ToggleMode is remapped to BUTTON_SELECT
Reset is remapped to Long BUTTON_HOME or Long BUTTON_SELECT (avoids accidental reset by pressing BUTTON_SELECT)
Change-Id: I6fc4050c66db2d7db7ec899f9c83b70754fef9df
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
- Enable repeat for prev/next keys
- Provide a way to access the context menu using buttons
- Update the manual
Change-Id: I53a7474cc64f915851175aea0695229c581fd8a6
It needs screenshots and slightly better installation instructions
Includes bits shared with other HibyOS platforms
Change-Id: I1c1974143b5badf1aca5c3281556ce553ab1b8a5
Includes installation instructions and a description of Rockbox's
limitations versus the original firmware. Some things are still
missing, notably screenshots for the Q1. The M3K image also needs
to be updated to include the 'select' button.
Change-Id: Ib533206df01925203edeccdd75e1bf22f407e794
Add bottom left as quickscreen and bottom right as hotkey acroos the
board for fuze+. Meant as a
stopgap until gesture support becomes good enough that it is unnecessary
Also adds my name to CREDITS
Change-Id: If1729b7d53d967081b6d97a9a49cd66312c96ed4
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
3D "enhancement" is available on all imx233 platform, and also on platforms
with the WM8978 codec (gigabeats) and WM8750 codec (MPIO HD 200/300). I used
different texts for different codecs because (in theory) they do different
"things".
Change-Id: I62ecb075f7594427491b6be83cfa80f763566aba
The main "innovation" in this patch are two "virtual buttons"
for the record switch on YH92x targets. When the switch state
changes, a single BUTTON_REC_SW_ON or .._OFF button event will
be generated. Thus keymap code can react on switching, but
not on the actual state of the switch.
Wherever sensible, the following user scheme is applied:
- use PLAY as confirm button
- use REW button or Long REW to exit
- use REC (YH820) or FFWD (YH92X) as modifier key for button combos
Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
New section Touchpad added to the manual. Gigabeatfx and
SansaFuze+ entries added for touchpad sensitivity setting.
Change-Id: I0c5a173d6ad479c4e6995cf5045d90da6cc216ab
Reviewed-on: http://gerrit.rockbox.org/689
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
1) Now that recording is working a few keymaps update are required.
2) also implement the radio.c file so that fm dedicated keymaps
works.
3) implement some missing fm keymaps
4) manual updated accordingly
Change-Id: I40be3e245853ccb9ed7a5bc5a76fe4ed90772272
Reviewed-on: http://gerrit.rockbox.org/513
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Makes FM radio keys consistent with the updated Clip keymap in the rest of rockbox. Home now goes to the main menu, power stops the radio, and several other keys are a little more obvious.
Change-Id: Iaab207acf936820d5602ae1ce4ffbbe30bf7877e
- this patch add all general sections of the manual for the fuze+
- also correct some typos
Change-Id: Idd28675f48c0d01079d8fa01d68d3238ad2a54ce
Reviewed-on: http://gerrit.rockbox.org/116
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Following a discution on irc we agreed on that:
- \ButtonPlayPause becomes \ButtonPlay for consistency
- It appeas in the manual as Play unstead of Play/Pause
- updated manual images accordingly
The patch was tested: manual still compile and display keymaps correctly
Change-Id: I04bd3c2bfee1c6c40ab66df9bf33f09f4ed47661
Reviewed-on: http://gerrit.rockbox.org/118
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
1) On all non PLA plugin, power button is used for exit. For consistency,
we set PLA_EXIT to power button.
2) Manual updated accordingly
Change-Id: Ia4b8fce13bad2f8dc0710cdb29ccf6c74b3fd9c4
Reviewed-on: http://gerrit.rockbox.org/91
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Add missing keys as \fixme{} and update some opts for text using keys we don't
have on the Fuze+.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31512 a1c6a512-1295-4272-9138-f99709370657
Add the platform files and player images. This doesn't make the Fuze+ manual
build yet, since some keys used in generic text are still missing.
Taken out of FS#12492 by Jean-Louis Biasini.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31511 a1c6a512-1295-4272-9138-f99709370657
Make users happy, as now short down does nothing (but bring backlight on)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27982 a1c6a512-1295-4272-9138-f99709370657
