rockbox/firmware/target/arm/tms320dm320/sansa-connect/pcm-sansaconnect.c

205 lines
5.2 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: $
*
* Copyright (C) 2011 by Tomasz Moń
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdlib.h>
#include "system.h"
#include "kernel.h"
#include "logf.h"
#include "audio.h"
#include "sound.h"
#include "file.h"
#include "dsp-target.h"
#include "dsp/ipc.h"
#include "mmu-arm.h"
#include "pcm-internal.h"
#include "dma-target.h"
/* This is global to save some latency when pcm_play_dma_get_peak_buffer is
* called.
*/
static void *start;
static int dma_channel;
void pcm_play_dma_postinit(void)
{
audiohw_postinit();
}
/* Return the current location in the SDRAM to SARAM transfer along with the
* number of bytes read in the current buffer (count). There is latency with
* this method equivalent to ~ the size of the SARAM buffer since there is
* another buffer between your ears and this calculation, but this works for
* key clicks and an approximate peak meter.
*/
const void * pcm_play_dma_get_peak_buffer(int *count)
{
int cnt = DSP_(_sdem_level);
unsigned long addr = (unsigned long) start + cnt;
*count = (cnt & 0xFFFFF) >> 1;
return (void *)((addr + 2) & ~3);
}
void pcm_play_dma_init(void)
{
/* GIO16 is DSP/AIC3X CLK */
IO_GIO_FSEL0 &= 0x3FFF;
IO_CLK_OSEL = (IO_CLK_OSEL & 0xFFF0) | 4; /* PLLIN clock */
IO_CLK_O0DIV = 7;
IO_GIO_DIR1 &= ~(1 << 0); /* GIO16 - output */
IO_GIO_FSEL0 |= 0xC000; /* GIO16 - CLKOUT0 */
audiohw_init();
audiohw_set_frequency(HW_FREQ_DEFAULT);
IO_INTC_IRQ0 = INTR_IRQ0_IMGBUF;
bitset16(&IO_INTC_EINT0, INTR_EINT0_IMGBUF);
/* Set this as a FIQ */
bitset16(&IO_INTC_FISEL0, INTR_EINT0_IMGBUF);
/* Enable the HPIB clock */
bitset16(&IO_CLK_MOD0, (CLK_MOD0_HPIB | CLK_MOD0_DSP));
dma_channel = dma_request_channel(DMA_PERIPHERAL_DSP,
DMA_MODE_1_BURST);
IO_DSPC_HPIB_CONTROL = 1 << 10 | 1 << 9 | 1 << 8 | 1 << 7 | 1 << 3 | 1 << 0;
dsp_reset();
dsp_load(dsp_image);
DSP_(_dma0_stopped)=1;
dsp_wake();
}
void pcm_dma_apply_settings(void)
{
audiohw_set_frequency(pcm_fsel);
}
/* Note that size is actually limited to the size of a short right now due to
* the implementation on the DSP side (and the way that we access it)
*/
void pcm_play_dma_start(const void *addr, size_t size)
{
unsigned long sdem_addr=(unsigned long)addr - CONFIG_SDRAM_START;
/* Initialize codec. */
DSP_(_sdem_addrl) = sdem_addr & 0xffff;
DSP_(_sdem_addrh) = sdem_addr >> 16;
DSP_(_sdem_dsp_size) = size;
DSP_(_dma0_stopped)=0;
dsp_wake();
}
void pcm_play_dma_stop(void)
{
DSP_(_dma0_stopped)=1;
dsp_wake();
}
void pcm_play_lock(void)
{
}
void pcm_play_unlock(void)
{
}
void pcm_play_dma_pause(bool pause)
{
if (pause)
{
DSP_(_dma0_stopped)=2;
dsp_wake();
}
else
{
DSP_(_dma0_stopped)=0;
dsp_wake();
}
}
size_t pcm_get_bytes_waiting(void)
{
return DSP_(_sdem_dsp_size)-DSP_(_sdem_level);
}
/* Only used when debugging */
static char buffer[80];
void DSPHINT(void) __attribute__ ((section(".icode")));
void DSPHINT(void)
{
unsigned int i;
size_t size;
IO_INTC_FIQ0 = INTR_IRQ0_IMGBUF;
switch (dsp_message.msg)
{
case MSG_DEBUGF:
/* DSP stores one character per word. */
for (i = 0; i < sizeof(buffer); i++)
{
buffer[i] = dsp_message.payload.debugf.buffer[i];
}
DEBUGF("DSP: %s", buffer);
break;
case MSG_REFILL:
/* Buffer empty. Try to get more. */
pcm_play_get_more_callback(&start, &size);
if (size != 0)
{
unsigned long sdem_addr=(unsigned long)start - CONFIG_SDRAM_START;
/* Flush any pending cache writes */
commit_dcache_range(start, size);
/* set the new DMA values */
DSP_(_sdem_addrl) = sdem_addr & 0xffff;
DSP_(_sdem_addrh) = sdem_addr >> 16;
DSP_(_sdem_dsp_size) = size;
DEBUGF("pcm_sdram at 0x%08lx, sdem_addr 0x%08lx",
(unsigned long)start, (unsigned long)sdem_addr);
pcm_play_dma_started_callback();
}
break;
default:
DEBUGF("DSP: unknown msg 0x%04x", dsp_message.msg);
break;
}
/* Re-Activate the channel */
dsp_wake();
DEBUGF("DSP: %s", buffer);
}