rockbox/firmware/target/coldfire/iriver/h100/lcd-as-h100.S

97 lines
2.7 KiB
ArmAsm
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2004 by Jens Arnold
* Based on the work of Alan Korr and J<EFBFBD>rg Hohensohn
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
.section .icode,"ax",@progbits
.align 2
.global lcd_write_command
.type lcd_write_command,@function
lcd_write_command:
move.l (4,%sp),%d0
lea MBAR2,%a1
move.l #~8,%d1
and.l %d1,(0xb4,%a1)
move.w %d0,0xf0000000
rts
.wc_end:
.size lcd_write_command,.wc_end-lcd_write_command
.align 2
.global lcd_write_command_ex
.type lcd_write_command_ex,@function
lcd_write_command_ex:
lea MBAR2,%a1
move.l (4,%sp),%d0 /* Command */
move.l #~8,%d1 /* Set A0 = 0 */
and.l %d1,(0xb4,%a1)
move.w %d0,0xf0000000 /* Write to LCD */
not.l %d1 /* Set A0 = 1 */
or.l %d1,(0xb4,%a1)
move.l (8,%sp),%d0 /* Data */
cmp.l #0xffffffff,%d0 /* -1? */
beq.b .last
move.w %d0,0xf0000000 /* Write to LCD */
move.l (12,%sp),%d0 /* Data */
cmp.l #0xffffffff,%d0 /* -1? */
beq.b .last
move.w %d0,0xf0000000 /* Write to LCD */
.last:
rts
.wcex_end:
.size lcd_write_command_ex,.wcex_end-lcd_write_command_ex
.align 2
.global lcd_write_data
.type lcd_write_data,@function
lcd_write_data:
move.l (4,%sp),%a0 /* Data pointer */
move.l (8,%sp),%d0 /* Length */
lea MBAR2,%a1
moveq #8,%d1
or.l %d1,(0xb4,%a1)
lea 0xf0000000,%a1
.loop:
/* When running in IRAM, this loop takes 7 cycles plus the LCD write.
The 7 cycles are necessary to follow the LCD timing specs
at 140MHz */
move.b (%a0)+,%d1 /* 3(1/0) */
move.w %d1,(%a1) /* 1(0/1) */
subq.l #1,%d0 /* 1(0/0) */
nop /* 1(0/0) */
bne .loop /* 2(0/0) */
rts
.wd_end:
.size lcd_write_data,.wd_end-lcd_write_data