We know about two different bootroms. First can be found in rk2706A,
the second in rk2706B and rk2705. This two versions are very
similar but memory addresses are different. It seems it is possible
to distinguish bootrom version by reading SCU_ID register.
Change-Id: I01681b5e3a82930ae74a5cce6ab0244d7cd333d2
This change replaces an odd way to increment tea key in a function responsible
for finding the proper key (it doesn't have to be done in a for loop, it's just
adding a 32bit number to a 128bit number). It reduces the time needed to find
the key practically to zero and it gives in the best case 2 seconds of overall
speedup in loading the OF.
Change-Id: I0632526c3dfeb4d0603e77239f298a89076b630b
Reviewed-on: http://gerrit.rockbox.org/230
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
The freescale firmware partitions has a lots of quirks that
need to be dealt with, so do it the proper way.
Change-Id: I8a5bd3fb462a4df143bc6c931057f3ffedd4b3d3
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Synchronous cable read is still required because the timing of the receipt of
the cable event cannot be known for sure-- basically it introduced a thread
race between main and pmic. If a keypress is desired instead to enter BL USB
mode a la AS3525, then it's possible to remove that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31510 a1c6a512-1295-4272-9138-f99709370657
No need to define HAVE_BOOTLOADER_USB_MODE
That define might need some cleaning up
Fix FS#12384
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31241 a1c6a512-1295-4272-9138-f99709370657
Included are drivers for buttons, backlight, lcd, audio and storage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
This allows to directly draw generated and builtin images using lcd_bmp(bm_xxx);
Also fixes builtin list icons on non-mono targets, as they didn't have the
format field set.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30971 a1c6a512-1295-4272-9138-f99709370657
Probably not much of an error since it's in the bootloader :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30965 a1c6a512-1295-4272-9138-f99709370657
- now identity map dram uncached and have a cached and buffered virtual alias
- rework dma to handle virtual to physical pointers conversion
- fix lcd frame pointer
- implement usb detection properly
- implement bootloader usb properly
- allow the bootloader to disable MMC windowing (useful for recovery)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30432 a1c6a512-1295-4272-9138-f99709370657
Also support the e200 with this code. Apparently it's also possible to get the e200 in a state where .fmt files don't help.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30413 a1c6a512-1295-4272-9138-f99709370657
- make printf buffer static and local to printf()
- use '\0' instead of 0 for setting char
- remove unused dummy functions
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30117 a1c6a512-1295-4272-9138-f99709370657
In order to enable it, #define HAVE_DUALBOOT when building the bootloader.
Do not use the automatically created x5_fw.bin or m5_fw.bin, but use mkboot
to create a new firmware file from an OF x5_fw.bin resp. m5_fw.bin and
bootloader.bin.
The dual-boot bootloader boots the OF when pressing Play (main or remote) for
more than 3 seconds. Hold it a bit longer because the OF also checks buttons.
Short press boots rockbox.
As a bonus, the Play button read (for hold check) is done a bit earlier for
single-boot mode as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30018 a1c6a512-1295-4272-9138-f99709370657
Since the bootloader currently always fails at storage point (unimplemented), always enter touchpad debug screen and power off which pressing power button.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29859 a1c6a512-1295-4272-9138-f99709370657
