rockbox/utils/hwstub/hwstub_protocol.h

130 lines
4.1 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2012 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __HWSTUB_PROTOCOL__
#define __HWSTUB_PROTOCOL__
#define HWSTUB_CLASS 0xff
#define HWSTUB_SUBCLASS 0xac
#define HWSTUB_PROTOCOL 0x1d
#define HWSTUB_VERSION_MAJOR 3
#define HWSTUB_VERSION_MINOR 0
#define HWSTUB_VERSION_REV 0
#define HWSTUB_USB_VID 0xfee1
#define HWSTUB_USB_PID 0xdead
/**
* Control commands
*
* These commands are sent to the device, using the standard bRequest field
* of the SETUP packet. This is to take advantage of both wIndex and wValue
* although it would have been more correct to send them to the interface.
*/
/* list of commands */
#define HWSTUB_GET_LOG 0 /* optional */
#define HWSTUB_RW_MEM 1 /* optional */
#define HWSTUB_CALL 2 /* optional */
#define HWSTUB_JUMP 3 /* optional */
/**
* Descriptors can be retrieve using configuration descriptor or individually
* using the standard GetDescriptor request on the interface.
*/
/* list of possible information */
#define HWSTUB_DT_VERSION 0x41 /* mandatory */
#define HWSTUB_DT_LAYOUT 0x42 /* mandatory */
#define HWSTUB_DT_TARGET 0x43 /* mandatory */
#define HWSTUB_DT_STMP 0x44 /* optional */
struct hwstub_version_desc_t
{
uint8_t bLength;
uint8_t bDescriptorType;
/* full version information */
uint8_t bMajor;
uint8_t bMinor;
uint8_t bRevision;
} __attribute__((packed));
struct hwstub_layout_desc_t
{
uint8_t bLength;
uint8_t bDescriptorType;
/* describe the range of memory used by the running code */
uint32_t dCodeStart;
uint32_t dCodeSize;
/* describe the range of memory used by the stack */
uint32_t dStackStart;
uint32_t dStackSize;
/* describe the range of memory available as a buffer */
uint32_t dBufferStart;
uint32_t dBufferSize;
} __attribute__((packed));
struct hwstub_stmp_desc_t
{
uint8_t bLength;
uint8_t bDescriptorType;
/* Chip ID and revision */
uint16_t wChipID; /* 0x3780 for STMP3780 for example */
uint8_t bRevision; /* 0=TA1 on STMP3780 for example */
uint8_t bPackage; /* 0=169BGA for example */
} __attribute__((packed));
#define HWSTUB_TARGET_UNK ('U' | 'N' << 8 | 'K' << 16 | ' ' << 24)
#define HWSTUB_TARGET_STMP ('S' | 'T' << 8 | 'M' << 16 | 'P' << 24)
#define HWSTUB_TARGET_RK27 ('R' | 'K' << 8 | '2' << 16 | '7' << 24)
struct hwstub_target_desc_t
{
uint8_t bLength;
uint8_t bDescriptorType;
/* Target ID and name */
uint32_t dID;
char bName[58];
} __attribute__((packed));
/**
* HWSTUB_GET_LOG:
* The log is returned as part of the control transfer.
*/
/**
* HWSTUB_RW_MEM:
* The 32-bit address is split into two parts.
* The low 16-bit are stored in wValue and the upper
* 16-bit are stored in wIndex. Depending on the transfer direction,
* the transfer is either a read or a write.
* The read/write on the device are guaranteed to be 16-bit/32-bit when
* possible, making it suitable to read/write registers. */
/**
* HWSTUB_{CALL,JUMP}:
* The 32-bit address is split into two parts.
* The low 16-bit are stored in wValue and the upper
* 16-bit are stored in wIndex. Depending on the transfer direction,
* the transfer is either a read or a write. */
#endif /* __HWSTUB_PROTOCOL__ */