rockbox/firmware/target/hosted/samsungypr/lcd-ypr.c

/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id: lcd-bitmap.c 29248 2011-02-08 20:05:25Z thomasjfox $
 *
 * Copyright (C) 2011 Lorenzo Miori, Thomas Martitz
 * Copyright (C) 2013 Lorenzo Miori
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <linux/fb.h>
#include <sys/mman.h>
#include <sys/ioctl.h>
#include "config.h"
#include "file.h"
#include "debug.h"
#include "system.h"
#include "screendump.h"
#include "lcd.h"
#include "lcd-target.h"

static int dev_fd = 0;
fb_data *dev_fb = 0;

#ifdef HAVE_LCD_SHUTDOWN
void lcd_shutdown(void)
{
    printf("FB closed.");
    munmap(dev_fb, FRAMEBUFFER_SIZE);
    close(dev_fd);
}
#endif

void lcd_init_device(void)
{
    size_t screensize;
    struct fb_var_screeninfo vinfo;
    struct fb_fix_screeninfo finfo;

    /* Open the framebuffer device */
    dev_fd = open("/dev/fb0", O_RDWR);
    if (dev_fd == -1) {
        perror("Error: cannot open framebuffer device");
        exit(1);
    }
    printf("The framebuffer device was opened successfully.\n");

    /* Get the fixed properties */
    if (ioctl(dev_fd, FBIOGET_FSCREENINFO, &finfo) == -1) {
        perror("Error reading fixed information");
        exit(2);
    }

    /* Now we get the settable settings, and we set 16 bit bpp */
    if (ioctl(dev_fd, FBIOGET_VSCREENINFO, &vinfo) == -1) {
        perror("Error reading variable information");
        exit(3);
    }

    vinfo.bits_per_pixel = LCD_DEPTH;

    if (ioctl(dev_fd, FBIOPUT_VSCREENINFO, &vinfo)) {
            perror("fbset(ioctl)");
            exit(4);
    }

    printf("%dx%d, %dbpp\n", vinfo.xres, vinfo.yres, vinfo.bits_per_pixel);

    /* Figure out the size of the screen in bytes */
    screensize = vinfo.xres * vinfo.yres * vinfo.bits_per_pixel / 8;
    if (screensize != FRAMEBUFFER_SIZE) {
        exit(4);
        perror("Display and framebuffer mismatch!\n");
    }

    /* Map the device to memory */
    dev_fb = mmap(0, screensize, PROT_READ | PROT_WRITE, MAP_SHARED, dev_fd, 0);
    if ((int)dev_fb == -1) {
        perror("Error: failed to map framebuffer device to memory");
        exit(4);
    }
    printf("The framebuffer device was mapped to memory successfully.\n");

    /* Be sure to turn on display at startup */
    ioctl(dev_fd, FBIOBLANK, VESA_NO_BLANKING);
#ifdef HAVE_LCD_ENABLE
    lcd_set_active(true);
#endif
}

#ifdef HAVE_LCD_ENABLE
void lcd_enable(bool enable)
 {
    if (lcd_active() == enable)
        return;

    lcd_set_active(enable);

    /* Turn on or off the display using Linux interface */
    ioctl(dev_fd, FBIOBLANK, enable ? VESA_NO_BLANKING : VESA_POWERDOWN);

    if (enable)
        send_event(LCD_EVENT_ACTIVATION, NULL);
}
#endif