rockbox/firmware/export/config/sansafuzeplus.h

221 lines
6.1 KiB
C
Raw Normal View History

/*
* This config file is for the Sandisk Sansa Fuze+
*/
#define IMX233_SUBTARGET 3780
#define IMX233_PACKAGE IMX233_BGA169
#define IMX233_PARTITIONS IMX233_FREESCALE
/* For Rolo and boot loader */
#define MODEL_NUMBER 72
#define MODEL_NAME "Sandisk Sansa Fuze+"
/* Define if boot data from bootloader has been enabled for the target */
#define HAVE_BOOTDATA
Add boot from other volumes in bootloader on targets with HAVE_MULTIVOLUME Adds the ability to load firmware from other drives on MULTIVOLUME targets Mihail Zenkov <mihail.zenkov@gmail.com> had posted a hard coded patch to allow this on several Sansa players, I made it more universal Redirect file rockbox_main.<name> should placed in root of drive you would like to be main, if this file empty or there a single slash '/' firmware will be loaded from /.rockbox in root of this drive If instead a /<*DIRECTORY*> is supplied in rockbox_main.<name> then firmware will be loaded from /<dir>/.rockbox/ NOTES* The directory can have multiple levels however.. leading slash MUST be included trailing slash can be omitted (eg. /test/.rockbox would be simply '/test' in the redirect file) Redirect file will not work on internal drive (whatever is default boot drive) Volume with the highest index containing redirect file will be loaded first. Firmware file is checked for boot data region, if missing, firmware image will not be loaded. On failure or if no redirect file is found load will fallback to internal drive Currently only Sansa Fuze+, Sansa Clip+, Sansa Clip Zip, Sansa Fuzev2, and Sansa Fuzev1 are implemented. Players (with HAVE_MULTIVOLUME) will need #define HAVE_BOOTDATA and #define BOOT_REDIR "rockbox_main.<name>" added to their config file boot_data is implemented in crt0.s file (See g#1552) ARM and IMX233 have aleady been implemented Once these conditions are met <HAVE_MULTIBOOT> will be defined by config.h Partitions on the drives are able to have a redirect as well. Change-Id: Iada3263919f6bcad7d0d7d8279b4239aafa07ee9
2017-02-10 12:53:46 +00:00
/* define boot redirect file name allows booting from external drives */
#define BOOT_REDIR "rockbox_main.fuze+"
// HW can do it but we don't have the IRAM for mix buffers
//#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_48
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS SAMPR_CAP_ALL_96
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
#define HAVE_LCD_FLIP
#define HAVE_LCD_INVERT
#ifndef BOOTLOADER
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_IMX233
/* define this if you have a real-time clock with alarm facilities */
#define HAVE_RTC_ALARM
#endif /* !BOOTLOADER */
/* define this if you have an i.MX23 codec */
#define HAVE_IMX233_CODEC
#define CONFIG_TUNER SI4700
#define HAVE_RDS_CAP
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
#define CONFIG_KEYPAD SANSA_FUZEPLUS_PAD
#define HAVE_TOUCHPAD
#define HAVE_TOUCHPAD_SENSITIVITY_SETTING
#define MIN_TOUCHPAD_SENSITIVITY_SETTING -25
#define MAX_TOUCHPAD_SENSITIVITY_SETTING 25
#define DEFAULT_TOUCHPAD_SENSITIVITY_SETTING 13
/* Define this to enable dead zone on touchpad */
#ifndef SIMULATOR
#define HAVE_TOUCHPAD_DEADZONE
#define DEFAULT_TOUCHPAD_DEADZONE_SETTING 30
#define MIN_TOUCHPAD_DEADSPACE_SETTING 0
#define MAX_TOUCHPAD_DEADSPACE_SETTING 100
#endif
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* LCD dimensions */
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
/* sqrt(240^2 + 320^2) / 2.4 = 166.7 */
#define LCD_DPI 167
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Some Sansa Fuzes seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
//#define AB_REPEAT_ENABLE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 0
#define MAX_BRIGHTNESS_SETTING 32
#define DEFAULT_BRIGHTNESS_SETTING 16
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE (STORAGE_SD | STORAGE_MMC)
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
/* Extra threads: touchpad and rds */
#define TARGET_EXTRA_THREADS 2
/* todo */
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have an IMX233*/
#define CONFIG_CPU IMX233
/* Define this if you want to use the IMX233 i2c interface */
#define CONFIG_I2C I2C_IMX233
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* define current usage levels (based on battery bench) */
#define CURRENT_NORMAL 35
#define CURRENT_BACKLIGHT 30
#define CURRENT_RECORD CURRENT_NORMAL
/* maximum charging current */
#define CURRENT_MAX_CHG 200
/* Define this to the CPU frequency */
#define CPU_FREQ 454000000
/* Type of LCD */
#define CONFIG_LCD LCD_FUZEPLUS
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_EXTRA_STACK 0x80
//#define USB_HANDLED_BY_OF
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74e1
#define HAVE_USB_HID_MOUSE
#define HAVE_BOOTLOADER_USB_MODE
/* The fuze+ actually interesting partition table does not use 512-byte sector
* (usually 2048 logical sector size) */
#define MAX_LOG_SECTOR_SIZE 2048
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
/* Define this on iMX233 if the boot process uses a dualboot stub */
#define HAVE_DUALBOOT_STUB
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define INCLUDE_TIMEOUT_API