rockbox/firmware/export/config/ipod6g.h

/*
 * This config file is for iPod 6G / Classic
 */
#define TARGET_TREE /* this target is using the target tree system */

#define IPOD_ARCH 1

/* For Rolo and boot loader */
#define MODEL_NUMBER 71

#define MODEL_NAME   "Apple iPod Classic/6G"

/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA

#define HAVE_ATA_DMA 
#define ATA_MAX_UDMA 4
#define ATA_MAX_MWDMA 2

/* define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48

/* define this if you have recording possibility */
//#define HAVE_RECORDING

/* Define bitmask of input sources - recordable bitmask can be defined
   explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_LINEIN)

/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS   (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \
                       | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \
                       | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8)

/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \
                       | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \
                       | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8)

/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP

/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP

/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you can invert the colours on your LCD */
//#define HAVE_LCD_INVERT

/* LCD stays visible without backlight - simulator hint */
#define HAVE_TRANSFLECTIVE_LCD

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
#define HAVE_WHEEL_ACCELERATION
#define WHEEL_ACCEL_START 270
#define WHEEL_ACCELERATION 3

/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION

/* LCD dimensions */
#define LCD_WIDTH  320
#define LCD_HEIGHT 240
#define LCD_DEPTH  16   /* pseudo 262.144 colors */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */

/* Define this if the LCD can shut down */
#define HAVE_LCD_SHUTDOWN

/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE

/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
   should be defined as well. */
#ifndef BOOTLOADER
//TODO: #define HAVE_LCD_SLEEP
//TODO: #define HAVE_LCD_SLEEP_SETTING
#endif

#define CONFIG_KEYPAD IPOD_4G_PAD

//#define AB_REPEAT_ENABLE
//#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE

/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT

/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC

/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_NANO2G

/* Define if the device can wake from an RTC alarm */
//#define HAVE_RTC_ALARM

#define CONFIG_LCD LCD_IPOD6G

/* Define the type of audio codec */
#define HAVE_CS42L55

#define HAVE_PCM_DMA_ADDRESS

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000

// TODO: Figure out real values
#define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
#define BATTERY_CAPACITY_MIN     300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX     500 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC      10 /* capacity increment */
#define BATTERY_TYPES_COUNT        1 /* only one type */

/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR

/* define current usage levels */
//TODO: #define CURRENT_NORMAL     21  /* playback @48MHz clock, backlight off */
//TODO: #define CURRENT_BACKLIGHT  23  /* maximum brightness */

/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER

/* Define this if your LCD can set contrast */
//#define HAVE_LCD_CONTRAST

/* Define Apple remote tuner */
//#define CONFIG_TUNER IPOD_REMOTE_TUNER
//#define HAVE_RDS_CAP

/* The exact type of CPU */
#define CONFIG_CPU S5L8702

/* I2C interface */
#define CONFIG_I2C I2C_S5L8702

#define HAVE_USB_CHARGING_ENABLE

/* The size of the flash ROM */
#define FLASH_SIZE 0x1000000

/* Define this to the CPU frequency */
#define CPU_FREQ        216000000

/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING

/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0

/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8

/* Define this if you can read an absolute wheel position */
#define HAVE_WHEEL_POSITION

//#define HAVE_ATA_BBT
//#define ATA_BBT_PAGES 3072

#define SECTOR_SIZE 4096

#define STORAGE_NEEDS_ALIGN

/* define this if the device has larger sectors when accessed via USB */
/* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
//#define MAX_LOG_SECTOR_SIZE 4096

/* define this if the hard drive uses large physical sectors (ATA-7 feature) */
/* and doesn't handle them in the drive firmware */
//#define MAX_PHYS_SECTOR_SIZE 4096

/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ

#define BOOTFILE_EXT "ipod"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"

/* Alternative bootfile extension - this is for encrypted images */
#define BOOTFILE_EXT2 "ipodx"

/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN

/** Port-specific settings **/

#if 0
/* Main LCD contrast range and defaults */
#define MIN_CONTRAST_SETTING        1
#define MAX_CONTRAST_SETTING        30
#define DEFAULT_CONTRAST_SETTING    19 /* Match boot contrast */
#endif

/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING      1
#define MAX_BRIGHTNESS_SETTING      0x3f
#define DEFAULT_BRIGHTNESS_SETTING  0x20

/* USB defines */
#define HAVE_USBSTACK
//#define HAVE_USB_HID_MOUSE - broken?
#define CONFIG_USBOTG USBOTG_S3C6400X
#define USB_VENDOR_ID 0x05AC
//TODO: This is still the Nano2G product ID. Figure out the real one.
#define USB_PRODUCT_ID 0x1260
#define USB_NUM_ENDPOINTS 5
#define USE_ROCKBOX_USB
#define USB_DEVBSS_ATTR __attribute__((aligned(16)))

/* Define this if you can switch on/off the accessory power supply */
#define HAVE_ACCESSORY_SUPPLY
//#define IPOD_ACCESSORY_PROTOCOL
//#define HAVE_SERIAL

/* Define this, if you can switch on/off the lineout */
#define HAVE_LINEOUT_POWEROFF

#define USB_WRITE_BUFFER_SIZE (1024*64)

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY