Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'
Time is auto-ranged dependent on value
Adds talk_time_intervals to allow time values to be spoken similar to
display format: x Hours, x Minutes, x Seconds, x Milliseconds
Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile
RTL Languages ARE supported
Negative values ARE supported
Backlight on/off are now Always and Never to share formatter with LCD
Timeout
Added flag to allow ranged units to be locked to a minimum index
Added flag to allow leading zero to be supressed from the largest unit
merged talk_time_unit() and talk_time_intervals()
optimized time_split()
optimized format_time_auto()
Backlight time-out list same as original
Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
Selective backlight allows the user to choose actions that will not
enable the backlight when pressed.
Advanced softlock allows user to choose actions that will not be
blocked by screenlock on devices without a hold button.
Both only occur in FM and WPS Contexts.
Update:
Back from the dead
-Cleaned up code, removed unnecessary calls, re-arranged last filter action
timeout conditional to work in case last_filtered_action_tick was never set
-Added entries to the manual
-Fixed back button on some menus not activating backlight
-Made menus more intuitive, no actions selected now changes menu item to off.
-Added talk fuctionality.
-Added option to disable selective backlight while on external power.
-Rewrote backlight and softlock handling code to fix issue with scrollwheels
-Menu changed to have toggle(yes/no) and settings
-Optimized selective actions lookup
-Added option to disable notification of 'buttons locked' while softlocked
-Removed uneeded code, consolidated action lookup to single function
-Fixed incorrect name on selective softlock menu
-Added option to disable touch on touchscreen devices
-Fixed backlight on original screenlock without selective screenlock active
-Added text selection in mask_select for when show_icons is off
-Fixed voice in mask_select to speak if voice is defined instead of spelling
-Added more lang defines (play skip seek)
-Added option to disable unknown keys turning on backlight
-Fixed Conditional argument In wrong place causing players without
backlight to fail to build
-Fixed Disable Unknown blocking detection of context change
-Fixed canceling menu didn't update new settings
-Added Autolock on backlight off
-Removed backlight_on_force from backlight.c, Now sets ignore next to false
and uses backlight_on
-Cleaned up autolock code added strings to lang file
-Fixed issue where rapid presses would bypass softlock
-Removed old softlock code, Cleaned selective actions code
-Changed menu to match existing RB menus
-Fixed Backlight_on_Hold blocked by backlight_ignore_next
-Fixed ignore_next for ipod
-Fixed bug allowing context with softlock to bypass selective backlight
-Changed mask_select to no longer prompt for changes to be saved
-Changed menu names
-Added ignore timeout to allow ipod scroll wheel to work properly and other
players to still work properly, removed some previous code including
ignore_event
-Increased ignore timeout to prevent sd card accesses from interrupting action
code and turning on backlight
-Changed Unknown action to unmapped action in menu, changed handling code
-Removed unneeded logic and variables for handling unfiltered actions
-Reverted unmapped action code to previous functionality
-Added manual entries (thanks JohnB)
-Removed elusive unhandled unicode character from manual, changed formatting slightly
Actions:
Volume,Play,Seek,Skip
Extras:
Disable unmapped actions
Disable selective backlight on external power
Disable touch during softlock on touchscreen devices
Disable softlock notifications (power button still notifies)
Autolock on backlight off
Method:
Adds a function to ignore backlight on next call
If selected action occurs backlight is forced on,
Filter_first_keypress stays intact.
Selective softlock allows selected actions through, bypasses the normal
softlock routine.
ToDo:
DONE
previous commit (#1) has attribution for folder_select.c which mask_select
is based from.
Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
Instead of 3 cfg lines per eq band there is now a single line
for each:
<config name>: <cutoff/center freq>, <q>, <gain>
In addition, the config value names make a bit more sense.
The old settings are still readable but config.cfg and any new
settings files will be written with the new config values. (The
old settings will be removed completly sometime after the next
stable release).
Also a slight rework of the advanced EQ menu UI
Change-Id: I9008658d36ded442a5f2f825916df42a3934cbef
Reviewed-on: http://gerrit.rockbox.org/394
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
As well as using an index, which breaks when a file is added or
removed, use the crc32 of the filename. When the crc32 check passes the
index is used directly. When it fails, the slow path is taken checking
each file name in the playlist until the right crc is found. If that fails
the playlist is started from the beginning.
See http://www.rockbox.org/tracker/6411
Bump plugin API and nvram version numbers
Change-Id: I156f61a9f1ac428b4a682bc680379cb6b60b1b10
Reviewed-on: http://gerrit.rockbox.org/372
Tested-by: Jonathan Gordon <rockbox@jdgordon.info>
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Allows almost every available setting. (change the options in settings > general settings > quickscreen items)
Not every setting will work perfectly, some might need aditional handling if the change doesnt take effect straight away (let us know which are problematic so they can be fixed)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18984 a1c6a512-1295-4272-9138-f99709370657
If this commit causes problems with restarting playback open a bug report (getting testers was difficult...)
Settings which are stored in the nvram.bin file will be reset with this commit. this includes resume info, runtimes, "last screen" and a few others.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18555 a1c6a512-1295-4272-9138-f99709370657
wheel targets, clockwise is increase value
archos player, + is increase
button targets, up is increase
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15120 a1c6a512-1295-4272-9138-f99709370657
So in the mean time, set the MAX_FILETYPES to a huge value so we don't have to worry about this for a long while.
This build shold be safe to use again. If you downloaded a build after r14286 make sure you grab a new one
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14291 a1c6a512-1295-4272-9138-f99709370657
saves them in /.rockbox/recpresets.
also moves the default location for "write theme config" to /.rockbox/themes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13510 a1c6a512-1295-4272-9138-f99709370657
Remove apps/recording_settings_menu.c which should never have been
commited
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12293 a1c6a512-1295-4272-9138-f99709370657
(http://forums.rockbox.org/index.php?topic=8703.0 if I broke any of
those settings accidently).
* Add set_int_ex() which is the same as set_int() but adds a param which
is a callback that returns the voice ID to talk for the selected value
* Change the "pause on headphone unplug" to use meaningful strings in
the config instead of numbers, this setting will be reset.
* saves ~500bytes on the rec build :D
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12285 a1c6a512-1295-4272-9138-f99709370657
default, hopefully will give a small boost to saving and loading times.
Doing a manual save from "manage settings" > "write config" will save
every
setting.
Adds an option to save a cfg file from only the settings needed in a
theme .cfg (I may have missed some so let me know).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12172 a1c6a512-1295-4272-9138-f99709370657
Adds the LANG_ id for each setting to get them ready for the upcoming menu changes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12113 a1c6a512-1295-4272-9138-f99709370657
saving.
Added car_adapter_mode to the nvram settings, so nvram settings will be reset.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12101 a1c6a512-1295-4272-9138-f99709370657
