rockbox/firmware/powermgmt.c

840 lines
22 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese
* Revisions copyright (C) 2005 by Gerald Van Baren
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "kernel.h"
#include "thread.h"
#include "debug.h"
#include "adc.h"
#include "string.h"
#include "storage.h"
#include "power.h"
#include "audio.h"
#include "mp3_playback.h"
#include "usb.h"
#include "powermgmt.h"
#include "backlight.h"
#include "lcd.h"
#include "rtc.h"
#if CONFIG_TUNER
#include "fmradio.h"
#endif
#include "sound.h"
#ifdef HAVE_LCD_BITMAP
#include "font.h"
#endif
#include "logf.h"
#include "lcd-remote.h"
#ifdef SIMULATOR
#include <time.h>
#endif
#if (defined(IAUDIO_X5) || defined(IAUDIO_M5)) && !defined (SIMULATOR)
#include "lcd-remote-target.h"
#endif
#if (defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)) \
&& !defined (SIMULATOR)
#include "pcf50606.h"
#endif
/** Shared by sim **/
int last_sent_battery_level = 100;
/* battery level (0-100%) */
int battery_percent = -1;
void send_battery_level_event(void);
#if CONFIG_CHARGING
/* State of the charger input as seen by the power thread */
enum charger_input_state_type charger_input_state;
/* Power inputs as seen by the power thread */
unsigned int power_thread_inputs;
#if CONFIG_CHARGING >= CHARGING_MONITOR
/* Charging state (mode) as seen by the power thread */
enum charge_state_type charge_state = DISCHARGING;
#endif
#endif /* CONFIG_CHARGING */
#ifndef SIMULATOR
static int shutdown_timeout = 0;
/*
* Average battery voltage and charger voltage, filtered via a digital
* exponential filter (aka. exponential moving average, scaled):
* avgbat = y[n] = (N-1)/N*y[n-1] + x[n]. battery_millivolts = y[n] / N.
*/
static unsigned int avgbat;
/* filtered battery voltage, millivolts */
static unsigned int battery_millivolts;
/* default value, mAh */
static int battery_capacity = BATTERY_CAPACITY_DEFAULT;
#if BATTERY_TYPES_COUNT > 1
static int battery_type = 0;
#else
#define battery_type 0
#endif
/* Power history: power_history[0] is the newest sample */
unsigned short power_history[POWER_HISTORY_LEN];
#if CONFIG_CPU == JZ4732 /* FIXME! */
static char power_stack[DEFAULT_STACK_SIZE + POWERMGMT_DEBUG_STACK];
#else
static char power_stack[DEFAULT_STACK_SIZE/2 + POWERMGMT_DEBUG_STACK];
#endif
static const char power_thread_name[] = "power";
static int poweroff_timeout = 0;
static int powermgmt_est_runningtime_min = -1;
static bool sleeptimer_active = false;
static long sleeptimer_endtick;
static long last_event_tick;
static int voltage_to_battery_level(int battery_millivolts);
static void battery_status_update(void);
static int runcurrent(void);
void battery_read_info(int *voltage, int *level)
{
int millivolts = battery_adc_voltage();
if (voltage)
*voltage = millivolts;
if (level)
*level = voltage_to_battery_level(millivolts);
}
void reset_poweroff_timer(void)
{
last_event_tick = current_tick;
}
#if BATTERY_TYPES_COUNT > 1
void set_battery_type(int type)
{
if (type != battery_type) {
if ((unsigned)type >= BATTERY_TYPES_COUNT)
type = 0;
battery_type = type;
battery_status_update(); /* recalculate the battery status */
}
}
#endif
void set_battery_capacity(int capacity)
{
if (capacity > BATTERY_CAPACITY_MAX)
capacity = BATTERY_CAPACITY_MAX;
if (capacity < BATTERY_CAPACITY_MIN)
capacity = BATTERY_CAPACITY_MIN;
battery_capacity = capacity;
battery_status_update(); /* recalculate the battery status */
}
int get_battery_capacity(void)
{
return battery_capacity;
}
int battery_time(void)
{
return powermgmt_est_runningtime_min;
}
/* Returns battery level in percent */
int battery_level(void)
{
#ifdef HAVE_BATTERY_SWITCH
if ((power_input_status() & POWER_INPUT_BATTERY) == 0)
return -1;
#endif
return battery_percent;
}
/* Returns filtered battery voltage [millivolts] */
unsigned int battery_voltage(void)
{
return battery_millivolts;
}
/* Tells if the battery level is safe for disk writes */
bool battery_level_safe(void)
{
#if defined(NO_LOW_BATTERY_SHUTDOWN)
return true;
#elif defined(HAVE_BATTERY_SWITCH)
/* Cannot rely upon the battery reading to be valid and the
* device could be powered externally. */
return input_millivolts() > battery_level_dangerous[battery_type];
#else
return battery_millivolts > battery_level_dangerous[battery_type];
#endif
}
void set_poweroff_timeout(int timeout)
{
poweroff_timeout = timeout;
}
void set_sleep_timer(int seconds)
{
if (seconds) {
sleeptimer_active = true;
sleeptimer_endtick = current_tick + seconds * HZ;
}
else {
sleeptimer_active = false;
sleeptimer_endtick = 0;
}
}
int get_sleep_timer(void)
{
if (sleeptimer_active)
return (sleeptimer_endtick - current_tick) / HZ;
else
return 0;
}
/* look into the percent_to_volt_* table and get a realistic battery level */
static int voltage_to_percent(int voltage, const short* table)
{
if (voltage <= table[0]) {
return 0;
}
else if (voltage >= table[10]) {
return 100;
}
else {
/* search nearest value */
int i = 0;
while (i < 10 && table[i+1] < voltage)
i++;
/* interpolate linear between the smaller and greater value */
/* Tens digit, 10% per entry, ones digit: interpolated */
return i*10 + (voltage - table[i])*10 / (table[i+1] - table[i]);
}
}
/* update battery level and estimated runtime, called once per minute or
* when battery capacity / type settings are changed */
static int voltage_to_battery_level(int battery_millivolts)
{
int level;
#if CONFIG_CHARGING >= CHARGING_MONITOR
if (charging_state()) {
/* battery level is defined to be < 100% until charging is finished */
level = voltage_to_percent(battery_millivolts,
percent_to_volt_charge);
if (level > 99)
level = 99;
}
else
#endif /* CONFIG_CHARGING >= CHARGING_MONITOR */
{
/* DISCHARGING or error state */
level = voltage_to_percent(battery_millivolts,
percent_to_volt_discharge[battery_type]);
}
return level;
}
static void battery_status_update(void)
{
int level = voltage_to_battery_level(battery_millivolts);
/* calculate estimated remaining running time */
#if CONFIG_CHARGING >= CHARGING_MONITOR
if (charging_state()) {
/* charging: remaining charging time */
powermgmt_est_runningtime_min = (100 - level)*battery_capacity*60
/ 100 / (CURRENT_MAX_CHG - runcurrent());
}
else
#endif
/* discharging: remaining running time */
if ((battery_millivolts + 20) > percent_to_volt_discharge[0][0]) {
powermgmt_est_runningtime_min = (level + battery_percent)*60
* battery_capacity / 200 / runcurrent();
}
else if (battery_millivolts <= battery_level_shutoff[0]) {
powermgmt_est_runningtime_min = 0;
}
else {
powermgmt_est_runningtime_min =
(battery_millivolts - battery_level_shutoff[0]) / 2;
}
battery_percent = level;
send_battery_level_event();
}
/*
* We shut off in the following cases:
* 1) The unit is idle, not playing music
* 2) The unit is playing music, but is paused
* 3) The battery level has reached shutdown limit
*
* We do not shut off in the following cases:
* 1) The USB is connected
* 2) The charger is connected
* 3) We are recording, or recording with pause
* 4) The radio is playing
*/
static void handle_auto_poweroff(void)
{
long timeout = poweroff_timeout*60*HZ;
int audio_stat = audio_status();
long tick = current_tick;
#if CONFIG_CHARGING
/*
* Inhibit shutdown as long as the charger is plugged in. If it is
* unplugged, wait for a timeout period and then shut down.
*/
if (charger_input_state == CHARGER || audio_stat == AUDIO_STATUS_PLAY) {
last_event_tick = current_tick;
}
#endif
if (!shutdown_timeout && query_force_shutdown()) {
backlight_on();
sys_poweroff();
}
if (timeout &&
#if CONFIG_TUNER
!(get_radio_status() & FMRADIO_PLAYING) &&
#endif
!usb_inserted() &&
(audio_stat == 0 ||
(audio_stat == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE) &&
!sleeptimer_active))) {
if (TIME_AFTER(tick, last_event_tick + timeout) &&
TIME_AFTER(tick, storage_last_disk_activity() + timeout)) {
sys_poweroff();
}
}
else if (sleeptimer_active) {
/* Handle sleeptimer */
if (TIME_AFTER(tick, sleeptimer_endtick)) {
audio_stop();
if (usb_inserted()
#if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING)
|| charger_input_state != NO_CHARGER
#endif
) {
DEBUGF("Sleep timer timeout. Stopping...\n");
set_sleep_timer(0);
backlight_off(); /* Nighty, nighty... */
}
else {
DEBUGF("Sleep timer timeout. Shutting off...\n");
sys_poweroff();
}
}
}
}
/*
* Estimate how much current we are drawing just to run.
*/
static int runcurrent(void)
{
int current;
#if MEM == 8 && !(defined(ARCHOS_ONDIOSP) || defined(ARCHOS_ONDIOFM))
/* assuming 192 kbps, the running time is 22% longer with 8MB */
current = CURRENT_NORMAL*100 / 122;
#else
current = CURRENT_NORMAL;
#endif /* MEM == 8 */
#ifndef BOOTLOADER
if (usb_inserted()
#ifdef HAVE_USB_POWER
#if (CURRENT_USB < CURRENT_NORMAL)
|| usb_powered()
#else
&& !usb_powered()
#endif
#endif
) {
current = CURRENT_USB;
}
#if defined(HAVE_BACKLIGHT)
if (backlight_get_current_timeout() == 0) /* LED always on */
current += CURRENT_BACKLIGHT;
#endif
#if defined(HAVE_RECORDING) && defined(CURRENT_RECORD)
if (audio_status() & AUDIO_STATUS_RECORD)
current += CURRENT_RECORD;
#endif
#ifdef HAVE_SPDIF_POWER
if (spdif_powered())
current += CURRENT_SPDIF_OUT;
#endif
#ifdef HAVE_REMOTE_LCD
if (remote_detect())
current += CURRENT_REMOTE;
#endif
#endif /* BOOTLOADER */
return current;
}
/* Check to see whether or not we've received an alarm in the last second */
#ifdef HAVE_RTC_ALARM
static void power_thread_rtc_process(void)
{
if (rtc_check_alarm_flag())
rtc_enable_alarm(false);
}
#endif
/* switch off unit if battery level is too low for reliable operation */
bool query_force_shutdown(void)
{
#if defined(NO_LOW_BATTERY_SHUTDOWN)
return false;
#elif defined(HAVE_BATTERY_SWITCH)
/* Cannot rely upon the battery reading to be valid and the
* device could be powered externally. */
return input_millivolts() < battery_level_shutoff[battery_type];
#else
return battery_millivolts < battery_level_shutoff[battery_type];
#endif
}
#if defined(HAVE_BATTERY_SWITCH) || defined(HAVE_RESET_BATTERY_FILTER)
/*
* Reset the battery voltage filter to a new value and update the
* status.
*/
void reset_battery_filter(int millivolts)
{
avgbat = millivolts * BATT_AVE_SAMPLES;
battery_millivolts = millivolts;
battery_status_update();
}
#endif /* HAVE_BATTERY_SWITCH */
/** Generic charging algorithms for common charging types **/
#if CONFIG_CHARGING == 0 || CONFIG_CHARGING == CHARGING_SIMPLE
static inline void powermgmt_init_target(void)
{
/* Nothing to do */
}
static inline void charging_algorithm_step(void)
{
/* Nothing to do */
}
static inline void charging_algorithm_close(void)
{
/* Nothing to do */
}
#elif CONFIG_CHARGING == CHARGING_MONITOR
/*
* Monitor CHARGING/DISCHARGING state.
*/
static inline void powermgmt_init_target(void)
{
/* Nothing to do */
}
static inline void charging_algorithm_step(void)
{
switch (charger_input_state)
{
case CHARGER_PLUGGED:
case CHARGER:
if (charging_state()) {
charge_state = CHARGING;
break;
}
/* Fallthrough */
case CHARGER_UNPLUGGED:
case NO_CHARGER:
charge_state = DISCHARGING;
break;
}
}
static inline void charging_algorithm_close(void)
{
/* Nothing to do */
}
#endif /* CONFIG_CHARGING == * */
#if CONFIG_CHARGING
/* Shortcut function calls - compatibility, simplicity. */
/* Returns true if any power input is capable of charging. */
bool charger_inserted(void)
{
return power_thread_inputs & POWER_INPUT_CHARGER;
}
/* Returns true if any power input is connected - charging-capable
* or not. */
bool power_input_present(void)
{
return power_thread_inputs & POWER_INPUT;
}
/*
* Detect charger inserted. Return true if the state is transistional.
*/
static inline bool detect_charger(unsigned int pwr)
{
/*
* Detect charger plugged/unplugged transitions. On a plugged or
* unplugged event, we return immediately, run once through the main
* loop (including the subroutines), and end up back here where we
* transition to the appropriate steady state charger on/off state.
*/
if (pwr & POWER_INPUT_CHARGER) {
switch (charger_input_state)
{
case NO_CHARGER:
case CHARGER_UNPLUGGED:
charger_input_state = CHARGER_PLUGGED;
break;
case CHARGER_PLUGGED:
queue_broadcast(SYS_CHARGER_CONNECTED, 0);
last_sent_battery_level = 0;
charger_input_state = CHARGER;
break;
case CHARGER:
/* Steady state */
return false;
}
}
else { /* charger not inserted */
switch (charger_input_state)
{
case NO_CHARGER:
/* Steady state */
return false;
case CHARGER_UNPLUGGED:
queue_broadcast(SYS_CHARGER_DISCONNECTED, 0);
last_sent_battery_level = 100;
charger_input_state = NO_CHARGER;
break;
case CHARGER_PLUGGED:
case CHARGER:
charger_input_state = CHARGER_UNPLUGGED;
break;
}
}
/* Transitional state */
return true;
}
#endif /* CONFIG_CHARGING */
/*
* Monitor the presence of a charger and perform critical frequent steps
* such as running the battery voltage filter.
*/
static inline void power_thread_step(void)
{
/* If the power off timeout expires, the main thread has failed
to shut down the system, and we need to force a power off */
if (shutdown_timeout) {
shutdown_timeout -= POWER_THREAD_STEP_TICKS;
if (shutdown_timeout <= 0)
power_off();
}
#ifdef HAVE_RTC_ALARM
power_thread_rtc_process();
#endif
/*
* Do a digital exponential filter. We don't sample the battery if
* the disk is spinning unless we are in USB mode (the disk will most
* likely always be spinning in USB mode) or charging.
*/
if (!storage_disk_is_active() || usb_inserted()
#if CONFIG_CHARGING >= CHARGING_MONITOR
|| charger_input_state == CHARGER
#endif
) {
avgbat += battery_adc_voltage() - avgbat / BATT_AVE_SAMPLES;
/*
* battery_millivolts is the millivolt-scaled filtered battery value.
*/
battery_millivolts = avgbat / BATT_AVE_SAMPLES;
/* update battery status every time an update is available */
battery_status_update();
}
else if (battery_percent < 8) {
/*
* If battery is low, observe voltage during disk activity.
* Shut down if voltage drops below shutoff level and we are not
* using NiMH or Alkaline batteries.
*/
battery_millivolts = (battery_adc_voltage() +
battery_millivolts + 1) / 2;
/* update battery status every time an update is available */
battery_status_update();
if (!shutdown_timeout && query_force_shutdown()) {
sys_poweroff();
}
else {
avgbat += battery_millivolts - avgbat / BATT_AVE_SAMPLES;
}
}
} /* power_thread_step */
static void power_thread(void)
{
long next_power_hist;
/* Delay reading the first battery level */
#ifdef MROBE_100
while (battery_adc_voltage() > 4200) /* gives false readings initially */
#endif
{
sleep(HZ/100);
}
#if CONFIG_CHARGING
/* Initialize power input status before calling other routines. */
power_thread_inputs = power_input_status();
#endif
/* initialize the voltages for the exponential filter */
avgbat = battery_adc_voltage() + 15;
#ifdef HAVE_DISK_STORAGE /* this adjustment is only needed for HD based */
/* The battery voltage is usually a little lower directly after
turning on, because the disk was used heavily. Raise it by 5% */
#if CONFIG_CHARGING
if (!charger_inserted()) /* only if charger not connected */
#endif
{
avgbat += (percent_to_volt_discharge[battery_type][6] -
percent_to_volt_discharge[battery_type][5]) / 2;
}
#endif /* HAVE_DISK_STORAGE */
avgbat = avgbat * BATT_AVE_SAMPLES;
battery_millivolts = avgbat / BATT_AVE_SAMPLES;
power_history[0] = battery_millivolts;
#if CONFIG_CHARGING
if (charger_inserted()) {
battery_percent = voltage_to_percent(battery_millivolts,
percent_to_volt_charge);
}
else
#endif
{
battery_percent = voltage_to_percent(battery_millivolts,
percent_to_volt_discharge[battery_type]);
battery_percent += battery_percent < 100;
}
powermgmt_init_target();
next_power_hist = current_tick + HZ*60;
while (1)
{
#if CONFIG_CHARGING
unsigned int pwr = power_input_status();
#ifdef HAVE_BATTERY_SWITCH
if ((pwr ^ power_thread_inputs) & POWER_INPUT_BATTERY) {
sleep(HZ/10);
reset_battery_filter(battery_adc_voltage());
}
#endif
power_thread_inputs = pwr;
if (!detect_charger(pwr))
#endif /* CONFIG_CHARGING */
{
/* Steady state */
sleep(POWER_THREAD_STEP_TICKS);
/* Do common power tasks */
power_thread_step();
}
/* Perform target tasks */
charging_algorithm_step();
if (TIME_BEFORE(current_tick, next_power_hist))
continue;
/* increment to ensure there is a record for every minute
* rather than go forward from the current tick */
next_power_hist += HZ*60;
/* rotate the power history */
memmove(&power_history[1], &power_history[0],
sizeof(power_history) - sizeof(power_history[0]));
/* insert new value at the start, in millivolts 8-) */
power_history[0] = battery_millivolts;
handle_auto_poweroff();
}
} /* power_thread */
void powermgmt_init(void)
{
/* init history to 0 */
memset(power_history, 0, sizeof(power_history));
create_thread(power_thread, power_stack, sizeof(power_stack), 0,
power_thread_name IF_PRIO(, PRIORITY_SYSTEM)
IF_COP(, CPU));
}
/* Various hardware housekeeping tasks relating to shutting down the player */
void shutdown_hw(void)
{
charging_algorithm_close();
audio_stop();
if (battery_level_safe()) { /* do not save on critical battery */
#ifdef HAVE_LCD_BITMAP
glyph_cache_save();
#endif
if (storage_disk_is_active())
storage_spindown(1);
}
while (storage_disk_is_active())
sleep(HZ/10);
#if CONFIG_CODEC == SWCODEC
audiohw_close();
#else
mp3_shutdown();
#endif
/* If HD is still active we try to wait for spindown, otherwise the
shutdown_timeout in power_thread_step will force a power off */
while (storage_disk_is_active())
sleep(HZ/10);
#ifndef HAVE_LCD_COLOR
lcd_set_contrast(0);
#endif
#ifdef HAVE_REMOTE_LCD
lcd_remote_set_contrast(0);
#endif
#ifdef HAVE_LCD_SHUTDOWN
lcd_shutdown();
#endif
/* Small delay to make sure all HW gets time to flush. Especially
eeprom chips are quite slow and might be still writing the last
byte. */
sleep(HZ/4);
power_off();
}
void sys_poweroff(void)
{
#ifndef BOOTLOADER
logf("sys_poweroff()");
/* If the main thread fails to shut down the system, we will force a
power off after an 20 second timeout - 28 seconds if recording */
if (shutdown_timeout == 0) {
#if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
pcf50606_reset_timeout(); /* Reset timer on first attempt only */
#endif
#ifdef HAVE_RECORDING
if (audio_status() & AUDIO_STATUS_RECORD)
shutdown_timeout += HZ*8;
#endif
shutdown_timeout += HZ*20;
}
queue_broadcast(SYS_POWEROFF, 0);
#endif /* BOOTLOADER */
}
void cancel_shutdown(void)
{
logf("cancel_shutdown()");
#if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(COWON_D2)
/* TODO: Move some things to target/ tree */
if (shutdown_timeout)
pcf50606_reset_timeout();
#endif
shutdown_timeout = 0;
}
#endif /* SIMULATOR */
/* Send system battery level update events on reaching certain significant
levels. This must be called after battery_percent has been updated. */
void send_battery_level_event(void)
{
static const int levels[] = { 5, 15, 30, 50, 0 };
const int *level = levels;
while (*level)
{
if (battery_percent <= *level && last_sent_battery_level > *level) {
last_sent_battery_level = *level;
queue_broadcast(SYS_BATTERY_UPDATE, last_sent_battery_level);
break;
}
level++;
}
}