2011-05-01 13:02:46 +00:00
|
|
|
/***************************************************************************
|
|
|
|
* __________ __ ___.
|
|
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
|
|
* \/ \/ \/ \/ \/
|
|
|
|
* $Id$
|
|
|
|
*
|
|
|
|
* Copyright © 2011 by Amaury Pouly
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
|
|
* KIND, either express or implied.
|
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
#ifndef CLKCTRL_IMX233_H
|
|
|
|
#define CLKCTRL_IMX233_H
|
|
|
|
|
|
|
|
#include "config.h"
|
|
|
|
#include "system.h"
|
|
|
|
#include "cpu.h"
|
|
|
|
|
imx233: generate register headers using headergen_v2 and update code for it
NOTE: this commit does not introduce any change, ideally even the binary should
be almost the same. I checked the disassembly by hand and there are only a few
differences here and there, mostly the compiler decides to compile very close
expressions slightly differently. I tried to run the new code on several targets
to make sure and saw no difference.
The major syntax changes of the new headers are as follows:
- BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once:
BF_WR(reg, field1(value1), field2(value2), ...)
- BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW
- there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply
BF_WR with field_V(name)
- the old BF_SETV macro has no trivial equivalent and is replaced with its
its equivalent for BF_WR(reg_SET, ...)
I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the
redundant "regs".
Final note: the registers were generated using the following command:
./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml
Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
2016-05-24 19:29:56 +00:00
|
|
|
#include "regs/clkctrl.h"
|
2011-05-01 13:02:46 +00:00
|
|
|
|
2011-12-26 17:09:09 +00:00
|
|
|
static inline void core_sleep(void)
|
|
|
|
{
|
imx233: generate register headers using headergen_v2 and update code for it
NOTE: this commit does not introduce any change, ideally even the binary should
be almost the same. I checked the disassembly by hand and there are only a few
differences here and there, mostly the compiler decides to compile very close
expressions slightly differently. I tried to run the new code on several targets
to make sure and saw no difference.
The major syntax changes of the new headers are as follows:
- BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once:
BF_WR(reg, field1(value1), field2(value2), ...)
- BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW
- there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply
BF_WR with field_V(name)
- the old BF_SETV macro has no trivial equivalent and is replaced with its
its equivalent for BF_WR(reg_SET, ...)
I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the
redundant "regs".
Final note: the registers were generated using the following command:
./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml
Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
2016-05-24 19:29:56 +00:00
|
|
|
BF_WR(CLKCTRL_CPU, INTERRUPT_WAIT(1));
|
2011-12-26 17:09:09 +00:00
|
|
|
asm volatile (
|
|
|
|
"mcr p15, 0, %0, c7, c0, 4 \n" /* Wait for interrupt */
|
|
|
|
"nop\n" /* Datasheet unclear: "The lr sent to handler points here after RTI"*/
|
2013-06-16 13:28:04 +00:00
|
|
|
"nop\n"
|
2011-12-26 17:09:09 +00:00
|
|
|
: : "r"(0)
|
|
|
|
);
|
|
|
|
enable_irq();
|
|
|
|
}
|
|
|
|
|
2011-05-01 13:02:46 +00:00
|
|
|
enum imx233_clock_t
|
|
|
|
{
|
2011-12-03 15:34:40 +00:00
|
|
|
CLK_SSP, /* freq, div, bypass, enable */
|
2013-06-16 18:54:41 +00:00
|
|
|
CLK_IO, /* freq, frac (stmp3700+) */
|
2011-12-03 15:34:40 +00:00
|
|
|
CLK_CPU, /* freq, div, frac, bypass */
|
|
|
|
CLK_HBUS, /* freq, div, frac */
|
2012-05-21 14:28:12 +00:00
|
|
|
CLK_PLL, /* freq, enable */
|
2011-12-03 15:34:40 +00:00
|
|
|
CLK_XTAL, /* freq */
|
2012-12-26 00:06:04 +00:00
|
|
|
CLK_EMI, /* freq, div, frac, bypass */
|
2011-12-03 15:34:40 +00:00
|
|
|
CLK_XBUS, /* freq, div */
|
2013-06-16 18:08:49 +00:00
|
|
|
CLK_FILT, /* enable */
|
|
|
|
CLK_DRI, /* enable */
|
|
|
|
CLK_PWM, /* enable */
|
|
|
|
CLK_TIMROT, /* enable */
|
|
|
|
CLK_UART, /* enable */
|
2013-06-16 18:54:41 +00:00
|
|
|
#if IMX233_SUBTARGET >= 3700
|
|
|
|
CLK_PIX, /* freq, div, frac, bypass, enable */
|
|
|
|
#endif
|
2011-05-01 13:02:46 +00:00
|
|
|
};
|
|
|
|
|
2013-06-16 18:08:49 +00:00
|
|
|
void imx233_clkctrl_init(void);
|
2011-06-17 22:30:58 +00:00
|
|
|
/* only use it for non-fractional clocks (ie not for IO) */
|
2013-06-16 18:08:49 +00:00
|
|
|
void imx233_clkctrl_enable(enum imx233_clock_t clk, bool enable);
|
|
|
|
bool imx233_clkctrl_is_enabled(enum imx233_clock_t cl);
|
|
|
|
void imx233_clkctrl_set_div(enum imx233_clock_t clk, int div);
|
|
|
|
int imx233_clkctrl_get_div(enum imx233_clock_t clk);
|
2013-06-16 18:54:41 +00:00
|
|
|
#if IMX233_SUBTARGET >= 3700
|
2011-06-17 22:30:58 +00:00
|
|
|
/* call with fracdiv=0 to disable it */
|
2013-06-16 18:08:49 +00:00
|
|
|
void imx233_clkctrl_set_frac_div(enum imx233_clock_t clk, int fracdiv);
|
2011-12-03 15:34:40 +00:00
|
|
|
/* 0 means fractional dividor disable */
|
2013-06-16 18:08:49 +00:00
|
|
|
int imx233_clkctrl_get_frac_div(enum imx233_clock_t clk);
|
|
|
|
void imx233_clkctrl_set_bypass(enum imx233_clock_t clk, bool bypass);
|
|
|
|
bool imx233_clkctrl_get_bypass(enum imx233_clock_t clk);
|
2014-03-08 17:49:13 +00:00
|
|
|
/* all-in-one function which handle all quirks */
|
|
|
|
void imx233_clkctrl_set_cpu_hbus_div(int cpu_idiv, int cpu_fdiv, int hbus_div);
|
2013-06-16 18:54:41 +00:00
|
|
|
#endif
|
2013-06-16 18:08:49 +00:00
|
|
|
void imx233_clkctrl_enable_usb(bool enable);
|
|
|
|
bool imx233_clkctrl_is_usb_enabled(void);
|
|
|
|
/* returns frequency in KHz */
|
|
|
|
unsigned imx233_clkctrl_get_freq(enum imx233_clock_t clk);
|
|
|
|
/* auto-slow stuff */
|
|
|
|
void imx233_clkctrl_set_auto_slow_div(unsigned div);
|
|
|
|
unsigned imx233_clkctrl_get_auto_slow_div(void);
|
2012-05-19 11:16:17 +00:00
|
|
|
void imx233_clkctrl_enable_auto_slow(bool enable);
|
|
|
|
bool imx233_clkctrl_is_auto_slow_enabled(void);
|
2011-05-01 13:02:46 +00:00
|
|
|
|
|
|
|
#endif /* CLKCTRL_IMX233_H */
|