rockbox/firmware/target/arm/s3c2440/lcd-s3c2440.c

/***************************************************************************
*             __________               __   ___.
*   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
*   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
*   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
*   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
*                     \/            \/     \/    \/            \/
* $Id$
*
* Copyright (C) 2007 by Greg White
* Copyright (C) 2009 by Bob Cousins
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/ 

#include "config.h"
#include "system.h"
#include "kernel.h"
#include "lcd.h"
#include "lcd-target.h"

extern bool lcd_on; /* lcd-memframe.c */

#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
static bool lcd_powered = true;
#endif

static unsigned int LCDBANK(unsigned int address)
{
    return ((address >> 22) & 0xff);
}

static unsigned int LCDBASEU(unsigned int address)
{
    return (address & ((1 << 22)-1)) >> 1;
}

static unsigned int LCDBASEL(unsigned int address)
{
    address += 320*240*2;
    return (address & ((1 << 22)-1)) >> 1;
}

static inline void delay_cycles(volatile int delay)
{
    while(delay>0) delay--;
}

static void LCD_CTRL_setup(void)
{
    LCDCON1 = (LCD_CLKVAL << 8) | (LCD_MMODE << 7) | (LCD_PNRMODE << 5) | 
                (LCD_BPPMODE << 1);  
    LCDCON2 = (LCD_UPPER_MARGIN << 24) | ((LCD_HEIGHT - 1) << 14) | 
                (LCD_LOWER_MARGIN << 6) | (LCD_VSYNC_LEN << 0);
    LCDCON3 = (LCD_LEFT_MARGIN << 19) | ((LCD_WIDTH  - 1) <<  8) | 
                (LCD_RIGHT_MARGIN << 0);
    LCDCON4 = (LCD_HSYNC_LEN << 0);

    /* HWSWP = 1, INVVFRAM = 1, INVVLINE = 1, FRM565 = 1, All others = 0 */
    LCDCON5 = 0xB01;

    LCDSADDR1 = (LCDBANK((unsigned)FRAME) << 21) | (LCDBASEU((unsigned)FRAME));
    LCDSADDR2 = LCDBASEL((unsigned)FRAME);
    LCDSADDR3 = 0x000000F0;
}

static void LCD_CTRL_clock(bool onoff)
{
    if(onoff)
    {
        GPCCON  &=~0xFFF000FC;
        GPCCON  |= 0xAAA000A8;
        GPCUP   |= 0xFC0E;

        GPDCON  &=~0xFFF0FFF0;
        GPDCON  |= 0xAAA0AAA0;
        GPDUP   |= 0xFCFC;

        bitset32(&CLKCON, 0x20);  /* enable LCD clock */
        LCDCON1 |= LCD_ENVID;
    }
    else
    {
        GPCCON  &= ~0xFFF000FC;
        GPCUP   &= ~0xFC0E;

        GPDCON  &= ~0xFFF0FFF0;
        GPDUP   &= ~0xFCFC;

        LCDCON1 &= ~LCD_ENVID;        /* Must disable first or bus may freeze */
        bitclr32(&CLKCON, 0x20);  /* disable LCD clock */
    }
}

#ifdef GIGABEAT_F
static void reset_LCD(bool reset)
{
    GPBCON&=~0xC000;
    GPBCON|=0x4000;
    if(reset)
        GPBDAT|=0x80;
    else
        GPBDAT&=~0x80;
}
#endif


/****************************************************************************/
#ifdef GIGABEAT_F
static void LCD_SPI_send(const unsigned char *array, int count)
{
    while (count--)
    {
        while ((SPSTA0&0x01)==0){};
        SPTDAT0=*array++;
    }
}

static void LCD_SPI_setreg(unsigned char reg, unsigned char value)
{
    unsigned char regval[] =
    {
        0x00,reg,0x01,value
    };
    LCD_SPI_send(regval, sizeof(regval));
}

static void LCD_SPI_SS(bool select)
{
    delay_cycles(0x4FFF);

    GPBCON&=~0x30000;
    GPBCON|=0x10000;

    if(select)
        GPBDAT|=0x100;
    else
        GPBDAT&=~0x100;
}

static void LCD_SPI_start(void)
{
    bitset32(&CLKCON, 0x40000);   /* enable SPI clock */
    LCD_SPI_SS(false);
    SPCON0=0x3E;
    SPPRE0=24;

    reset_LCD(true);
    LCD_SPI_SS(true);
}

static void LCD_SPI_stop(void)
{
    LCD_SPI_SS(false);

    SPCON0 &= ~0x10;
    bitclr32(&CLKCON, 0x40000);    /* disable SPI clock */
}

static void LCD_SPI_init(void)
{
    /*
     * SPI setup - Some of these registers are known; they are documented in
     *  the wiki.  Many thanks to Alex Gerchanovsky for discovering this
     *  sequence.
     */

    LCD_CTRL_clock(true);

    LCD_SPI_start();
    LCD_SPI_setreg(0x0F, 0x01);
    LCD_SPI_setreg(0x09, 0x06);
    LCD_SPI_setreg(0x16, 0xA6);
    LCD_SPI_setreg(0x1E, 0x49);
    LCD_SPI_setreg(0x1F, 0x26);
    LCD_SPI_setreg(0x0B, 0x2F);
    LCD_SPI_setreg(0x0C, 0x2B);
    LCD_SPI_setreg(0x19, 0x5E);
    LCD_SPI_setreg(0x1A, 0x15);
    LCD_SPI_setreg(0x1B, 0x15);
    LCD_SPI_setreg(0x1D, 0x01);
    LCD_SPI_setreg(0x00, 0x03);
    LCD_SPI_setreg(0x01, 0x10);
    LCD_SPI_setreg(0x02, 0x0A);
    LCD_SPI_setreg(0x06, 0x04); /* Set the orientation */
    LCD_SPI_setreg(0x08, 0x2E);
    LCD_SPI_setreg(0x24, 0x12);
    LCD_SPI_setreg(0x25, 0x3F);
    LCD_SPI_setreg(0x26, 0x0B);
    LCD_SPI_setreg(0x27, 0x00);
    LCD_SPI_setreg(0x28, 0x00);
    LCD_SPI_setreg(0x29, 0xF6);
    LCD_SPI_setreg(0x2A, 0x03);
    LCD_SPI_setreg(0x2B, 0x0A);
    LCD_SPI_setreg(0x04, 0x01); /* Turn the display on */
    LCD_SPI_stop();
}
#endif
/****************************************************************************/

/* LCD init */
void lcd_init_device(void)
{
#ifdef BOOTLOADER
    int i;
    /* When the Rockbox bootloader starts the framebuffer address is changed
     * but the LCD display should stay the same til an lcd_update() occurs.
     * This copies the data from the old framebuffer to the new one to make the
     * change non-visable to the user.
     */
    unsigned short *buf     = (unsigned short*)(FRAME);
    unsigned short *oldbuf  = (unsigned short*)(LCDSADDR1<<1);

    /* The Rockbox bootloader is transitioning from RGB555I to RGB565 mode
       so convert the frambuffer data accordingly */
    for(i=0; i< 320*240; i++)
    {
        *(buf++) = ((*oldbuf>>1) & 0x1F) | (*oldbuf & 0xffc0);
        oldbuf++;
    }
#endif

    /* Set pins up */
    GPHUP   &= 0x600;
    GPECON  |= 0x0A800000;
    GPEUP   |= 0x3800;
#ifdef GIGABEAT_F
    GPBUP   |= 0x181;
#endif

    bitset32(&CLKCON, 0x20);  /* enable LCD clock */

    LCD_CTRL_setup();
#ifdef GIGABEAT_F
    LCD_SPI_init();
#else
    LCD_CTRL_clock(true);
#endif

    lcd_on = true;
}

#if defined(HAVE_LCD_SLEEP)
static void LCD_SPI_powerdown(void)
{
    lcd_powered = false;

    LCD_SPI_start();
    LCD_SPI_setreg(0x04, 0x00);
    LCD_SPI_stop();

    reset_LCD(false);   /* This makes a big difference on power */
    LCD_CTRL_clock(false);
}

void lcd_sleep(void)
{
    if (lcd_powered)
    {
        /* "not powered" implies "disabled" */
        lcd_enable(false);
        LCD_SPI_powerdown();
    }
}
#endif

#if defined(HAVE_LCD_ENABLE)
static void LCD_SPI_powerup(void)
{
    LCD_CTRL_clock(true);

    LCD_SPI_start();
    LCD_SPI_setreg(0x04, 0x01);
    LCD_SPI_stop();

    lcd_powered = true;
}

void lcd_enable(bool state)
{
    if (state == lcd_on)
        return;

    if(state)
    {
        /* "enabled" implies "powered" */
        if (!lcd_powered)
        {
            LCD_SPI_powerup();
            /* Wait long enough for a frame to be written - yes, it
             * takes awhile. */
            sleep(HZ/5);
        }

        lcd_on = true;
        lcd_update();
        send_event(LCD_EVENT_ACTIVATION, NULL);
    }
    else
    {
        lcd_on = false;
    }
}
#endif

#ifdef GIGABEAT_F
void lcd_set_flip(bool yesno)
{
    if (!lcd_on)
        return;

    LCD_SPI_start();
    if(yesno)
    {
        LCD_SPI_setreg(0x06, 0x02);
    }
    else
    {
        LCD_SPI_setreg(0x06, 0x04);
    }
    LCD_SPI_stop();
}

int lcd_default_contrast(void)
{
    return DEFAULT_CONTRAST_SETTING;
}

void lcd_set_contrast(int val)
{
    if (!lcd_on)
        return;

    LCD_SPI_start();
    LCD_SPI_setreg(0x0B, (unsigned char) val);
    LCD_SPI_stop();
}

void lcd_set_invert_display(bool yesno)
{
    if (!lcd_on)
        return;

    LCD_SPI_start();
    if(yesno)
    {
        LCD_SPI_setreg(0x27, 0x10);
    }
    else
    {
        LCD_SPI_setreg(0x27, 0x00);
    }
    LCD_SPI_stop();
}
#else
void lcd_set_flip(bool yesno) 
{
    (void)yesno;
    /* Not implemented */
}

int lcd_default_contrast(void)
{
    return DEFAULT_CONTRAST_SETTING;
}

void lcd_set_contrast(int val) 
{
    (void)val;
    /* Not implemented */
}

void lcd_set_invert_display(bool yesno) 
{
    (void)yesno;
    /* Not implemented */
}

#endif