rockbox/firmware/drivers/wm8758.c

300 lines
7.2 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Driver for WM8758 audio codec - based on datasheet for WM8983
*
* Based on code from the ipodlinux project - http://ipodlinux.org/
* Adapted for Rockbox in December 2005
*
* Original file: linux/arch/armnommu/mach-ipod/audio.c
*
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "lcd.h"
#include "cpu.h"
#include "kernel.h"
#include "thread.h"
#include "power.h"
#include "debug.h"
#include "system.h"
#include "sprintf.h"
#include "button.h"
#include "string.h"
#include "file.h"
#include "buffer.h"
#include "audio.h"
#include "wmcodec.h"
#include "wm8758.h"
#include "i2s.h"
/* convert tenth of dB volume (-57..6) to master volume register value */
int tenthdb2master(int db)
{
/* +6 to -57dB in 1dB steps == 64 levels = 6 bits */
/* 0111111 == +6dB (0x3f) = 63) */
/* 0111001 == 0dB (0x39) = 57) */
/* 0000001 == -56dB (0x01) = */
/* 0000000 == -57dB (0x00) */
/* 1000000 == Mute (0x40) */
if (db < VOLUME_MIN) {
return 0x40;
} else {
return((db/10)+57);
}
}
/* convert tenth of dB volume (-780..0) to mixer volume register value */
int tenthdb2mixer(int db)
{
if (db < -660) /* 1.5 dB steps */
return (2640 - db) / 15;
else if (db < -600) /* 0.75 dB steps */
return (990 - db) * 2 / 15;
else if (db < -460) /* 0.5 dB steps */
return (460 - db) / 5;
else /* 0.25 dB steps */
return -db * 2 / 5;
}
void audiohw_reset(void);
#define IPOD_PCM_LEVEL 0x65 /* -6dB */
//#define BASSCTRL 0x
//#define TREBCTRL 0x0b
/* Silently enable / disable audio output */
void audiohw_enable_output(bool enable)
{
if (enable)
{
/* reset the I2S controller into known state */
i2s_reset();
/* TODO: Review the power-up sequence to prevent pops */
wmcodec_write(RESET, 0x1ff); /*Reset*/
wmcodec_write(PWRMGMT1, 0x2b);
wmcodec_write(PWRMGMT2, 0x180);
wmcodec_write(PWRMGMT3, 0x6f);
wmcodec_write(AINTFCE, 0x10);
wmcodec_write(CLKCTRL, 0x49);
wmcodec_write(OUTCTRL, 1);
/* The iPod can handle multiple frequencies, but fix at 44.1KHz
for now */
audiohw_set_sample_rate(WM8758_44100HZ);
wmcodec_write(LOUTMIX,0x1); /* Enable mixer */
wmcodec_write(ROUTMIX,0x1); /* Enable mixer */
audiohw_mute(0);
} else {
audiohw_mute(1);
}
}
int audiohw_set_master_vol(int vol_l, int vol_r)
{
/* OUT1 */
wmcodec_write(LOUT1VOL, 0x080 | vol_l);
wmcodec_write(ROUT1VOL, 0x180 | vol_r);
return 0;
}
int audiohw_set_lineout_vol(int vol_l, int vol_r)
{
/* OUT2 */
wmcodec_write(LOUT2VOL, vol_l);
wmcodec_write(ROUT2VOL, 0x100 | vol_r);
return 0;
}
int audiohw_set_mixer_vol(int channel1, int channel2)
{
(void)channel1;
(void)channel2;
return 0;
}
/* We are using Linear bass control */
void audiohw_set_bass(int value)
{
(void)value;
}
void audiohw_set_treble(int value)
{
(void)value;
}
int audiohw_mute(int mute)
{
if (mute)
{
/* Set DACMU = 1 to soft-mute the audio DACs. */
wmcodec_write(DACCTRL, 0x40);
} else {
/* Set DACMU = 0 to soft-un-mute the audio DACs. */
wmcodec_write(DACCTRL, 0x0);
}
return 0;
}
/* Nice shutdown of WM8758 codec */
void audiohw_close(void)
{
audiohw_mute(1);
wmcodec_write(PWRMGMT3, 0x0);
wmcodec_write(PWRMGMT1, 0x0);
wmcodec_write(PWRMGMT2, 0x40);
}
/* Change the order of the noise shaper, 5th order is recommended above 32kHz */
void audiohw_set_nsorder(int order)
{
(void)order;
}
/* Note: Disable output before calling this function */
void audiohw_set_sample_rate(int sampling_control)
{
/**** We force 44.1KHz for now. ****/
(void)sampling_control;
/* set clock div */
wmcodec_write(CLKCTRL, 1 | (0 << 2) | (2 << 5));
/* setup PLL for MHZ=11.2896 */
wmcodec_write(PLLN, (1 << 4) | 0x7);
wmcodec_write(PLLK1, 0x21);
wmcodec_write(PLLK2, 0x161);
wmcodec_write(PLLK3, 0x26);
/* set clock div */
wmcodec_write(CLKCTRL, 1 | (1 << 2) | (2 << 5) | (1 << 8));
/* set srate */
wmcodec_write(SRATECTRL, (0 << 1));
}
void audiohw_enable_recording(bool source_mic)
{
(void)source_mic; /* We only have a line-in (I think) */
/* reset the I2S controller into known state */
i2s_reset();
wmcodec_write(RESET, 0x1ff); /*Reset*/
wmcodec_write(PWRMGMT1, 0x2b);
wmcodec_write(PWRMGMT2, 0x18f); /* Enable ADC - 0x0c enables left/right PGA input, and 0x03 turns on power to the ADCs */
wmcodec_write(PWRMGMT3, 0x6f);
wmcodec_write(AINTFCE, 0x10);
wmcodec_write(CLKCTRL, 0x49);
wmcodec_write(OUTCTRL, 1);
/* The iPod can handle multiple frequencies, but fix at 44.1KHz
for now */
audiohw_set_sample_rate(WM8758_44100HZ);
wmcodec_write(INCTRL,0x44); /* Connect L2 and R2 inputs */
/* Set L2/R2_2BOOSTVOL to 0db (bits 4-6) */
/* 000 = disabled
001 = -12dB
010 = -9dB
011 = -6dB
100 = -3dB
101 = 0dB
110 = 3dB
111 = 6dB
*/
wmcodec_write(LADCBOOST,0x50);
wmcodec_write(RADCBOOST,0x50);
/* Set L/R input PGA Volume to 0db */
// wm8758_write(LINPGAVOL,0x3f);
// wm8758_write(RINPGAVOL,0x13f);
/* Enable monitoring */
wmcodec_write(LOUTMIX,0x17); /* Enable output mixer - BYPL2LMIX @ 0db*/
wmcodec_write(ROUTMIX,0x17); /* Enable output mixer - BYPR2RMIX @ 0db*/
audiohw_mute(0);
}
void audiohw_disable_recording(void) {
audiohw_mute(1);
wmcodec_write(PWRMGMT3, 0x0);
wmcodec_write(PWRMGMT1, 0x0);
wmcodec_write(PWRMGMT2, 0x40);
}
void audiohw_set_recvol(int left, int right, int type) {
(void)left;
(void)right;
(void)type;
}
void audiohw_set_monitor(int enable) {
(void)enable;
}
void audiohw_set_equalizer_band(int band, int freq, int bw, int gain)
{
unsigned int eq = 0;
/* Band 1..3 are peak filters */
if (band >= 1 && band <= 3) {
eq |= (bw << 8);
}
eq |= (freq << 5);
eq |= 12 - gain;
if (band == 0) {
wmcodec_write(EQ1, eq | 0x100); /* Always apply EQ to the DAC path */
} else if (band == 1) {
wmcodec_write(EQ2, eq);
} else if (band == 2) {
wmcodec_write(EQ3, eq);
} else if (band == 3) {
wmcodec_write(EQ4, eq);
} else if (band == 4) {
wmcodec_write(EQ5, eq);
}
}