rockbox/firmware/drivers/audio/wm8975.c

/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Driver for WM8975 audio codec
 *
 * Based on code from the ipodlinux project - http://ipodlinux.org/
 * Adapted for Rockbox in December 2005
 *
 * Original file: linux/arch/armnommu/mach-ipod/audio.c
 *
 * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include "logf.h"
#include "system.h"
#include "string.h"
#include "audio.h"

#include "wmcodec.h"
#include "audiohw.h"
#include "i2s.h"

const struct sound_settings_info audiohw_settings[] = {
    [SOUND_VOLUME]        = {"dB", 0,  1, -74,   6, -25},
    [SOUND_BASS]          = {"dB", 0,  1,  -6,   9,   0},
    [SOUND_TREBLE]        = {"dB", 0,  1,  -6,   9,   0},
    [SOUND_BALANCE]       = {"%",  0,  1,-100, 100,   0},
    [SOUND_CHANNELS]      = {"",   0,  1,   0,   5,   0},
    [SOUND_STEREO_WIDTH]  = {"%",  0,  5,   0, 250, 100},
#ifdef HAVE_RECORDING
    [SOUND_LEFT_GAIN]     = {"dB", 1,  1,   0,  63,  23},
    [SOUND_RIGHT_GAIN]    = {"dB", 1,  1,   0,  63,  23},
    [SOUND_MIC_GAIN]      = {"dB", 1,  1,   0,  63,   0},
#endif
};

static unsigned short wm8975_regs[] =
{
    [LINVOL]   = LINVOL_LZCEN | 23, /* 0dB */
    [RINVOL]   = RINVOL_RIVU | RINVOL_RZCEN | 23, /* 0dB */
    [DAPCTRL]  = DAPCTRL_DACMU,
    [PWRMGMT1] = PWRMGMT1_VMIDSEL_5K | PWRMGMT1_VREF,
    [PWRMGMT2] = PWRMGMT2_DACL | PWRMGMT2_DACR | PWRMGMT2_LOUT1 
                 | PWRMGMT2_ROUT1 | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2,
};

static void wm8975_write(int reg, unsigned val)
{
    wm8975_regs[reg] = val;
    wmcodec_write(reg, val);
}

static void wm8975_write_and(int reg, unsigned bits)
{
    wm8975_write(reg, wm8975_regs[reg] & bits);
}

static void wm8975_write_or(int reg, unsigned bits)
{
    wm8975_write(reg, wm8975_regs[reg] | bits);
}

/* convert tenth of dB volume (-730..60) to master volume register value */
int tenthdb2master(int db)
{
    /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
    /* 1111111 == +6dB  (0x7f) */
    /* 1111001 == 0dB   (0x79) */
    /* 0110000 == -73dB (0x30 */
    /* 0101111..0000000 == mute  (0x2f) */

    if (db < VOLUME_MIN) {
        return 0x0;
    } else {
        return((db/10)+73+0x30);
    }
}

int sound_val2phys(int setting, int value)
{
    int result;

    switch(setting)
    {
#ifdef HAVE_RECORDING
    case SOUND_LEFT_GAIN:
    case SOUND_RIGHT_GAIN:
        result = ((value - 23) * 15) / 2;
        break;
    case SOUND_MIC_GAIN:
        result = ((value - 23) * 15) / 2 + 200;
        break;
#endif
    default:
        result = value;
        break;
    }

    return result;
}

void audiohw_mute(bool mute)
{
    if (mute) {
        /* Set DACMU = 1 to soft-mute the audio DACs. */
        wm8975_write_or(DAPCTRL, DAPCTRL_DACMU);
    } else {
        /* Set DACMU = 0 to soft-un-mute the audio DACs. */
        wm8975_write_and(DAPCTRL, ~DAPCTRL_DACMU);
    }
}

#define IPOD_PCM_LEVEL 0x65       /* -6dB */

void audiohw_preinit(void)
{
    i2s_reset();

    /* POWER UP SEQUENCE */
    wmcodec_write(RESET, RESET_RESET);

    /* 2. Enable Vmid and VREF, quick startup. */
    wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]);
    sleep(HZ/50);
    wm8975_regs[PWRMGMT1] &= ~PWRMGMT1_VMIDSEL_MASK;
    wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1] | PWRMGMT1_VMIDSEL_50K);
    
    /* 4. Enable DACs, line and headphone output buffers as required. */
    wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]);
    
    wmcodec_write(AINTFCE, AINTFCE_MS | AINTFCE_LRP_I2S_RLO
                         | AINTFCE_IWL_16BIT | AINTFCE_FORMAT_I2S);

    wm8975_write(DAPCTRL, wm8975_regs[DAPCTRL] );

    audiohw_set_sample_rate(WM8975_44100HZ);

    /* set the volume to -6dB */
    wmcodec_write(LOUT1VOL, LOUT1VOL_LO1ZC | IPOD_PCM_LEVEL);
    wmcodec_write(ROUT1VOL, ROUT1VOL_RO1VU | ROUT1VOL_RO1ZC | IPOD_PCM_LEVEL);

    wmcodec_write(LOUTMIX1, LOUTMIX1_LD2LO| LOUTMIX1_LI2LOVOL(5));
    wmcodec_write(LOUTMIX2, LOUTMIX2_RI2LOVOL(5));
    
    wmcodec_write(ROUTMIX1, ROUTMIX1_LI2ROVOL(5));
    wmcodec_write(ROUTMIX2, ROUTMIX2_RD2RO| ROUTMIX2_RI2ROVOL(5));
    
    wmcodec_write(MOUTMIX1, 0);
    wmcodec_write(MOUTMIX2, 0);
}

void audiohw_postinit(void)
{
    audiohw_mute(false);
}


void audiohw_set_master_vol(int vol_l, int vol_r)
{
    /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
    /* 1111111 == +6dB */
    /* 1111001 == 0dB */
    /* 0110000 == -73dB */
    /* 0101111 == mute (0x2f) */

    /* OUT1 */
    wmcodec_write(LOUT1VOL, LOUT1VOL_LO1ZC | vol_l);
    wmcodec_write(ROUT1VOL, ROUT1VOL_RO1VU | ROUT1VOL_RO1ZC | vol_r);
}

void audiohw_set_lineout_vol(int vol_l, int vol_r)
{
    /* OUT2 */
    wmcodec_write(LOUT2VOL, LOUT2VOL_LO2ZC | vol_l);
    wmcodec_write(ROUT2VOL, ROUT2VOL_RO2VU | ROUT2VOL_RO2ZC | vol_r);
}

void audiohw_set_bass(int value)
{
    const int regvalues[] = {
        11, 10, 10, 9, 8, 8, 0xf, 6, 6, 5, 4, 4, 3, 2, 2, 1
    };

    if ((value >= -6) && (value <= 9)) {
        /* We use linear bass control with 200 Hz cutoff */
        wmcodec_write(BASSCTRL, regvalues[value + 6] | BASSCTRL_BC);
    }
}

void audiohw_set_treble(int value)
{
    const int regvalues[] = {
        11, 10, 10, 9, 8, 8, 0xf, 6, 6, 5, 4, 4, 3, 2, 2, 1
    };

    if ((value >= -6) && (value <= 9)) {
        /* We use linear treble control with 4 kHz cutoff */
        wmcodec_write(TREBCTRL, regvalues[value + 6] | TREBCTRL_TC);
    }
}

/* Nice shutdown of WM8975 codec */
void audiohw_close(void)
{
    audiohw_mute(true);

    /* 2. Disable all output buffers. */
    wmcodec_write(PWRMGMT2, 0x0);

    /* 3. Switch off the power supplies. */
    wmcodec_write(PWRMGMT1, 0x0);
}

void audiohw_set_nsorder(int order)
{
    (void)order;
}

/* Note: Disable output before calling this function */
void audiohw_set_sample_rate(int sampling_control)
{
  wmcodec_write(SAMPCTRL, sampling_control);
}

#ifdef HAVE_RECORDING
void audiohw_enable_recording(bool source_mic)
{
    wm8975_regs[PWRMGMT1] |= PWRMGMT1_AINL | PWRMGMT1_AINR
                           | PWRMGMT1_ADCL | PWRMGMT1_ADCR;
    wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]);

    /* NOTE: When switching to digital monitoring we will not want
     * the DACs disabled. Also the outputs shouldn't be disabled
     * when recording from line in (dock connector) - needs testing. */
    wm8975_regs[PWRMGMT2] &= ~(PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1
                               | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2);
    wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]);

    wm8975_write_or(LINVOL, LINVOL_LINMUTE);
    wm8975_write_or(RINVOL, RINVOL_RINMUTE);

    wmcodec_write(ADDCTRL3, ADDCTRL3_VROI);

    if (source_mic) {
        wmcodec_write(ADDCTRL1, ADDCTRL1_VSEL_LOWBIAS | ADDCTRL1_DATSEL_RADC
                              | ADDCTRL1_TOEN);
        wmcodec_write(ADCLPATH, 0);
        wmcodec_write(ADCRPATH, ADCRPATH_RINSEL_RIN2 | ADCRPATH_RMICBOOST_20dB);
    } else {
        wmcodec_write(ADDCTRL1, ADDCTRL1_VSEL_LOWBIAS | ADDCTRL1_DATSEL_NORMAL
                              | ADDCTRL1_TOEN);
        wmcodec_write(ADCLPATH, ADCLPATH_LINSEL_LIN1 | ADCLPATH_LMICBOOST_OFF);
        wmcodec_write(ADCRPATH, ADCRPATH_RINSEL_RIN1 | ADCRPATH_RMICBOOST_OFF);
    }
    wm8975_write_and(LINVOL, ~LINVOL_LINMUTE);
    wm8975_write_and(RINVOL, ~RINVOL_RINMUTE);
}

void audiohw_disable_recording(void) 
{
    /* mute inputs */
    wm8975_write_or(LINVOL, LINVOL_LINMUTE);
    wm8975_write_or(RINVOL, RINVOL_RINMUTE);

    wmcodec_write(ADDCTRL3, 0);

    wm8975_regs[PWRMGMT2] |= PWRMGMT2_DACL | PWRMGMT2_DACR
                           | PWRMGMT2_LOUT1 | PWRMGMT2_ROUT1
                           | PWRMGMT2_LOUT2 | PWRMGMT2_ROUT2;
    wm8975_write(PWRMGMT2, wm8975_regs[PWRMGMT2]);

    wm8975_regs[PWRMGMT1] &= ~(PWRMGMT1_AINL | PWRMGMT1_AINR
                               | PWRMGMT1_ADCL | PWRMGMT1_ADCR);
    wm8975_write(PWRMGMT1, wm8975_regs[PWRMGMT1]);
}

void audiohw_set_recvol(int left, int right, int type)
{
    switch (type)
    {
    case AUDIO_GAIN_MIC:  /* Mic uses right ADC */
        wm8975_regs[RINVOL] &= ~RINVOL_MASK;
        wm8975_write_or(RINVOL, left & RINVOL_MASK);
        break;
    case AUDIO_GAIN_LINEIN:
        wm8975_regs[LINVOL] &= ~LINVOL_MASK;
        wm8975_write_or(LINVOL, left & LINVOL_MASK);
        wm8975_regs[RINVOL] &= ~RINVOL_MASK;
        wm8975_write_or(RINVOL, right & RINVOL_MASK);
        break;
    default:
        return;
    }
}

void audiohw_set_monitor(bool enable)
{
    (void)enable;
}
#endif /* HAVE_RECORDING */