imx233: add pwm driver

Change-Id: Ib920b119f52b492247d75e97c5ec9298146d583c

firmware/SOURCES

@@ -515,6 +515,7 @@ target/arm/imx233/power-imx233.c
 target/arm/imx233/powermgmt-imx233.c
 target/arm/imx233/adc-imx233.c
 target/arm/imx233/lradc-imx233.c
+target/arm/imx233/pwm-imx233.c
 target/arm/imx233/rtc-imx233.c
 target/arm/imx233/dcp-imx233.c
 #ifndef BOOTLOADER

firmware/target/arm/imx233/pwm-imx233.c

@@ -0,0 +1,64 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2011 by Amaury Pouly
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "pwm-imx233.h"
+#include "clkctrl-imx233.h"
+#include "pinctrl-imx233.h"
+
+void imx233_pwm_init(void)
+{
+    imx233_reset_block(&HW_PWM_CTRL);
+    imx233_clkctrl_enable_xtal(XTAM_PWM, true);
+}
+
+bool imx233_pwm_is_channel_enable(int channel)
+{
+    return HW_PWM_CTRL & HW_PWM_CTRL__PWMx_ENABLE(channel);
+}
+
+void imx233_pwm_enable_channel(int channel, bool enable)
+{
+    if(enable)
+        __REG_SET(HW_PWM_CTRL) = HW_PWM_CTRL__PWMx_ENABLE(channel);
+    else
+        __REG_CLR(HW_PWM_CTRL) = HW_PWM_CTRL__PWMx_ENABLE(channel);
+}
+
+void imx233_pwm_setup_channel(int channel, int period, int cdiv, int active,
+    int active_state, int inactive, int inactive_state)
+{
+    /* stop */
+    bool enable = imx233_pwm_is_channel_enable(channel);
+    if(enable)
+        imx233_pwm_enable_channel(channel, false);
+    /* setup pin */
+    imx233_set_pin_function(IMX233_PWM_PIN_BANK(channel), IMX233_PWM_PIN(channel),
+        PINCTRL_FUNCTION_MAIN);
+    imx233_set_pin_drive_strength(IMX233_PWM_PIN_BANK(channel), IMX233_PWM_PIN(channel),
+        PINCTRL_DRIVE_4mA);
+    /* watch the order ! active THEN period */
+    HW_PWM_ACTIVEx(channel) = active << HW_PWM_ACTIVEx__ACTIVE_BP |
+        inactive << HW_PWM_ACTIVEx__INACTIVE_BP;
+    HW_PWM_PERIODx(channel) = period | active_state << HW_PWM_PERIODx__ACTIVE_STATE_BP |
+        inactive_state << HW_PWM_PERIODx__INACTIVE_STATE_BP |
+        cdiv << HW_PWM_PERIODx__CDIV_BP;
+    /* restore */
+    imx233_pwm_enable_channel(channel, enable);
+}

firmware/target/arm/imx233/pwm-imx233.h

@@ -0,0 +1,68 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2011 by Amaury Pouly
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef __PWM_IMX233_H__
+#define __PWM_IMX233_H__
+
+#include "system.h"
+
+#define HW_PWM_BASE     0x80064000 
+
+#define HW_PWM_CTRL         (*(volatile uint32_t *)(HW_PWM_BASE + 0x0))
+#define HW_PWM_CTRL__PWMx_ENABLE(x) (1 << (x))
+
+#define HW_PWM_ACTIVEx(x)   (*(volatile uint32_t *)(HW_PWM_BASE + 0x10 + (x) * 0x20))
+#define HW_PWM_ACTIVEx__ACTIVE_BP   0
+#define HW_PWM_ACTIVEx__ACTIVE_BM   0xffff
+#define HW_PWM_ACTIVEx__INACTIVE_BP 16
+#define HW_PWM_ACTIVEx__INACTIVE_BM 0xffff0000
+
+#define HW_PWM_PERIODx(x)   (*(volatile uint32_t *)(HW_PWM_BASE + 0x20 + (x) * 0x20))
+#define HW_PWM_PERIODx__PERIOD_BP   0
+#define HW_PWM_PERIODx__PERIOD_BM   0xffff
+#define HW_PWM_PERIODx__ACTIVE_STATE_BP     16
+#define HW_PWM_PERIODx__ACTIVE_STATE_BM     (0x3 << 16)
+#define HW_PWM_PERIODx__INACTIVE_STATE_BP   18
+#define HW_PWM_PERIODx__INACTIVE_STATE_BM   (0x3 << 18)
+#define HW_PWM_PERIODx__CDIV_BP     20
+#define HW_PWM_PERIODx__CDIV_BM     (0x7 << 20)
+#define HW_PWM_PERIODx__CDIV__DIV_1     0
+#define HW_PWM_PERIODx__CDIV__DIV_2     1
+#define HW_PWM_PERIODx__CDIV__DIV_4     2
+#define HW_PWM_PERIODx__CDIV__DIV_8     3
+#define HW_PWM_PERIODx__CDIV__DIV_16    4
+#define HW_PWM_PERIODx__CDIV__DIV_64    5
+#define HW_PWM_PERIODx__CDIV__DIV_256   6
+#define HW_PWM_PERIODx__CDIV__DIV_1024  7
+
+#define HW_PWM_PERIODx__STATE__HI_Z 0
+#define HW_PWM_PERIODx__STATE__LOW  2
+#define HW_PWM_PERIODx__STATE__HIGH 3
+
+#define IMX233_PWM_PIN_BANK(channel)    1
+#define IMX233_PWM_PIN(channel) (26 + (channel))
+
+void imx233_pwm_init(void);
+void imx233_pwm_setup_channel(int channel, int period, int cdiv, int active,
+    int active_state, int inactive, int inactive_state);
+void imx233_pwm_enable_channel(int channel, bool enable);
+bool imx233_pwm_is_channel_enable(int channel);
+
+#endif /* __PWM_IMX233_H__ */

firmware/target/arm/imx233/system-imx233.c

@@ -31,6 +31,7 @@
 #include "ssp-imx233.h"
 #include "i2c-imx233.h"
 #include "dcp-imx233.h"
+#include "pwm-imx233.h"
 #include "icoll-imx233.h"
 #include "lradc-imx233.h"
 #include "rtc-imx233.h"
@@ -99,6 +100,7 @@ void system_init(void)
     imx233_dma_init();
     imx233_ssp_init();
     imx233_dcp_init();
+    imx233_pwm_init();
     imx233_lradc_init();
     imx233_i2c_init();
 #if defined(SANSA_FUZEPLUS) && !defined(BOOTLOADER)