Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

imx233:fuze+: major memory and usb rework

Browse source 
- now identity map dram uncached and have a cached and buffered virtual alias
- rework dma to handle virtual to physical pointers conversion
- fix lcd frame pointer
- implement usb detection properly
- implement bootloader usb properly
- allow the bootloader to disable MMC windowing (useful for recovery)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30432 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Amaury Pouly 2011-09-05 11:29:32 +00:00
parent 11e1f71612
commit 7d4fed53cc
17 changed files with 353 additions and 104 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

96
bootloader/imx233.c
View file

@ -39,6 +39,69 @@
#include "fmradio_i2c.h"
#include "usb.h"
#include "usb-target.h"
#include "clkctrl-imx233.h"
#ifdef HAVE_BOOTLOADER_USB_MODE
static void usb_mode(int connect_timeout)
{
int button;
usb_init();
usb_start_monitoring();
/* Wait for threads to connect or cable is pulled */
printf("USB: Connecting");
long end_tick = current_tick + connect_timeout;
while(1)
{
button = button_get_w_tmo(HZ/10);
if(button == SYS_USB_CONNECTED)
break; /* Hit */
if(TIME_AFTER(current_tick, end_tick))
{
/* Timed out waiting for the connect - will happen when connected
* to a charger through the USB port */
printf("USB: Timed out");
break;
}
if(!usb_plugged())
break; /* Cable pulled */
}
if(button == SYS_USB_CONNECTED)
{
/* Got the message - wait for disconnect */
printf("Bootloader USB mode");
usb_acknowledge(SYS_USB_CONNECTED_ACK);
while(1)
{
button = button_get_w_tmo(HZ/2);
if(button == SYS_USB_DISCONNECTED)
break;
}
}
/* Put drivers initialized for USB connection into a known state */
usb_close();
system_exception_wait();
power_off();
}
#else /* !HAVE_BOOTLOADER_USB_MODE */
static void usb_mode(int connect_timeout)
{
(void) connect_timeout;
}
#endif /* HAVE_BOOTLOADER_USB_MODE */
void main(uint32_t arg) NORETURN_ATTR;
void main(uint32_t arg)
@ -51,6 +114,7 @@ void main(uint32_t arg)
system_init();
kernel_init();
power_init();
enable_irq();
lcd_init();
@ -59,32 +123,32 @@ void main(uint32_t arg)
backlight_init();
button_init_device();
button_init();
//button_debug_screen();
printf("arg=%c%c%c%c", arg >> 24,
(arg >> 16) & 0xff, (arg >> 8) & 0xff, (arg & 0xff));
printf("arg=%x", arg);
#ifdef SANSA_FUZEPLUS
extern void imx233_mmc_disable_window(void);
if(arg == 0xfee1dead)
{
printf("Disable MMC window.");
imx233_mmc_disable_window();
}
#endif
ret = storage_init();
if(ret < 0)
error(EATA, ret, true);
#ifdef HAVE_BOOTLOADER_USB_MODE
usb_init();
usb_core_enable_driver(USB_DRIVER_SERIAL, true);
usb_attach();
while(!(button_read_device() & BUTTON_POWER))
yield();
power_off();
#endif /* HAVE_BOOTLOADER_USB_MODE */
if(usb_plugged())
usb_mode(HZ * 2);
while(!disk_init(IF_MV(0)))
panicf("disk_init failed!");
printf("disk_init failed!");
while((ret = disk_mount_all()) <= 0)
{
error(EDISK, ret, true);
}
if((ret = disk_mount_all()) <= 0)
error(EDISK, ret, false);
if(button_read_device() & BUTTON_VOL_UP)
printf("Booting from SD card required.");

2
firmware/export/config.h
View file

@ -937,7 +937,7 @@ Lyre prototype 1 */
#endif /* CPU_PP */
#if CONFIG_CPU == IMX31L
#if CONFIG_CPU == IMX31L || CONFIG_CPU == IMX233
#define NOCACHEBSS_ATTR __attribute__((section(".ncbss"),nocommon))
#define NOCACHEDATA_ATTR __attribute__((section(".ncdata"),nocommon))
#endif

2
firmware/export/config/sansafuzeplus.h
View file

@ -172,7 +172,7 @@
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74e1
#define HAVE_USB_HID_MOUSE
//#define HAVE_BOOTLOADER_USB_MODE
#define HAVE_BOOTLOADER_USB_MODE
/* The fuze+ actually interesting partition table does not use 512-byte sector
* (usually 2048 logical sector size) */

30
firmware/export/imx233.h
View file

@ -21,17 +21,41 @@
#ifndef __IMX233_H__
#define __IMX233_H__
/*
* Chip Memory Map:
* 0x00000000 - 0x00007fff: on chip ram
* 0x40000000 - 0x5fffffff: dram (512Mb max)
* 0x80000000 - 0x80100000: memory mapped registers
* We use the following map:
* 0x60000000 - 0x7fffffff: dram (cached)
* 0x90000000 - 0xafffffff: dram (buffered)
* everything else : identity mapped (uncached)
*
* As a side note it's important to notice that uncached dram is identity mapped
*/
#define IRAM_ORIG 0
#define IRAM_SIZE 0x8000
#define DRAM_ORIG 0x40000000
#define DRAM_SIZE (MEMORYSIZE * 0x100000)
#define UNCACHED_DRAM_ADDR 0x40000000
#define CACHED_DRAM_ADDR 0x60000000
#define BUFFERED_DRAM_ADDR 0x90000000
#define CACHEALIGN_SIZE 32
#define PHYSICAL_ADDR(a) \
((typeof(a))((uintptr_t)(a) >= CACHED_DRAM_ADDR ? \
((uintptr_t)(a) - CACHED_DRAM_ADDR + UNCACHED_DRAM_ADDR) \
:(uintptr_t)(a)))
#define UNCACHED_ADDR(a) PHYSICAL_ADDR(a)
#define TTB_BASE_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE)
#define TTB_SIZE 0x4000
#define TTB_BASE ((unsigned long *)TTB_BASE_ADDR)
#define FRAME_SIZE (LCD_WIDTH * LCD_HEIGHT * LCD_DEPTH / 8)
#define LCD_FRAME_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE - FRAME_SIZE)
#define FRAME ((unsigned short *)LCD_FRAME_ADDR)
#define FRAME_PHYS_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE - FRAME_SIZE)
#define FRAME ((void *)(FRAME_PHYS_ADDR - UNCACHED_DRAM_ADDR + BUFFERED_DRAM_ADDR))
/* USBOTG */
#define USB_QHARRAY_ATTR __attribute__((section(".qharray"),nocommon,aligned(2048)))
@ -52,5 +76,7 @@
#define CACHEALIGN_BITS 4
#define __XTRACT(reg, field) ((reg & reg##__##field##_BM) >> reg##__##field##_BP)
#define __XTRACT_EX(val, field) (((val) & field##_BM) >> field##_BP)
#endif /* __IMX233_H__ */

16
firmware/target/arm/imx233/boot.lds
View file

@ -9,7 +9,8 @@ STARTUP(target/arm/imx233/crt0.o)
MEMORY
{
IRAM : ORIGIN = IRAM_ORIG, LENGTH = IRAM_SIZE
DRAM : ORIGIN = DRAM_ORIG, LENGTH = DRAM_SIZE - TTB_SIZE - FRAME_SIZE
DRAM : ORIGIN = CACHED_DRAM_ADDR, LENGTH = DRAM_SIZE - TTB_SIZE - FRAME_SIZE
UNCACHED_DRAM : ORIGIN = UNCACHED_DRAM_ADDR, LENGTH = DRAM_SIZE - TTB_SIZE - FRAME_SIZE
}
SECTIONS
@ -57,10 +58,23 @@ SECTIONS
stackend = .;
} > DRAM
/* treat .bss and .ncbss as a single section */
.bss (NOLOAD) :
{
_edata = .;
*(.bss*);
} > DRAM
/* align on cache size boundary to avoid mixing cached and noncached stuff */
.ncbss . - CACHED_DRAM_ADDR + UNCACHED_DRAM_ADDR (NOLOAD) :
{
. = ALIGN(CACHEALIGN_SIZE);
*(.ncbss*)
. = ALIGN(CACHEALIGN_SIZE);
} AT> DRAM
.bssendadr . - UNCACHED_DRAM_ADDR + CACHED_DRAM_ADDR (NOLOAD) :
{
_end = .;
} > DRAM
}

13
firmware/target/arm/imx233/crt0.S
View file

@ -33,6 +33,9 @@
ldr pc, =irq_handler
ldr pc, =fiq_handler
/* When starting, we are running at 0x40000000 but the code
* assumes DRAM is somewhere else (for caching) so we first need to
* setup the MMU and then jump to the right location */
.text
.global start
start:
@ -46,6 +49,13 @@ start:
bic r0, r1
mcr p15, 0, r0, c1, c0, 0
/* Enable MMU */
bl memory_init
/* Jump to real location */
ldr pc, =remap
remap:
/* Zero out IBSS */
ldr r2, =_iedata
ldr r3, =_iend
@ -114,9 +124,6 @@ start:
msr cpsr_c, #0xdb
ldr sp, =irq_stack
/* Enable MMU */
bl memory_init
/* Switch back to supervisor mode */
msr cpsr_c, #0xd3

27
firmware/target/arm/imx233/dma-imx233.c
View file

@ -107,7 +107,8 @@ bool imx233_dma_is_channel_error_irq(unsigned chan)
}
/* Commit and/or discard all DMA descriptors and buffers pointed by them,
* handle circular lists */
* handle circular lists. At the same time, convert virtual pointers to
* real ones */
static void imx233_dma_commit_and_discard(struct apb_dma_command_t *cmd)
{
/* We handle circular descriptors by using unused bits:
@ -121,13 +122,15 @@ static void imx233_dma_commit_and_discard(struct apb_dma_command_t *cmd)
{
cur->cmd = (cur->cmd & ~HW_APB_CHx_CMD__UNUSED_BM) | HW_APB_CHx_CMD__UNUSED_MAGIC;
int op = cur->cmd & HW_APB_CHx_CMD__COMMAND_BM;
int sz = (cur->cmd & HW_APB_CHx_CMD__XFER_COUNT_BM) >> HW_APB_CHx_CMD__XFER_COUNT_BP;
int sz = __XTRACT_EX(cur->cmd, HW_APB_CHx_CMD__XFER_COUNT);
/* device > host: discard */
if(op == HW_APB_CHx_CMD__COMMAND__WRITE)
discard_dcache_range(cur->buffer, sz);
/* host > device: commit and discard */
else if(op == HW_APB_CHx_CMD__COMMAND__READ)
commit_discard_dcache_range(cur->buffer, sz);
/* Virtual to physical buffer pointer conversion */
cur->buffer = PHYSICAL_ADDR(cur->buffer);
/* chain ? */
if(cur->cmd & HW_APB_CHx_CMD__CHAIN)
cur = cur->next;
@ -139,16 +142,22 @@ static void imx233_dma_commit_and_discard(struct apb_dma_command_t *cmd)
while((cur->cmd & HW_APB_CHx_CMD__UNUSED_BM) != 0)
{
cur->cmd = cur->cmd & ~HW_APB_CHx_CMD__UNUSED_BM;
int sz = (cur->cmd & HW_APB_CHx_CMD__CMDWORDS_BM) >> HW_APB_CHx_CMD__CMDWORDS_BP;
/* commit descriptor (don't discard since we access it after) */
commit_dcache_range(cur,
sizeof(struct apb_dma_command_t) + sizeof(uint32_t) * sz);
int sz = __XTRACT_EX(cur->cmd, HW_APB_CHx_CMD__CMDWORDS) * sizeof(uint32_t);
/* commit descriptor and discard descriptor */
/* chain ? */
if(cur->cmd & HW_APB_CHx_CMD__CHAIN)
cur = cur->next;
{
struct apb_dma_command_t *next = cur->next;
cur->next = PHYSICAL_ADDR(cur->next);
commit_dcache_range(cur, sizeof(struct apb_dma_command_t) + sz);
cur = next;
}
else
{
commit_dcache_range(cur, sizeof(struct apb_dma_command_t) + sz);
break;
}
}
}
void imx233_dma_start_command(unsigned chan, struct apb_dma_command_t *cmd)
@ -156,12 +165,12 @@ void imx233_dma_start_command(unsigned chan, struct apb_dma_command_t *cmd)
imx233_dma_commit_and_discard(cmd);
if(APB_IS_APBX_CHANNEL(chan))
{
HW_APBX_CHx_NXTCMDAR(APB_GET_DMA_CHANNEL(chan)) = (uint32_t)cmd;
HW_APBX_CHx_NXTCMDAR(APB_GET_DMA_CHANNEL(chan)) = (uint32_t)PHYSICAL_ADDR(cmd);
HW_APBX_CHx_SEMA(APB_GET_DMA_CHANNEL(chan)) = 1;
}
else
{
HW_APBH_CHx_NXTCMDAR(APB_GET_DMA_CHANNEL(chan)) = (uint32_t)cmd;
HW_APBH_CHx_NXTCMDAR(APB_GET_DMA_CHANNEL(chan)) = (uint32_t)PHYSICAL_ADDR(cmd);
HW_APBH_CHx_SEMA(APB_GET_DMA_CHANNEL(chan)) = 1;
}
}

2
firmware/target/arm/imx233/lcdif-imx233.c
View file

@ -79,7 +79,7 @@ void imx233_lcdif_set_word_length(unsigned word_length)
unsigned imx233_lcdif_enable_irqs(unsigned irq_bm)
{
unsigned old_msk = (HW_LCDIF_CTRL1 & HW_LCDIF_CTRL1__IRQ_EN_BM) >>HW_LCDIF_CTRL1__IRQ_EN_BP ;
unsigned old_msk = __XTRACT(HW_LCDIF_CTRL1, IRQ_EN);
/* clear irq status */
__REG_CLR(HW_LCDIF_CTRL1) = irq_bm << HW_LCDIF_CTRL1__IRQ_BP;
/* disable irqs */

15
firmware/target/arm/imx233/mmc-imx233.c
View file

@ -41,9 +41,15 @@
/** When set, this values restrict the windows of the read and writes */
static unsigned mmc_window_start = 0;
static unsigned mmc_window_end = INT_MAX;
static bool mmc_window_enable = true;
static struct mutex mmc_mutex;
void imx233_mmc_disable_window(void)
{
mmc_window_enable = false;
}
int mmc_init(void)
{
mutex_init(&mmc_mutex);
@ -123,6 +129,8 @@ int mmc_init(void)
imx233_ssp_set_timings(MMC_SSP, 2, 0, 0xffff);
#ifdef SANSA_FUZEPLUS
if(mmc_window_enable)
{
/**
* The Fuze+ uses a strange layout: is has a first MBR at sector 0 with four entries:
* 1) Actual user partition
@ -151,6 +159,7 @@ int mmc_init(void)
return -102; /* sigmatel partition */
if((mmc_window_end - mmc_window_start) < 4 * 1024 * 1024)
return -103; /* partition too small */
}
#endif
return 0;
@ -221,3 +230,9 @@ bool mmc_present(IF_MD(int drive))
IF_MD((void) drive);
return true;
}
bool mmc_removable(IF_MD(int drive))
{
IF_MD((void) drive);
return false;
}

24
firmware/target/arm/imx233/power-imx233.c
View file

@ -23,9 +23,33 @@
#include "system.h"
#include "power.h"
#include "system-target.h"
#include "usb-target.h"
void INT_VDD5V(void)
{
if(HW_POWER_CTRL & HW_POWER_CTRL__VBUSVALID_IRQ)
{
if(HW_POWER_STS & HW_POWER_STS__VBUSVALID)
usb_insert_int();
else
usb_remove_int();
/* reverse polarity */
__REG_TOG(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
/* enable int */
__REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__VBUSVALID_IRQ;
}
}
void power_init(void)
{
/* clear vbusvalid irq and set correct polarity */
__REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__VBUSVALID_IRQ;
if(HW_POWER_STS & HW_POWER_STS__VBUSVALID)
__REG_CLR(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
else
__REG_SET(HW_POWER_CTRL) = HW_POWER_CTRL__POLARITY_VBUSVALID;
__REG_SET(HW_POWER_CTRL) = HW_POWER_CTRL__ENIRQ_VBUS_VALID;
imx233_enable_interrupt(INT_SRC_VDD5V, true);
}
void power_off(void)

69
firmware/target/arm/imx233/power-imx233.h Normal file
View file

@ -0,0 +1,69 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2011 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __POWER_IMX233__
#define __POWER_IMX233__
#include "system.h"
#include "system-target.h"
#include "cpu.h"
#define HW_POWER_BASE 0x80044000
#define HW_POWER_CTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x0))
#define HW_POWER_CTRL__ENIRQ_VBUS_VALID (1 << 3)
#define HW_POWER_CTRL__VBUSVALID_IRQ (1 << 4)
#define HW_POWER_CTRL__POLARITY_VBUSVALID (1 << 5)
#define HW_POWER_5VCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x10))
#define HW_POWER_5VCTRL__VBUSVALID_5VDETECT (1 << 4)
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_BP 8
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_BM (0x7 << 8)
#define HW_POWER_MINPWR (*(volatile uint32_t *)(HW_POWER_BASE + 0x20))
#define HW_POWER_CHARGE (*(volatile uint32_t *)(HW_POWER_BASE + 0x30))
#define HW_POWER_VDDDCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x40))
#define HW_POWER_VDDDCTRL__TRG_BP 0
#define HW_POWER_VDDDCTRL__TRG_BM 0x1f
#define HW_POWER_VDDDCTRL__TRG_STEP 25 /* mV */
#define HW_POWER_VDDDCTRL__TRG_MIN 800 /* mV */
#define HW_POWER_VDDACTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x50))
#define HW_POWER_VDDIOCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x60))
#define HW_POWER_VDDMEMCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x70))
#define HW_POWER_MISC (*(volatile uint32_t *)(HW_POWER_BASE + 0x90))
#define HW_POWER_STS (*(volatile uint32_t *)(HW_POWER_BASE + 0xc0))
#define HW_POWER_STS__VBUSVALID (1 << 1)
#define HW_POWER_STS__PSWITCH_BP 20
#define HW_POWER_STS__PSWITCH_BM (3 << 20)
#define HW_POWER_BATTMONITOR (*(volatile uint32_t *)(HW_POWER_BASE + 0xe0))
#define HW_POWER_RESET (*(volatile uint32_t *)(HW_POWER_BASE + 0x100))
#define HW_POWER_RESET__UNLOCK 0x3E770000
#define HW_POWER_RESET__PWD 0x1
#endif /* __POWER_IMX233__ */

2
firmware/target/arm/imx233/sansa-fuzeplus/lcd-fuzeplus.c
View file

@ -509,7 +509,7 @@ void lcd_update(void)
imx233_lcdif_set_data_format(false, false, false); /* RGB565, don't care, don't care */
lcd_copy_buffer_rect((fb_data *)FRAME, &lcd_framebuffer[0][0],
LCD_WIDTH * LCD_HEIGHT, 1);
imx233_lcdif_dma_send(FRAME, LCD_WIDTH, LCD_HEIGHT);
imx233_lcdif_dma_send((void *)FRAME_PHYS_ADDR, LCD_WIDTH, LCD_HEIGHT);
}
void lcd_update_rect(int x, int y, int width, int height)

6
firmware/target/arm/imx233/sd-imx233.c
View file

@ -227,3 +227,9 @@ bool sd_present(IF_MD(int drive))
return imx233_ssp_sdmmc_detect(SD_SSP);
}
bool sd_removable(IF_MD(int drive))
{
IF_MD((void) drive);
return true;
}

8
firmware/target/arm/imx233/system-imx233.c
View file

@ -57,6 +57,7 @@ default_interrupt(INT_I2C_ERROR);
default_interrupt(INT_GPIO0);
default_interrupt(INT_GPIO1);
default_interrupt(INT_GPIO2);
default_interrupt(INT_VDD5V);
typedef void (*isr_t)(void);
@ -78,6 +79,7 @@ static isr_t isr_table[INT_SRC_NR_SOURCES] =
[INT_SRC_GPIO0] = INT_GPIO0,
[INT_SRC_GPIO1] = INT_GPIO1,
[INT_SRC_GPIO2] = INT_GPIO2,
[INT_SRC_VDD5V] = INT_VDD5V,
};
static void UIRQ(void)
@ -147,10 +149,8 @@ static void set_page_tables(void)
map_section(0, 0, 0x1000, CACHE_NONE);
/* map RAM and enable caching for it */
map_section(DRAM_ORIG, DRAM_ORIG, MEMORYSIZE, CACHE_ALL);
/* enable buffered writing for the framebuffer */
map_section((int)FRAME, (int)FRAME, 1, BUFFERED);
map_section(DRAM_ORIG, CACHED_DRAM_ADDR, MEMORYSIZE, CACHE_ALL);
map_section(DRAM_ORIG, BUFFERED_DRAM_ADDR, MEMORYSIZE, BUFFERED);
}
void memory_init(void)

36
firmware/target/arm/imx233/system-target.h
View file

@ -26,44 +26,11 @@
#include "panic.h"
#include "clock-target.h" /* CPUFREQ_* are defined here */
#include "power-imx233.h"
#define HW_DIGCTL_BASE 0x8001C000
#define HW_DIGCTL_MICROSECONDS (*(volatile uint32_t *)(HW_DIGCTL_BASE + 0xC0))
#define HW_POWER_BASE 0x80044000
#define HW_POWER_CTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x0))
#define HW_POWER_5VCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x10))
#define HW_POWER_MINPWR (*(volatile uint32_t *)(HW_POWER_BASE + 0x20))
#define HW_POWER_CHARGE (*(volatile uint32_t *)(HW_POWER_BASE + 0x30))
#define HW_POWER_VDDDCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x40))
#define HW_POWER_VDDDCTRL__TRG_BP 0
#define HW_POWER_VDDDCTRL__TRG_BM 0x1f
#define HW_POWER_VDDDCTRL__TRG_STEP 25 /* mV */
#define HW_POWER_VDDDCTRL__TRG_MIN 800 /* mV */
#define HW_POWER_VDDACTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x50))
#define HW_POWER_VDDIOCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x60))
#define HW_POWER_VDDMEMCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x70))
#define HW_POWER_MISC (*(volatile uint32_t *)(HW_POWER_BASE + 0x90))
#define HW_POWER_STS (*(volatile uint32_t *)(HW_POWER_BASE + 0xc0))
#define HW_POWER_STS__PSWITCH_BP 20
#define HW_POWER_STS__PSWITCH_BM (3 << 20)
#define HW_POWER_BATTMONITOR (*(volatile uint32_t *)(HW_POWER_BASE + 0xe0))
#define HW_POWER_RESET (*(volatile uint32_t *)(HW_POWER_BASE + 0x100))
#define HW_POWER_RESET__UNLOCK 0x3E770000
#define HW_POWER_RESET__PWD 0x1
#define HW_ICOLL_BASE 0x80000000
#define HW_ICOLL_VECTOR (*(volatile uint32_t *)(HW_ICOLL_BASE + 0x0))
@ -83,6 +50,7 @@
#define HW_ICOLL_INTERRUPT__ENFIQ 0x10
#define INT_SRC_SSP2_ERROR 2
#define INT_SRC_VDD5V 3
#define INT_SRC_USB_CTRL 11
#define INT_SRC_SSP1_DMA 14
#define INT_SRC_SSP1_ERROR 15

17
firmware/target/arm/imx233/usb-imx233.c
View file

@ -29,10 +29,20 @@
#include "system.h"
#include "system-target.h"
int usb_status = USB_EXTRACTED;
void usb_insert_int(void)
{
usb_status_event(USB_POWERED);
}
void usb_remove_int(void)
{
usb_status_event(USB_UNPOWERED);
}
void usb_drv_usb_detect_event()
{
printf("usb_drv_usb_detect_event");
usb_status_event(USB_INSERTED);
}
@ -58,16 +68,17 @@ void usb_init_device(void)
int usb_detect(void)
{
return usb_status;
return usb_plugged() ? USB_INSERTED : USB_EXTRACTED;
}
bool usb_plugged(void)
{
return true;
return !!(HW_POWER_STS & HW_POWER_STS__VBUSVALID);
}
void usb_enable(bool on)
{
/* FIXME: power up/down usb phy and pll usb */
if(on)
usb_core_init();
else

36
firmware/target/arm/imx233/usb-target.h Normal file
View file

@ -0,0 +1,36 @@
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2011 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef USB_TARGET_H
#define USB_TARGET_H
#include "config.h"
#ifdef HAVE_BOOTLOADER_USB_MODE
#define USB_DRIVER_CLOSE
#endif
void usb_init_device(void);
int usb_detect(void);
void usb_insert_int(void);
void usb_remove_int(void);
bool usb_plugged(void);
#endif /* USB_TARGET_H */