rockbox/firmware/target/coldfire/iriver/udacodec-iriver.c

77 lines
2.1 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2009 by Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "kernel.h"
#include "i2c-coldfire.h"
#include "pcf50606.h"
#include "uda1380.h"
#include "udacodec.h"
void udacodec_reset(void)
{
#ifdef IRIVER_H300_SERIES
int mask = disable_irq_save();
pcf50606_write(0x3b, 0x00); /* GPOOD2 high Z */
pcf50606_write(0x3b, 0x07); /* GPOOD2 low */
restore_irq(mask);
#else
/* RESET signal */
or_l(1<<29, &GPIO_OUT);
or_l(1<<29, &GPIO_ENABLE);
or_l(1<<29, &GPIO_FUNCTION);
sleep(HZ/100);
and_l(~(1<<29), &GPIO_OUT);
#endif
}
int udacodec_write(unsigned char reg, unsigned short value)
{
unsigned char data[3];
data[0] = reg;
data[1] = value >> 8;
data[2] = value & 0xff;
if (i2c_write(I2C_IFACE_0, UDA1380_ADDR, data, 3) != 3) {
return -1;
}
return 0;
}
int udacodec_write2(unsigned char reg,
unsigned short value1, unsigned short value2)
{
unsigned char data[5];
data[0] = reg;
data[1] = value1 >> 8;
data[2] = value1 & 0xFF;
data[3] = value2 >> 8;
data[4] = value2 & 0xFF;
if (i2c_write(I2C_IFACE_0, UDA1380_ADDR, data, 5) != 5) {
return -1;
}
return 0;
}