Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

x1000: move NAND commands to header file

Browse source 
Change-Id: Ic95b80494a101f7b349e115d82e9dfe3a64b643f
This commit is contained in:
Aidan MacDonald 2022-05-30 14:02:13 +01:00
parent 1d39261338
commit e05aa27124
2 changed files with 33 additions and 33 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

33
firmware/target/mips/ingenic_x1000/nand-x1000.c
View file

@ -24,39 +24,6 @@
#include "system.h"
#include <string.h>
/* cmd mode a d phase format has data */
#define NANDCMD_RESET SFC_CMD(0xff, SFC_TMODE_1_1_1, 0, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_READID(x,y) SFC_CMD(0x9f, SFC_TMODE_1_1_1, x, y, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_WR_EN SFC_CMD(0x06, SFC_TMODE_1_1_1, 0, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_GET_FEATURE SFC_CMD(0x0f, SFC_TMODE_1_1_1, 1, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_SET_FEATURE SFC_CMD(0x1f, SFC_TMODE_1_1_1, 1, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PAGE_READ(x) SFC_CMD(0x13, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_READ_CACHE(x) SFC_CMD(0x0b, SFC_TMODE_1_1_1, x, 8, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_READ_CACHE_x4(x) SFC_CMD(0x6b, SFC_TMODE_1_1_4, x, 8, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_LOAD(x) SFC_CMD(0x02, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_LOAD_x4(x) SFC_CMD(0x32, SFC_TMODE_1_1_4, x, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_EXECUTE(x) SFC_CMD(0x10, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_BLOCK_ERASE(x) SFC_CMD(0xd8, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
/* Feature registers are found in linux/mtd/spinand.h,
* apparently these are pretty standardized */
#define FREG_PROT 0xa0
#define FREG_PROT_UNLOCK 0x00
#define FREG_CFG 0xb0
#define FREG_CFG_OTP_ENABLE (1 << 6)
#define FREG_CFG_ECC_ENABLE (1 << 4)
#define FREG_CFG_QUAD_ENABLE (1 << 0)
#define FREG_STATUS 0xc0
#define FREG_STATUS_BUSY (1 << 0)
#define FREG_STATUS_EFAIL (1 << 2)
#define FREG_STATUS_PFAIL (1 << 3)
#define FREG_STATUS_ECC_MASK (3 << 4)
#define FREG_STATUS_ECC_NO_FLIPS (0 << 4)
#define FREG_STATUS_ECC_HAS_FLIPS (1 << 4)
#define FREG_STATUS_ECC_UNCOR_ERR (2 << 4)
const nand_chip supported_nand_chips[] = {
#if defined(FIIO_M3K) || defined(SHANLING_Q1) || defined(EROS_QN)
{

33
firmware/target/mips/ingenic_x1000/nand-x1000.h
View file

@ -42,6 +42,39 @@
/* Chip requires QE bit set to enable quad I/O mode */
#define NAND_CHIPFLAG_HAS_QE_BIT 0x0002
/* cmd mode a d phase format has data */
#define NANDCMD_RESET SFC_CMD(0xff, SFC_TMODE_1_1_1, 0, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_READID(x,y) SFC_CMD(0x9f, SFC_TMODE_1_1_1, x, y, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_WR_EN SFC_CMD(0x06, SFC_TMODE_1_1_1, 0, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_GET_FEATURE SFC_CMD(0x0f, SFC_TMODE_1_1_1, 1, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_SET_FEATURE SFC_CMD(0x1f, SFC_TMODE_1_1_1, 1, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PAGE_READ(x) SFC_CMD(0x13, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_READ_CACHE(x) SFC_CMD(0x0b, SFC_TMODE_1_1_1, x, 8, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_READ_CACHE_x4(x) SFC_CMD(0x6b, SFC_TMODE_1_1_4, x, 8, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_LOAD(x) SFC_CMD(0x02, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_LOAD_x4(x) SFC_CMD(0x32, SFC_TMODE_1_1_4, x, 0, SFC_PFMT_ADDR_FIRST, 1)
#define NANDCMD_PROGRAM_EXECUTE(x) SFC_CMD(0x10, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
#define NANDCMD_BLOCK_ERASE(x) SFC_CMD(0xd8, SFC_TMODE_1_1_1, x, 0, SFC_PFMT_ADDR_FIRST, 0)
/* Feature registers are found in linux/mtd/spinand.h,
* apparently these are pretty standardized */
#define FREG_PROT 0xa0
#define FREG_PROT_UNLOCK 0x00
#define FREG_CFG 0xb0
#define FREG_CFG_OTP_ENABLE (1 << 6)
#define FREG_CFG_ECC_ENABLE (1 << 4)
#define FREG_CFG_QUAD_ENABLE (1 << 0)
#define FREG_STATUS 0xc0
#define FREG_STATUS_BUSY (1 << 0)
#define FREG_STATUS_EFAIL (1 << 2)
#define FREG_STATUS_PFAIL (1 << 3)
#define FREG_STATUS_ECC_MASK (3 << 4)
#define FREG_STATUS_ECC_NO_FLIPS (0 << 4)
#define FREG_STATUS_ECC_HAS_FLIPS (1 << 4)
#define FREG_STATUS_ECC_UNCOR_ERR (2 << 4)
/* Types to distinguish between block & page addresses in the API.
*
* BIT 31 log2_ppb bits