Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

The i2c driver did not conform with i2c spec and was missing the restart. Some of the commands worked, but not every time.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11915 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Steve Gotthardt 2007-01-05 08:50:09 +00:00
parent 5668505d6b
commit ccfa883d78
1 changed files with 80 additions and 43 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

123
firmware/target/arm/gigabeat/meg-fx/sc606-meg-fx.c
View file

@ -10,23 +10,28 @@
#define SLAVE_ADDRESS 0xCC
#define SDA_LO GPHDAT &= ~(1 << 9)
#define SDA_HI GPHDAT |= (1 << 9)
#define SDA_INPUT GPHCON &= ~(3 << 18)
#define SDA_OUTPUT GPHCON |= (1 << 18)
#define SDA GPHDAT & (1 << 9)
#define SDA_LO (GPHDAT &= ~(1 << 9))
#define SDA_HI (GPHDAT |= (1 << 9))
#define SDA_INPUT (GPHCON &= ~(3 << 18))
#define SDA_OUTPUT (GPHCON |= (1 << 18))
#define SDA (GPHDAT & (1 << 9))
#define SCL_LO GPHDAT &= ~(1 << 10)
#define SCL_HI GPHDAT |= (1 << 10)
#define SCL_INPUT GPHCON &= ~(3 << 20)
#define SCL_OUTPUT GPHCON |= (1 << 20)
#define SCL GPHDAT & (1 << 10)
#define SCL_LO (GPHDAT &= ~(1 << 10))
#define SCL_HI (GPHDAT |= (1 << 10))
#define SCL_INPUT (GPHCON &= ~(3 << 20))
#define SCL_OUTPUT (GPHCON |= (1 << 20))
#define SCL (GPHDAT & (1 << 10))
#define SCL_SDA_HI GPHDAT |= (3 << 9)
#define SCL_SDA_HI (GPHDAT |= (3 << 9))
/* The SC606 can clock at 400KHz: 2.5uS period -> 1.25uS half period */
/* At 300Mhz - if loop takes 10 cycles @ 3.3nS each -> 1.25uS / 30nS -> 40 */
#define DELAY do { volatile int _x; for(_x=0;_x<40;_x++);} while (0)
/* The high and low times are different enough to need different timings */
/* At 300Mhz - one loop takes about 10 cycles */
#define DELAY_LO do { volatile int _x; for(_x=0;_x<20;_x++);} while (0)
#define DELAY do { volatile int _x; for(_x=0;_x<15;_x++);} while (0)
#define DELAY_HI do { volatile int _x; for(_x=0;_x<10;_x++);} while (0)
static void sc606_i2c_start(void)
{
@ -49,11 +54,9 @@ static void sc606_i2c_restart(void)
static void sc606_i2c_stop(void)
{
SDA_LO;
DELAY;
SCL_HI;
DELAY;
DELAY_HI;
SDA_HI;
DELAY;
}
static void sc606_i2c_ack(void)
@ -61,52 +64,66 @@ static void sc606_i2c_ack(void)
SDA_LO;
SCL_HI;
DELAY;
DELAY_HI;
SCL_LO;
}
static int sc606_i2c_getack(void)
{
int ret = 0;
int ret;
/* Don't need a delay since follows a data bit with a delay on the end */
SDA_INPUT; /* And set to input */
DELAY;
SCL_HI;
DELAY;
if (SDA) /* ack failed */
ret = 1;
ret = (SDA != 0); /* ack failed if SDA is not low */
DELAY_HI;
DELAY;
SCL_LO;
DELAY;
DELAY_LO;
SDA_HI;
SDA_OUTPUT;
DELAY_LO;
return ret;
}
static int sc606_i2c_outb(unsigned char byte)
static void sc606_i2c_outb(unsigned char byte)
{
int i;
/* clock out each bit, MSB first */
for (i = 0x80; i; i >>= 1) {
for (i = 0x80; i; i >>= 1)
{
if (i & byte)
{
SDA_HI;
}
else
{
SDA_LO;
}
DELAY;
if (i & byte) {
SDA_HI;
} else {
SDA_LO;
}
SCL_HI;
DELAY_HI;
DELAY;
SCL_HI;
DELAY;
SCL_LO;
DELAY;
SCL_LO;
DELAY_LO;
}
return sc606_i2c_getack();
SDA_HI;
}
static unsigned char sc606_i2c_inb(void)
{
int i;
@ -131,37 +148,57 @@ static unsigned char sc606_i2c_inb(void)
/* returns number of acks that were bad */
int sc606_write(unsigned char reg, unsigned char data)
{
int x = 0;
sc606_i2c_start();
x += sc606_i2c_outb(SLAVE_ADDRESS);
x += 0x10 * sc606_i2c_outb(reg);
sc606_i2c_start();
/* sc606_i2c_restart(); */
x += 0x100 * sc606_i2c_outb(SLAVE_ADDRESS);
x += 0x1000 *sc606_i2c_outb(data);
sc606_i2c_outb(SLAVE_ADDRESS);
x = sc606_i2c_getack();
sc606_i2c_outb(reg);
x += sc606_i2c_getack();
sc606_i2c_restart();
sc606_i2c_outb(SLAVE_ADDRESS);
x += sc606_i2c_getack();
sc606_i2c_outb(data);
x += sc606_i2c_getack();
sc606_i2c_stop();
return x;
}
int sc606_read(unsigned char reg, unsigned char* data)
{
int x = 0;
sc606_i2c_start();
sc606_i2c_outb(SLAVE_ADDRESS);
x = sc606_i2c_getack();
sc606_i2c_outb(reg);
x += sc606_i2c_getack();
sc606_i2c_restart();
sc606_i2c_outb(SLAVE_ADDRESS | 1);
x += sc606_i2c_getack();
*data = sc606_i2c_inb();
sc606_i2c_stop();
return x;
}
void sc606_init(void)
{
volatile int i;
@ -176,7 +213,7 @@ void sc606_init(void)
/* About 400us - needs 350us */
for (i = 200; i; i--)
{
DELAY;
DELAY_LO;
}
/* Set GPH9 (SDA) and GPH10 (SCL) to 1 */