ba5d508a842165aea7c7755e4e6b9c57
According to the ATA specification this bit is used to indicate
either an ATA device or a CF compatible card. We use it currently
to indicate CF compatible status. So let's change the wording
accordingly.
Change-Id: Iee87197dee80e6225e4c62c40bceedfbc4e659c2
This allows the user to make use of the DAC's power-saving abilities.
The two modes are "high performance" and "battery saver". This feature
is supported by the AK4376 DAC in the upcoming FiiO M3K port.
The setting is only a manual toggle right now, but in the future it
could be hooked up to the battery level (via another setting) so it
can be toggled automatically when the battery gets too low.
Change-Id: I482af6e2f969fcbdeb3411bd3ff91f866b12d027
This reports the ATA device type bits in a human readable format
so that users can easily identify what their ATA device is claiming
to be. This is mainly useful for troubleshooting a possible source
of compatibility issues with their DAP. As such this is mainly an aid
to CF modders.
Change-Id: I40f581fc0805a2753789452373cc6e179d8f3074
