%dr(x, y, width, height, [colour1[, colour2]]):
x,y - viewport relative pixel coordinates to start the rectangle.
width, height - obvious. can be '-' to fill the viewport
if both colours are left out the viewports foreground colour will be used
if one colour is specified it will fill the rectangle that colour.
if both colours are specified it will gradient fill the rectangle.
Change-Id: Iad451e99ded663bc7c5d182443659db7d909b388
- fuze+ keymaps for calculator updated
- manual updated accordingly
- also correct a little problem with a line only used by mpio hd300
manual but that appears on all other target's manual.
Change-Id: I9c4d3c21dc6174079edbde8035bad318e09ec74a
Reviewed-on: http://gerrit.rockbox.org/125
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Added missing %T actions and %cs states.
Change-Id: Id7ec897c84141ac3d604e23b41e1138bbadc5c77
Reviewed-on: http://gerrit.rockbox.org/180
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Add the following actions to %Tp:
createbookmark create a new bookmark from the wps
listbookmarks list bookmarks from the wps
trackinfo show track info from the wps
My main motivation was to allow bookmarking and jumping around audio books
from the wps on touch enabled targets. You can do it now through the context
menu but it requires 4 screen presses instead of 1.
Change-Id: I1fa1bf0064dfd22b897eca7c56acc1ce8956f14c
Reviewed-on: http://gerrit.rockbox.org/171
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
The bootloader doesn't boot into the Original Firmware anymore since a while.
Remove the claim that Rockbox will always boot the OF on USB, and add a note
about older builds not providing USB support.
Change-Id: I44f37eeb849b522a2024eb26cee064e848bc4d17
Commit 1c1e1c0 replaced one \newline with a \\ which means starting a complete
new table row instead of keeping the linebreak within a cell, so put it back.
Change-Id: I6962ff8fe2d1f18bd3d85398a7373b3df0634c50
This commit change:
1) replace all keymaps with PLA ones.
2) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
3) do the required change to the manual in order to match
code's changes.
4) add a missing key in the manual and show them in a table
Change-Id: Ie983c7673c9dec1a9daeb34f5edaaa3c8be7dd5e
Reviewed-on: http://gerrit.rockbox.org/129
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This commit changes:
1) replace all keymaps with PLA ones.
2) do the required changes to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
Change-Id: I0cea909dd2ff44b8c5a2daba11c192965c4a02c7
Reviewed-on: http://gerrit.rockbox.org/131
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
This commit changes:
1) replace all keymaps with PLA ones.
2) do the required change to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
4) add the possibility to change values repeatily by holding key
pressed.
Change-Id: Ie68fd4e94830bba8a592941ee4e8b10aeacda923
Reviewed-on: http://gerrit.rockbox.org/127
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
this commit changes:
1) replace all keymaps with PLA ones.
2) do the required change to the manual in order to match
code's changes.
3) add an alternative exit button (PLA_EXIT or PLA_CANCEL)
Change-Id: I8a064b98c118e369f8464de5e43c7641d8a08e9e
Reviewed-on: http://gerrit.rockbox.org/130
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
The very vast majority doesn't have an underscore. There are a few
exceptions but there shouldn't be introduced even more.
Change-Id: I18d9bf86b5588f8a22a7a96d2dbea61fde4aba61
%x and %xl only require the id and filename now.
If you leave off the x,y it will default to 0,0.
If you want to use the default x,y you can still put in the
num_subimages param on the end (e.g %xl(a, file, 3) )
Change-Id: I8eff793dfdd037e302ace8deec9dc16dcea264a7
The framebuffer the lcd driver uses can now be changed on the fly
which means that regular lcd_* drawing functions can draw onto the
"backdrop" buffer. The skin engine can use this to create layered
effects.
Add the tag %VB to a viewport to draw that viewport onto the
backdrop layer. If you want to draw an image onto the backdrop
framebuffer use %x(backdrop filename) instead of %X() inside
a viewport with %VB.
Change-Id: I741498e2af6d4f2d78932cabe8942317893e7cfc
To change the shown menu items add the line "root_menu_order:<items>" into your config.cfg
<items> can be any of:
bookmarks, files, database, wps, settings, recording, radio, playlists, plugins, system_menu, shortcuts
Manual entry by Alexander Levin
Change-Id: Ie7f4bfb0f795184de094d05fc341a6cedd1c0cde
Reviewed-on: http://gerrit.rockbox.org/104
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
1) this patch replace all keymaps with PLA ones.
2) the patch also do the required change to the manual in order to match
code's changes.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL)
4) Also cut out the remote control related mapping as PLA handle remote controls
his own way so that we don't need them anymore
5) change scrollwheel mapping in order to have it controlling the value of selected field unstead of field selection
Change-Id: I023122d45a8337fad1e8ed8be12d4c928bdd1292
Reviewed-on: http://gerrit.rockbox.org/106
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
- plugins games keymaps added to the manual
- merge some lines (see chessbox)
Change-Id: Iad97e6d07ae0419f54c26697f157ede3d07bd349
Reviewed-on: http://gerrit.rockbox.org/119
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Following a discution on irc we agreed on that:
- \ButtonPlayPause becomes \ButtonPlay for consistency
- It appeas in the manual as Play unstead of Play/Pause
- updated manual images accordingly
The patch was tested: manual still compile and display keymaps correctly
Change-Id: I04bd3c2bfee1c6c40ab66df9bf33f09f4ed47661
Reviewed-on: http://gerrit.rockbox.org/118
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA
2) the patch also made required change to the manual in order to match code's
change.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL)
TO TEST:
I'm not sure if remote control works anymore and cannot test it. I'm not
sure about the way PLA handle those so if that doesn't work let me know ;)
Change-Id: I3fb81e75ef6e4d49e19be24f09c0413599ed0c9c
Reviewed-on: http://gerrit.rockbox.org/90
Tested-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
1) Multitouch does not work on Fuze+. Unstead we can take advantage of
bottomleft and bottomright button.
2) Manual completed accordingly
Change-Id: I9535865773a2d1e21b1a71af63e4d377abcbc752
Reviewed-on: http://gerrit.rockbox.org/115
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA.
2) the patch also made required change to the manual in order to match code's
change.
3) it also add an alternative exit button (PLA_EXIT or PLA_CANCEL).
Change-Id: If6e78711eaab1dd2c907b418ba72c8789ceaa72b
Reviewed-on: http://gerrit.rockbox.org/105
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
1) On all non PLA plugin, power button is used for exit. For consistency,
we set PLA_EXIT to power button.
2) Manual updated accordingly
Change-Id: Ia4b8fce13bad2f8dc0710cdb29ccf6c74b3fd9c4
Reviewed-on: http://gerrit.rockbox.org/91
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) this patch replace all keymaps with PLA ones. It also clean some optionnal
compiling that are not needed anymore througt PLA
2) the patch also made required change to the manual in order to match code's
change.
Change-Id: I54ec953f79a419a6bb2f78877ca8b82f572fb510
Reviewed-on: http://gerrit.rockbox.org/86
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Use these tags to stop having multiple conditionals.. e.g:
OLD: %?C<%?Ia<something>>
NEW: %?and(%C, %Ia)<something>
Change-Id: Ia3bbe4611cf808e87dcd1b1147181461fa08294a
As done with the screenshots display an error notice when the main image is
missing. Same is done for the remote image for targets that do have a remote.
\IfFileExists requires to use the full filename, not the stem as
\includegraphics accepts happily, so 36489d9 actually broke the main image for
all players.
The note on how to recursively insert files into the dynamic playlist is
present twice so remove one of them. Since this makes the "Useful Hints"
subsection empty remove that as well, there are no hints left that aren't
merged into the text. (FS#12504 by Jean-Louis Biasini).
While at it remove some hard coded newlines. We really don't want them, if we
want a different spacing for new paragraphs this needs to get adjusted in the
preamble, not after each paragraph.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31517 a1c6a512-1295-4272-9138-f99709370657
Add missing keys as \fixme{} and update some opts for text using keys we don't
have on the Fuze+.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31512 a1c6a512-1295-4272-9138-f99709370657
Add the platform files and player images. This doesn't make the Fuze+ manual
build yet, since some keys used in generic text are still missing.
Taken out of FS#12492 by Jean-Louis Biasini.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31511 a1c6a512-1295-4272-9138-f99709370657
A dedicated submenu for items which are run at startup, or initiate a shutdown.
Currently containing: Start Screen, Idle Poweroff, Sleep Timer & Start Sleep Timer on Boot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31435 a1c6a512-1295-4272-9138-f99709370657
