Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29099 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Sevakis
parent
5230362515
commit
863c03f2ae
4 changed files with 90 additions and 79 deletions
|
|
@ -8,6 +8,7 @@ ipod.c
|
|||
gigabeat.c
|
||||
#elif defined(GIGABEAT_S)
|
||||
gigabeat-s.c
|
||||
show_logo.c
|
||||
../firmware/target/arm/imx31/mmu-imx31.c
|
||||
#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) || \
|
||||
defined(SANSA_E200) || defined(SANSA_C200) || \
|
||||
|
|
|
|||
|
|
@ -45,7 +45,8 @@
|
|||
|| defined(SAMSUNG_YH925) || defined(SAMSUNG_YH920) \
|
||||
|| defined(SAMSUNG_YH820) || defined(PHILIPS_SA9200) \
|
||||
|| defined(PHILIPS_HDD1630) || defined(PHILIPS_HDD6330) \
|
||||
|| defined(ONDA_VX747) || defined(PBELL_VIBE500)
|
||||
|| defined(ONDA_VX747) || defined(PBELL_VIBE500) \
|
||||
|| defined(TOSHIBA_GIGABEAT_S)
|
||||
bool verbose = false;
|
||||
#else
|
||||
bool verbose = true;
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@
|
|||
#include "dir.h"
|
||||
#include "disk.h"
|
||||
#include "common.h"
|
||||
#include "power.h"
|
||||
#include "backlight.h"
|
||||
#include "usb.h"
|
||||
#include "button.h"
|
||||
|
|
@ -38,6 +39,9 @@
|
|||
#include "usb-target.h"
|
||||
#include "version.h"
|
||||
|
||||
/* Show the Rockbox logo - in show_logo.c */
|
||||
extern int show_logo(void);
|
||||
|
||||
#define TAR_CHUNK 512
|
||||
#define TAR_HEADER_SIZE 157
|
||||
|
||||
|
|
@ -51,67 +55,44 @@ static void * const load_buf = 0x00000000;
|
|||
static const size_t load_buf_size = 0x20000000 - 0x100000;
|
||||
static const void * const start_addr = 0x00000000;
|
||||
|
||||
static void show_splash(int timeout, const char *msg)
|
||||
/* Show a message + "Shutting down...", then power off the device */
|
||||
static void display_message_and_power_off(int timeout, const char *msg)
|
||||
{
|
||||
backlight_on();
|
||||
reset_screen();
|
||||
lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2,
|
||||
(LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
|
||||
lcd_update();
|
||||
|
||||
verbose = true;
|
||||
printf(msg);
|
||||
printf("Shutting down...");
|
||||
sleep(timeout);
|
||||
power_off();
|
||||
}
|
||||
|
||||
static bool pause_if_button_pressed(bool pre_usb)
|
||||
static void check_battery_safe(void)
|
||||
{
|
||||
while (1)
|
||||
{
|
||||
int button = button_read_device();
|
||||
if (battery_level_safe())
|
||||
return;
|
||||
|
||||
if (pre_usb && !usb_plugged())
|
||||
return false;
|
||||
|
||||
/* Exit if no button or only select buttons that have other
|
||||
* functions */
|
||||
switch (button)
|
||||
{
|
||||
case USB_BL_INSTALL_MODE_BTN:
|
||||
if (!pre_usb)
|
||||
break; /* Only before USB detect */
|
||||
case BUTTON_MENU: /* Settings reset */
|
||||
case BUTTON_NONE: /* Nothing pressed */
|
||||
return true;
|
||||
}
|
||||
|
||||
sleep(HZ/5);
|
||||
|
||||
/* If the disk powers off, the firmware will lock at startup */
|
||||
storage_spin();
|
||||
}
|
||||
display_message_and_power_off(HZ, "Battery low");
|
||||
}
|
||||
|
||||
/* TODO: Handle charging while connected */
|
||||
static void handle_usb(void)
|
||||
static void handle_usb(int connect_timeout)
|
||||
{
|
||||
long end_tick = 0;
|
||||
int button;
|
||||
|
||||
/* Check if plugged and pause to look at messages. If the cable was pulled
|
||||
* while waiting, proceed as if it never was plugged. */
|
||||
if (!usb_plugged() || !pause_if_button_pressed(true))
|
||||
return;
|
||||
|
||||
/** Enter USB mode **/
|
||||
|
||||
/* We need full button and backlight handling now */
|
||||
backlight_init();
|
||||
button_init();
|
||||
backlight_on();
|
||||
|
||||
/* Start the USB driver */
|
||||
usb_init();
|
||||
usb_start_monitoring();
|
||||
|
||||
/* Wait for threads to connect or cable is pulled */
|
||||
show_splash(HZ/2, "Waiting for USB");
|
||||
printf("USB: Connecting");
|
||||
|
||||
if (connect_timeout != TIMEOUT_BLOCK)
|
||||
end_tick = current_tick + connect_timeout;
|
||||
|
||||
while (1)
|
||||
{
|
||||
|
|
@ -120,35 +101,47 @@ static void handle_usb(void)
|
|||
if (button == SYS_USB_CONNECTED)
|
||||
break; /* Hit */
|
||||
|
||||
if (connect_timeout != TIMEOUT_BLOCK &&
|
||||
TIME_AFTER(current_tick, end_tick))
|
||||
{
|
||||
/* Timed out waiting for the connect - will happen when connected
|
||||
* to a charger through the USB port */
|
||||
printf("USB: Timed out");
|
||||
break;
|
||||
}
|
||||
|
||||
if (!usb_plugged())
|
||||
break; /* Cable pulled */
|
||||
}
|
||||
|
||||
if (button == SYS_USB_CONNECTED)
|
||||
{
|
||||
/* Switch to verbose mode if not in it so that the status updates
|
||||
* are shown */
|
||||
verbose = true;
|
||||
/* Got the message - wait for disconnect */
|
||||
show_splash(0, "Bootloader USB mode");
|
||||
printf("Bootloader USB mode");
|
||||
|
||||
usb_acknowledge(SYS_USB_CONNECTED_ACK);
|
||||
|
||||
while (1)
|
||||
{
|
||||
button = button_get(true);
|
||||
button = button_get_w_tmo(HZ/2);
|
||||
if (button == SYS_USB_DISCONNECTED)
|
||||
break;
|
||||
|
||||
check_battery_safe();
|
||||
}
|
||||
|
||||
backlight_on();
|
||||
/* Sleep a little to let the backlight ramp up */
|
||||
sleep(HZ*5/4);
|
||||
}
|
||||
|
||||
/* Put drivers initialized for USB connection into a known state */
|
||||
backlight_on();
|
||||
usb_close();
|
||||
button_close();
|
||||
backlight_close();
|
||||
|
||||
/* Sleep a little to let the backlight ramp up */
|
||||
sleep(HZ*5/4);
|
||||
|
||||
reset_screen();
|
||||
}
|
||||
|
||||
static void untar(int tar_fd)
|
||||
|
|
@ -265,6 +258,7 @@ static void handle_untar(void)
|
|||
model[4] = 0;
|
||||
if (strcmp(model, "gigs") == 0)
|
||||
{
|
||||
verbose = true;
|
||||
printf("Found rockbox binary. Moving...");
|
||||
close(fd);
|
||||
remove( BOOTDIR "/" BOOTFILE);
|
||||
|
|
@ -283,6 +277,7 @@ static void handle_untar(void)
|
|||
tarstring[5] = 0;
|
||||
if (strcmp(tarstring, "ustar") == 0)
|
||||
{
|
||||
verbose = true;
|
||||
printf("Found tar file. Unarchiving...");
|
||||
lseek(fd, 0, SEEK_SET);
|
||||
untar(fd);
|
||||
|
|
@ -300,14 +295,27 @@ static void handle_untar(void)
|
|||
/* Try to load the firmware and run it */
|
||||
static void NORETURN_ATTR handle_firmware_load(void)
|
||||
{
|
||||
int rc = load_firmware(load_buf, BOOTFILE,
|
||||
load_buf_size);
|
||||
int rc = load_firmware(load_buf, BOOTFILE, load_buf_size);
|
||||
|
||||
if(rc < 0)
|
||||
error(EBOOTFILE, rc, true);
|
||||
|
||||
/* Pause to look at messages */
|
||||
pause_if_button_pressed(false);
|
||||
while (1)
|
||||
{
|
||||
int button = button_read_device();
|
||||
|
||||
/* Ignore settings reset */
|
||||
if (button == BUTTON_NONE || button == BUTTON_MENU)
|
||||
break;
|
||||
|
||||
sleep(HZ/5);
|
||||
|
||||
check_battery_safe();
|
||||
|
||||
/* If the disk powers off, the firmware will lock at startup */
|
||||
storage_spin();
|
||||
}
|
||||
|
||||
/* Put drivers into a known state */
|
||||
button_close_device();
|
||||
|
|
@ -316,7 +324,7 @@ static void NORETURN_ATTR handle_firmware_load(void)
|
|||
|
||||
if (rc == EOK)
|
||||
{
|
||||
cpucache_invalidate();
|
||||
cpucache_commit_discard();
|
||||
asm volatile ("bx %0": : "r"(start_addr));
|
||||
}
|
||||
|
||||
|
|
@ -325,58 +333,55 @@ static void NORETURN_ATTR handle_firmware_load(void)
|
|||
core_idle();
|
||||
}
|
||||
|
||||
static void check_battery(void)
|
||||
{
|
||||
int batt = battery_adc_voltage();
|
||||
printf("Battery: %d.%03d V", batt / 1000, batt % 1000);
|
||||
/* TODO: warn on low battery or shut down */
|
||||
}
|
||||
|
||||
void main(void)
|
||||
{
|
||||
int rc;
|
||||
|
||||
/* Flush and invalidate all caches (because vectors were written) */
|
||||
cpucache_invalidate();
|
||||
int batt;
|
||||
|
||||
system_init();
|
||||
kernel_init();
|
||||
|
||||
enable_interrupt(IRQ_FIQ_STATUS);
|
||||
|
||||
lcd_init_device();
|
||||
/* Keep button_device_init early to delay calls to button_read_device */
|
||||
button_init_device();
|
||||
|
||||
lcd_init();
|
||||
font_init();
|
||||
show_logo();
|
||||
lcd_clear_display();
|
||||
|
||||
if (button_hold())
|
||||
display_message_and_power_off(HZ, "Hold switch on");
|
||||
|
||||
if (button_read_device() != BUTTON_NONE)
|
||||
verbose = true;
|
||||
|
||||
printf("Gigabeat S Rockbox Bootloader");
|
||||
printf("Version " RBVERSION);
|
||||
|
||||
/* Initialize KPP so we can poll the button states */
|
||||
button_init_device();
|
||||
|
||||
adc_init();
|
||||
|
||||
check_battery();
|
||||
batt = battery_adc_voltage();
|
||||
printf("Battery: %d.%03d V", batt / 1000, batt % 1000);
|
||||
check_battery_safe();
|
||||
|
||||
rc = storage_init();
|
||||
if(rc)
|
||||
{
|
||||
reset_screen();
|
||||
error(EATA, rc, true);
|
||||
}
|
||||
|
||||
disk_init();
|
||||
|
||||
rc = disk_mount_all();
|
||||
if (rc<=0)
|
||||
{
|
||||
if (rc <= 0)
|
||||
error(EDISK, rc, true);
|
||||
}
|
||||
|
||||
printf("Init complete");
|
||||
|
||||
/* Do USB first since a tar or binary could be added to the MTP directory
|
||||
* at the time and we can untar or move after unplugging. */
|
||||
handle_usb();
|
||||
if (usb_plugged())
|
||||
handle_usb(HZ*2);
|
||||
|
||||
handle_untar();
|
||||
handle_firmware_load(); /* No return */
|
||||
}
|
||||
|
|
|
|||
|
|
@ -298,7 +298,7 @@ remap_end:
|
|||
#endif
|
||||
|
||||
/* Make memory coherent for devices */
|
||||
bl clean_dcache
|
||||
bl cpucache_commit_discard
|
||||
|
||||
bl main
|
||||
|
||||
|
|
@ -351,9 +351,13 @@ data_abort_handler:
|
|||
b UIE
|
||||
|
||||
/* 256 words of IRQ stack */
|
||||
.section .bss
|
||||
.balign 32
|
||||
.space 256*4
|
||||
irq_stack:
|
||||
|
||||
/* 256 words of FIQ stack */
|
||||
.section .bss
|
||||
.balign 32
|
||||
.space 256*4
|
||||
fiq_stack:
|
||||
|
|
|
|||
Loading…
Reference in a new issue